2024-2025 Peugeot 3008 SUV PEUGEOT i-Connect Advanced - PEUGEOT i-Connect User Manual

MY CAR USER MANUAL

PEUGEOT i-Connect Advanced - PEUGEOT i-Connect for Your Peugeot 3008 SUV Third Generation (2024-2025)

PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
The message Energy economy mode is  
displayed when the system is about to go  
into standby.  
For more information on Energy economy  
mode, refer to the "Practical information"  
section.  
– Audio equipment and telephone controls with  
display of associated information.  
– Connected services and display of associated  
information.  
– Navigation system controls and display  
of associated information (depending on  
equipment).  
PEUGEOT i-Connect  
Advanced - PEUGEOT  
i-Connect  
11  
GPS navigation -  
Applications - Multimedia  
audio system - Bluetooth®  
telephone  
– Voice recognition (depending on equipment).  
– Time and outside temperature.  
– Heating/air conditioning system controls and  
reminders of settings.  
The AM radio selection mode is not  
available on electric vehicles.  
Warning  
– Settings for driving aid functions, comfort  
and safety functions, extended head-up display  
(depending on equipment and version), audio  
equipment and digital instrument panel.  
– Settings for functions specific to electric  
vehicles.  
– Display of visual manoeuvring aid functions.  
– Interactive handbook.  
– Video tutorials (e.g. screen management,  
driving aids, voice recognition).  
Navigation is a driving aid. It cannot  
replace the driver. All guidance instructions  
should be carefully checked by the user.  
By using the navigation, you accept the  
following terms and conditions:  
https://www.tomtom.com/en_gb/legal/  
eula-automotive/?388448  
The functions and settings described  
vary according to the version and  
configuration of the vehicle, and according to  
the country of sale.  
For safety reasons and because they  
require continued attention on the part of  
the driver, the following operations must be  
carried out with the vehicle stationary and  
the ignition on:  
– Pairing the smartphone with the system via  
Bluetooth®.  
– Using the smartphone.  
– Connecting to Mirror Screen  
(Apple®CarPlay® or Android Auto).  
– Changing the system settings and  
configuration.  
First steps  
Upper banner  
The system starts when the ignition is  
switched on.  
Certain information is displayed permanently in  
the upper banner of the touch screen:  
– Outside temperature from the vehicle's  
sensors (associated with a blue symbol if there is  
a risk of ice).  
– Temperature setting reminder for the air  
conditioning on the driver's and passenger sides.  
– Charge level of the connected smartphone.  
– System connection status (Bluetooth®, Wi-Fi,  
mobile telephone network).  
Short press, ignition off: system on/off.  
Short press, ignition on: mute/restore sound.  
Long press, ignition on: start standby mode  
(mute sound, screens and clock display off).  
Rotation: volume adjustment.  
Information  
This system gives access to the following  
elements:  
211  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
– Time.  
Access to additional information about the  
function.  
Access to a function’s settings.  
– Screen configuration, appearance, i-Toggles  
(depending on equipment).  
– Audio settings, favourite radio stations.  
– Lighting, interior ambience (refer to the "Ease  
of use and comfort" section).  
– Quick access to the Mirror Screen® functions  
(associated with a connected smartphone).  
Swipe down from the upper edge of the touch  
screen to access the notifications centre and  
display a list of quick settings :Guest, Privacy  
Settings, Brightness, My Devices, night mode,  
Add/delete shortcuts.  
– Navigation history, favourite points of interest  
(POIs), navigation settings.  
Configuring profiles  
etc.  
– Some driving aids and the list of favourites.  
To delete a profile, select it from the list of  
profiles then press the bin.  
Press the "Settings" application.  
Principles  
► Use this button (HOME) to display the  
In the list, select the "Profile" tab.  
Privacy Settings  
The "Privacy Settings" management is  
associated with each profile. This function is  
used with:  
a "Guest" profile configured by default in "Private  
Mode",  
or  
a profile to be created in the system, with or  
without connection to a mobile device.  
For each profile (even "Guest"), the last privacy  
mode saved value will be restored.  
"Sharing Data and Location"  
This mode allows the vehicle to externally  
transmit all the personal data needed for each  
valid available connected service.  
most recent home page used; a second  
press displays the first home page, then press  
the virtual buttons displayed on the touch screen.  
Scroll through the home pages by sliding  
your finger along the screen to the right or  
to the left.  
The screen displays a "Guest" profile built  
into the system and allows you to create and  
personalise several new profiles with or without  
an associated mobile device.  
The "Guest" profile has a default display  
with the possibility of adding to it and/or  
returning it to its initial configuration. This profile  
is built into the system and cannot be deleted.  
