Get Lighting and visibility -> Automatic illumination of headlamps Guide for Peugeot 3008 SUV Third Generation (2024-2025)

Lighting and visibility

As soon as the brightness returns to a suﬃcient

level or after the windscreen wipers are switched

oﬀ, the lamps are switched oﬀ automatically.

Automatic adjustment of

the Full LED technology

headlamps

This system automatically adjusts the height

of the headlamp beams according to diﬀerent

parameters (e.g. vehicle load).

In the event of a malfunction, this warning

lamp lights up on the instrument panel,

accompanied by the display of a message and

an audible signal.

The system places the headlamp beams in the

lowest position.

Headlamp beam height

adjustment

Malfunction

Manual headlamp

adjustment

In the event of a malfunction of the rain/

sunshine sensor, the vehicle’s lamps

come on and this warning lamp is displayed on

the instrument panel, accompanied by an

audible signal and/or the display of a message.

Have it checked by a PEUGEOT dealer or a

qualiﬁed workshop.

Do not cover the rain/sunshine sensor

located at the top centre of the

windscreen behind the interior rear view

mirror; the associated functions would no

longer be controlled.

Have it checked by a PEUGEOT dealer or a

qualiﬁed workshop.

To avoid dazzling other road users, the height

of the headlamp beams must be adjusted

according to the load in the vehicle.

Do not touch the LED or Full LED

technology headlamps - risk of

electrocution!

(Initial setting)

In fog or snow, the rain/sunshine sensor

may detect suﬃcient light. For this

reason, the lighting will not come on

automatically.

Driver only or driver + front passenger

5 people

5 people + load in the boot

Driver only + load in the boot

Automatic illumination of

lamps

4 5 6 Not used

With the lighting control stalk in the “AUTO”

position and if a low level of exterior brightness

is detected by the rain/sunshine sensor, the

number plate lamps, sidelamps and dipped

beam headlamps are switched on automatically,

without any action on the part of the driver. They

may also come on if rain is detected, at the same

time as automatic operation of the windscreen

wipers.

The inner surface of the windscreen may

become misted up and aﬀect the proper

operation of the rain/sunshine sensor.

In humid and cold weather, demist the

windscreen regularly.

This information is provided as a guide only.

Depending on version, the unused positions may

be required.

CarManuals2.com

Lighting and visibility

Manual

With PEUGEOT i-Connect Advanced -

PEUGEOT i-Connect

Guide-me-home and

welcome lighting

You can activate/deactivate this function

and adjust the duration of the welcome

lighting in the Settings > Vehicle touch screen

application.

Guide-me-home lighting

Automatic

With the ring of the lighting control stalk in the

"AUTO” position and when the light is poor, the

dipped beam headlamps come on automatically

when the ignition is switched oﬀ.

Door mirror spotlamps

These spotlamps facilitate access to the vehicle

by lighting the ground near the front doors.

The spotlamps come on automatically:

– when the vehicle is unlocked.

► With the ignition oﬀ, pull the lighting control

stalk toward you ("headlamp ﬂash") to activate/

deactivate the function.

With Touch screen 10" & Bluetooth Radio

& Telephone

– when a door is opened.

You can activate/deactivate this function

and adjust the guide-me-home lighting

– when a request to locate the vehicle is

received from the remote control.

Manual guide-me-home lighting goes oﬀ

automatically after a period of time.

duration in the Driving touch screen menu.

They also come on with the welcome lighting

and guide-me-home lighting functions.

They go oﬀ automatically after 30 seconds.

Welcome lighting

With PEUGEOT i-Connect Advanced -

PEUGEOT i-Connect

When the vehicle is unlocked, if the ambient

light is low and the "Automatic illumination of

headlamps" function is activated, this system

automatically turns on certain exterior lamps

as well as certain lamps in the passenger

compartment.

You can activate/deactivate this function

and adjust the duration of the guide-me-

home lighting in the Settings > Vehicle touch

screen application.

Automatic lighting

systems - General

recommendations

The automatic lighting systems use a detection

camera, located at the top of the windscreen.

With Touch screen 10" & Bluetooth Radio

& Telephone

You can activate/deactivate this function

and adjust the welcome lighting duration

in the Driving touch screen menu.

Operating limits

The system may be disrupted or not work

correctly:

– When visibility conditions are poor

(e.g. snowfall, heavy rain).

CarManuals2.com

Lighting and visibility

– If the windscreen is dirty, misted-up or

masked (e.g. sticker) in front of the camera.

– If the vehicle is facing highly reﬂective signs

or safety barrier reﬂectors.

The system is not able to detect:

– Road users that do not have their own

lighting, such as pedestrians.

– Vehicles with hidden lighting (e.g. travelling

behind a safety barrier on the motorway).

– Vehicles at the top or bottom of a steep

slope, on winding roads, on crossroads.

Available only on versions equipped with Full

LED technology headlamps.

The system becomes operational when

the vehicle exceeds 16 mph (25 km/h).

When the speed falls below 9 mph (15 km/h),

the function is no longer operational.

With the ring of the lighting control stalk in the

"AUTO" position and the function activated on

the touch screen, this system automatically

switches between dipped and main beam

headlamps, according to lighting and traﬃc

conditions, using a camera located at the top of

the windscreen.

Activation/Deactivation

With Touch screen 10" & Bluetooth Radio

& Telephone

The settings are changed via the Driving

touch screen menu.

With PEUGEOT i-Connect Advanced -

PEUGEOT i-Connect

Maintenance

Clean the windscreen regularly,

particularly the area in front of the camera.

The internal surface of the windscreen can

also become misted around the camera.

In humid and cold weather, demist the

windscreen regularly.

The settings are changed via the

Settings > Vehicle touch screen

application.

The state of the system is stored when the

ignition is switched oﬀ.

Do not allow snow to accumulate on the

bonnet or roof of the vehicle as this could

obstruct the camera.

When the system detects thick fog, it

temporarily deactivates the function.

Operation

If the ambient light level is very low and traﬃc

conditions permit:

Automatic headlamp

dipping

– The main beam headlamps

come on automatically. These

indicator lamps light up on the instrument panel.

If the ambient light level is suﬃcient and/or the

traﬃc conditions do not allow the main beam

headlamps to be lit:

This system is a driving aid.

The driver remains responsible for

the vehicle's lighting, its correct use in the

prevailing light, visibility and traﬃc conditions,

and for compliance with driving and vehicle

regulations.

For more information, refer to the

General recommendations for

automatic lighting systems.

CarManuals2.com

Lighting and visibility -> Automatic illumination of headlamps for Your Peugeot 3008 SUV Third Generation (2024-2025)

Related Topics

Lighting and visibility