Lighting and visibility -> Headlamp beam height adjustment for Your Peugeot 3008 SUV Third Generation (2024-2025)

Lighting and visibility  
As soon as the brightness returns to a sufficient  
level or after the windscreen wipers are switched  
off, the lamps are switched off automatically.  
Automatic adjustment of  
the Full LED technology  
headlamps  
This system automatically adjusts the height  
of the headlamp beams according to different  
parameters (e.g. vehicle load).  
In the event of a malfunction, this warning  
lamp lights up on the instrument panel,  
accompanied by the display of a message and  
an audible signal.  
The system places the headlamp beams in the  
lowest position.  
Headlamp beam height  
adjustment  
4
Malfunction  
Manual headlamp  
adjustment  
In the event of a malfunction of the rain/  
sunshine sensor, the vehicle’s lamps  
come on and this warning lamp is displayed on  
the instrument panel, accompanied by an  
audible signal and/or the display of a message.  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
Do not cover the rain/sunshine sensor  
located at the top centre of the  
windscreen behind the interior rear view  
mirror; the associated functions would no  
longer be controlled.  
Have it checked by a PEUGEOT dealer or a  
qualified workshop.  
To avoid dazzling other road users, the height  
of the headlamp beams must be adjusted  
according to the load in the vehicle.  
Do not touch the LED or Full LED  
technology headlamps - risk of  
electrocution!  
0
(Initial setting)  
In fog or snow, the rain/sunshine sensor  
may detect sufficient light. For this  
reason, the lighting will not come on  
automatically.  
Driver only or driver + front passenger  
5 people  
5 people + load in the boot  
Driver only + load in the boot  
1
2
3
Automatic illumination of  
lamps  
4 5 6 Not used  
With the lighting control stalk in the “AUTO”  
position and if a low level of exterior brightness  
is detected by the rain/sunshine sensor, the  
number plate lamps, sidelamps and dipped  
beam headlamps are switched on automatically,  
without any action on the part of the driver. They  
may also come on if rain is detected, at the same  
time as automatic operation of the windscreen  
wipers.  
The inner surface of the windscreen may  
become misted up and affect the proper  
operation of the rain/sunshine sensor.  
In humid and cold weather, demist the  
windscreen regularly.  
This information is provided as a guide only.  
Depending on version, the unused positions may  
be required.  
61