Each profile created can be associated  
with a mobile device of your choice  
connected via Bluetooth®; the Bluetooth® function  
of the mobile device must first be activated. This  
association allows the system to detect your  
presence in the vehicle when it starts and to  
propose the activation of your personalised  
profile.  
If a profile is not connected to the mobile device,  
the last profile used will be highlighted.  
Select "Create Profile", then follow the  
procedure.  
Principle of movement in the system  
Depending on the pages displayed on the  
screen, scroll through the text or the menu (on  
the left side of the screen) by sliding your finger,  
as with a smartphone.  
Touch buttons  
Display/hide the context menu.  
Return to the previous page.  
The personal data required to use the  
connected services is sent to the  
providers of these services.  
► To change the status of a function, press the  
description for the corresponding line (change  
confirmed by the slider moving to the right/left:  
function activated/deactivated).  
"Sharing Data"  
This mode allows the vehicle to externally  
transmit all the data needed for each valid  
Creating a new profile allows you to personalise:  
– Language, units, Privacy Settings.  
212  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
available connected service, with the exception  
of vehicle location data (e.g. GPS coordinates).  
To change mode, swipe down from the upper  
edge of the touch screen to display all of the  
quick settings.  
Press this button and select the chosen  
mode. The mode is highlighted.  
OR  
an access key to saved personal information.  
First activate the mobile device’s Bluetooth®  
function.  
11  
Some connected services may not  
function without the vehicle location data.  
Select the desired application, authentication will  
be requested if necessary. This authentication  
will be saved for future uses via the mobile  
device connected to the current profile.  
An authentication will be requested at each use if  
the mobile device is not connected to the current  
profile or if the Guest profile is used.  
With the use of the “Guest” profile, an  
identification will be requested for each  
use.  
This mode will not be applied to the  
emergency call function or to specific  
services to which the user has consented  
under the terms of commercial contracts  
(e.g. Connected alarm).  
Press the "Settings" application.  
In the list, select the "Connectivity" tab.  
Select "Privacy Settings".  
Choose the mode.  
"Private Mode"  
This mode does not allow the vehicle to  
transmit personal data outside the vehicle.  
Internet portal  
Updating the system  
Connected services will only perform  
local processing inside the vehicle with  
limited functions.  
During the first use, upon acquisition of the  
vehicle, the user is invited to select the country  
of residence for the use of the Internet portal.  
If the country is not selected, the notification is  
stored in the notification centre and disappears  
once the country is selected. Slide a finger on  
the touch screen from top to bottom to display all  
the notifications.  
Managing devices remotely and  
remote updating of software and  
firmware.  
Being an integral part of the service used to  
provide connected services contract(s), the  
required management of devices as well as  
the required updating of the software and  
firmware associated with the aforementioned  
connected service will be carried out remotely,  
in particular using "Over the Air" technology.  
To do this, a secure connection via radio  
network is established between the vehicle  
and the Manufacturer's device management  
server each time the ignition is switched on,  
when a mobile telephone network is available.  
Depending on the vehicle's equipment,  
the connection configuration must be set  
This mode will not be applied to the  
emergency call function or to specific  
services to which the user has consented  
under the terms of commercial contracts  
(e.g. Connected alarm).  
The selection of a country is necessary to use  
the available internet applications.  
Press the "Settings" application.  
Professional purposes  
If the vehicle is used for professional  
purposes or under the terms of specific  
contracts (e.g. corporate fleet, government  
assignment), some privacy modes will not  
be available for the user on the screen,  
depending on the data sharing needs of the  
services.  
In the list, select the "Connected Services".  
Choose the country.  
The first time you use it, via a connected  
mobile device, the system links to your  
profile. The connected mobile device serves as  
213  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
to "Connected vehicle" to enable to the  
connection to the radio network.  
minutes. A notification will give an estimate of the  
Personalisation  
duration and a description of the update.  
Update information is available through the  
"Settings" application.  
Press and hold the screen from one of the  
system's home pages.  
Irrespective of a valid subscription to a  
connected service, the remote management  
of devices relating to or connected with  
the security of devices, and the updating  
of software and firmware, will be carried  
out when necessary in order to comply  
with a legal requirement applicable to the  
Manufacturer (e.g. the applicable law in terms  
of product liability, the regulations governing  
e-call) or when necessary to protect the  
respective vital interests of the vehicle's users  
and passengers.  
The establishment of a secure connection via  
radio network and the corresponding remote  
updates are not affected by the privacy  
settings and are intended to be carried out  
after being initialised by the user in response  
to a related notification.  
Or  
Press the "Settings" application.  
Press the "Settings" application.  
In the list, select the "Updates" tab.  
This button allows you to change the  
authorisation for automatic downloading  
of updates via an exterior Wi-Fi network.  
In the list, select the "Customization" tab.  
Press the "Displays" field.  
A page divided into 2 parts is displayed.  
