Get Ease of use and comfort -> Mirrors Guide for Peugeot 3008 SUV Third Generation (2024-2025)

Ease of use and comfort

► Adjust the height and reach to suit your

driving position.

► Push the control to lock the steering wheel.

After one hour, the function is deactivated; the

indicator lamp goes oﬀ.

consumption in turn decreases energy

consumption.

Heated seats

Prolonged use of heated seats is not

recommended for people with sensitive

skin.

For safety reasons, these adjustments

must only be carried out with the vehicle

stationary.

There is a risk of burns for people whose

perception of heat is impaired (e.g. illness,

taking medication).

To keep the heated pad intact and to prevent

a short circuit:

Mirrors

Door mirrors

– Do not place heavy or sharp objects on the

seat.

As a safety measure, the mirrors should

be adjusted to reduce the "blind spots".

The objects that you see in the mirrors are

in fact closer than they appear. Take this

into account in order to correctly judge the

distance of vehicles approaching from behind.

The function is active only with the engine

running and when the outside temperature is

below 20°C.

► Press the button corresponding to the seat.

► Each press changes the heating level; the

corresponding number of indicator lamps come

on.

► To switch oﬀ the heating, press the button

until all of the indicator lamps are oﬀ.

The system status is memorised when the

ignition is switched oﬀ.

– Do not kneel or stand on the seat.

– Do not spill liquids onto the seat.

– Never use the heating function if the seat

is damp.

Steering wheel

adjustment

Do not use the function when the seat

is not occupied.

Reduce the heating intensity as soon as

possible.

When the seat and passenger compartment

have reached a satisfactory temperature,

switch the function oﬀ; reducing electrical

► When stationary, pull the control to release

the steering wheel.

CarManuals2.com

Ease of use and comfort

Adjustment

For more information on Rear screen

demisting/defrosting, refer to the

corresponding section.

► From the inside, with the

ignition on, place control A in the

central position.

► Pull control A backwards.

Interior rear view mirror

► Lock the vehicle from the outside.

Equipped with an anti-dazzle system, which

darkens the mirror glass and reduces the

nuisance to the driver caused by the sun,

headlamps of other vehicles, etc.

If the mirrors are folded using control A,

they will not unfold when the vehicle is

unlocked.

Manual model

Electric unfolding

Day/night position

► From outside: unlock the vehicle.

► From inside: with the ignition on, place

control A in the central position and then pull it

rearwards.

► Move control A to the right or to the left to

select the corresponding mirror.

► Move control B in any of the four directions

to adjust.

With Touch screen 10" & Bluetooth

Radio & Telephone

The automatic door mirror folding/

unfolding function is conﬁgured in the

Driving touch screen menu.

► Pull the lever to change to the anti-dazzle

"night" position.

► Return control A to its central position.

► Push the lever to change to the normal "day"

position.

Adjustment

Manual folding

The mirrors can be folded manually (parking

obstruction, narrow garage, etc.).

With PEUGEOT i-Connect Advanced

The automatic door mirror folding/

unfolding function is conﬁgured in the

Settings > Vehicle touch screen application.

► Adjust the mirror to the normal "day" position.

► Turn the mirror towards the vehicle.

Electric folding

Depending on equipment, the door mirrors can

be folded electrically.

Demisting/Defrosting

The demisting/defrosting of the door

mirrors works with the demisting/

defrosting of the rear screen.

CarManuals2.com

Ease of use and comfort

Reﬁtting a head restraint

Automatic "electrochrome" models

The rear seat cushion remains ﬁxed. To

increase the boot loading volume, tilt the

bench seat backrest.

► Insert the head restraint rods into the guides

in the corresponding backrest.

► Push the head restraint fully down.

► Press the lug A to release the head restraint

and push it down.

Rear head restraints

Never drive with passengers seated at

the rear when the head restraints are

removed; the head restraints should be in

place and in the high position.

The head restraint for the centre seat

and those for the outer seats are not

interchangeable.

The electrochrome system uses a sensor that

detects the level of exterior brightness and that

coming from the rear of the vehicle, in order to

automatically and gradually switch between day

and night usage.

Folding the backrests

They have two positions:

Manoeuvring the backrests should only

be done when the vehicle is stationary.

– A high position, for when the seat is in use:

► Pull the head restraint fully up.

– A low position, for stowing, when the seat is

not in use:

► Press the lug A to release the head

restraint and push it down.

First steps:

► Lower the head restraints.

To ensure optimum visibility while

manoeuvring, the mirror automatically

brightens when reverse gear is engaged.

The system is deactivated if the load in the

boot exceeds the height of the load space

cover or if the load space cover has items

placed on it.

► If necessary, move the front seats forward.

► Check that no person or object might interfere

with the folding of the backrests (e.g. clothing,

luggage).

► Check that the seat belts are free, not

engaged in the buckles. Release them so that

the backrest can be moved.

The rear head restraints can be removed.

Removing a head restraint

► Release the backrest using control 1.

► Tilt the backrest slightly forwards.

► Pull the head restraint fully up.

► Press the lug A to release the head restraint

and remove it completely.

Rear bench seat

Bench seat with ﬁxed cushions and split folding

backrests (2/3-1/3) to adapt the boot load space.

CarManuals2.com

Ease of use and comfort -> Mirrors for Your Peugeot 3008 SUV Third Generation (2024-2025)

Related Topics

Ease of use and comfort