Press the HOME button at any time to leave this  
page.  
For safety reasons and because it  
requires sustained attention on the part  
of the driver, the installation must be carried  
out with the ignition on but without starting the  
engine.  
The installation cannot be carried out in the  
following cases:  
– engine running.  
Personalising the screen  
Press the pencil in the "Customize  
Touchscreen" part.  
A representation of the organisation of the  
different home page (HOME) Widgets is  
displayed.  
– emergency call in progress.  
– insufficient battery level.  
– when charging for electric vehicles.  
A Widget is a reduced window of an  
application or service.  
The system can notify the receipt of an update  
when it is connected to an exterior Wi-Fi network  
or a mobile telephone network.  
Large updates are downloaded only via the Wi-Fi  
network.  
The availability of an update is notified on the  
screen at the end of the journey with an option  
of immediate installation or postponement of  
installation.  
The installation time is variable and can take  
several minutes with a maximum of about 30  
If an update has failed or has expired, contact a  
dealer or a qualified workshop.  
Adding a Widget  
To add a Widget, press "Widget" on the  
left of the screen.  
The Manufacturer does not charge for  
the use of this service.  
Or  
However, the use of Wi-Fi and/or mobile  
telephone networks by your smartphone may  
incur extra charges if you exceed the data  
allowance included in your contract.  
Any associated costs will be billed to you by  
your mobile telephone operator.  
Press one of these buttons on the screen.  
Select the desired Widget.  
Press the back arrow to return to the  
previous page.  
214  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
Organising the Widgets on a home  
page (HOME)  
To move a Widget, press and hold it, then drag it  
to the desired location.  
Select the desired Widget.  
Press the back arrow to return to the  
Mirror Screen® connected (short press): access  
the projected view of the telephone application of  
your Mirror Screen® equipment.  
Radio: automatic search for the previous/  
next station (in the list of radio stations  
sorted by name or by frequencies).  
Media: previous/next track, movement in the  
lists.  
11  
previous page.  
Deleting a Widget  
To move a Widget to the bin, press and  
hold it, then drag it to the bin.  
Adding a page  
To add a page, press "Page" on the left of  
the screen.  
Short press: validate a selection. Out of  
selection, display the favourite lists.  
Media (short press): change the  
multimedia source.  
Radio: display the list of favourite  
stations.  
Media: display the list of tracks.  
Press the back arrow to return to the  
previous page.  
Steering-mounted  
controls  
Deleting a Widget  
Voice control:  
To move a Widget to the bin, press and  
hold it, then drag it to the bin.  
Short press, system voice commands  
(depending on equipment).  
Long press, voice commands of the smartphone  
connected using Bluetooth® or Mirror Screen®  
(Apple®CarPlay®/Android Auto) via the system.  
Increase volume.  
Personalising the  
instrument panel  
Applications  
Press the pencil in the "Customize  
Driver Information" part.  
From the home page, press this button to  
access the applications wall.  
Decrease volume.  
Mute the sound: long press on the  
decrease volume button.  
Restore the sound by pressing one of the two  
volume buttons.  
Incoming call (short press): accept the  
call.  
Call in progress (short press): hang up.  
Incoming call (long press): refuse the incoming  
call.  
The modification of the organisation of the  
different Widget is displayed on the instrument  
panel in real time.  
From any page, press the touch screen  
with three or more fingers to display the  
applications wall.  
A Widget is a reduced window of an  
application or service.  
Help  
Access the handbook and watch tutorials.  
Media  
Select an audio source or radio station.  
Mirror Screen®  
Adding a Widget  
To add a Widget, press "Widget" on the  
left of the screen.  
Smartphone connected with Mirror  
Screen®: access to the projected view of  
Apple®CarPlay® or Android Auto.  
Out of call (short press): access the call log of  
the telephone connected via Bluetooth®.  
Or  
Press one of these buttons on the screen.  
215  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
Smartphone not connected: access the menu  
allowing you to connect a smartphone.  
Navigation  
(depending on equipment)  
Enter navigation settings and choose a  
destination.  
Brazilian, Chinese, Danish, Spanish, Hebrew,  
If the system has not taken your command into  
account, it will indicate this by a voice message  
and an on-screen display.  
Italian, Japanese, Dutch, Norwegian, Polish,  
Portuguese, Russian, Swedish, Czech, Turkish)  
available with the cellular network and in line  
with the language chosen and previously  
configured in the system.  
Press the "Settings" application.  
In the list, select the "Voice Assistant" tab.  
Use services available in real time, depending on  
equipment.  
Voice commands  
(depending on equipment)  
Use the system or smartphone voice recognition  
via the system.  
The system supports two languages for cases  
where the area in which the vehicle is travelling  
is not covered by the cellular network.  
These languages, referred to as on-board  
languages, are downloaded into the system.  
If the chosen language has not been  
downloaded, a message on the screen appears  
as soon as the cellular network is not connected  
for the first time and offers to download it.  
To use this new language in all areas, download  
it beforehand (ignition on without starting the  
engine) via the Wi-Fi network.  
Activate/Deactivate:  
– "Listen for (OK Peugeot)": to invoke the  
voice recognition using the keyword "OK  
Peugeot".  
– "Data Usage": to authorise our supplier to  
re-use your data in order to let him globally  
improve its capabilities in term of voice  
recognition and voice assistance.  
Phone  
Telephone not connected: access the  
menu allowing you to connect a telephone.  
Telephone connected: access the call log,  
contacts and telephone settings.  
Two connected telephones: access the contents  
of the priority telephone with the possibility of  
changing the priority of the telephone.  
Settings  
Voice Assistant/Data Usage  
Vehicle's location and voice recordings  
are not concerned; only textual transcriptions  
of your conversations with the voice assistant  
are kept after to be pseudonymised.  
Apply the download procedure displayed on the  
screen.  
Downloading this new language removes the  
least used on-board language.  
Main settings for the audio system, touch  
screen and digital instrument panel.  
Opening voice recognition  
Information - Using the  
system  
When voice commands are  
activated, say your command after  
the audible signal.  
For commands in several stages, interaction  
takes place with the system to complete the  
initial request.  
Voice commands can be used on  
any screen page, provided there  
are no other sources which take priority in use  
(reverse, emergency or assistance call,  
telephone call, other smartphone voice  
recognition already launched).  
Choice of opening voice recognition:  
► Say "OK Peugeot".  
Voice commands  
First steps  
(depending on equipment)  
The voice recognition service offers a  
choice of 20 languages minimum (French,  
German, English (UK), English (US), Arabic,  
or  
Some commands self-validate after 7 seconds.  
216  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
► Press the button located on the steering  
wheel.  
or  
"tune to 88.5"  
Media voice commands are only  
Navigation  
11  
available with an USB connection.  
Navigation home screen  
(depending on equipment)  
► Press the touch screen button.  
Voice command example for  
navigation:  
"navigate home"  
"Navigate me to gabrielle's house"  
"search for public parking nearby"  
To ensure that voice commands are  
always recognised by the system, please  
follow these recommendations:  
– Use natural language in a normal tone  
without breaking up words or raising your  
voice.  
– After opening voice recognition with the  
steering wheel-mounted button or the button  
on the touch screen, always wait for the  
"beep" (audible signal) before talking. No  
"beep" sounds when voice recognition is  
opened using "OK Peugeot".  
– For optimal operation, it is recommended  
that you close the windows and the sunroof  
(depending on equipment) to avoid any  
external interference, and switch the  
ventilation off.  
Access to additional videos  
Depending on the country, give  
destination (address) instructions in the  
language configured for the system.  
https://www.tomtom.com/  
PSAGroup-Connected-Nav  
Voice command example for  
telephone:  
"Call Matthew's mobile"  
"call 0113 345 9869"  
"Call jonathan"  
Press the "Navigation" application to  
display the navigation home screen.  
Press "Search" to enter an address or a  
name.  
Press this button to display the main  
menu for the various options.  
Press this button to display the 3D/2D  
mode.  
If there is no telephone connected by  
Bluetooth®, a pop-up window appears:  
"Connect a telephone by Bluetooth®", and  
the voice session will be closed.  
– Before speaking the voice commands, ask  
the other passengers not to speak.  
Select "Sound activated", "Alerts only"  
and "Silent" with successive presses on  
this button.  
Voice command example for the  
weather:  
"do i need a raincoat"  
"how is the weather tonight"  
"what is today's humidity level"  
Voice command example for air  
conditioning:  
"raise the fan speed"  
"Turn on air conditioning"  
"i'm too hot"  
Voice command example for radio  
and media:  
"I want to listen to michael jackson"  
"switch to radio"  
Press the "plus"/"minus" buttons to zoom  
in/out, or use two fingers on the screen.  
Main menu  
Press the "Navigation" application to  
display the navigation home screen.  
Press this button to display the main  
menu for the various options.  
217  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
Select "Search" to enter an address,  
name or some points of interest.  
Select "Go home" using an address  
previously saved in "Add home".  
Select "Go to work" using an address  
previously saved in "My places".  
Select "Recent destinations" to display  
the latest destinations searched.  
Select "Current trip" to open another  
menu and perform various actions for the  
current planned route.  
Regular connection to a secure Wi-Fi  
access point automatically updates the  
installed mapping globally.  
The mapping is also updated using a cellular  
network, depending on version, country of  
sale, the vehicle's level of equipment, as well  
as the subscription to connected services and  
options.  
However, using your smartphone's Wi-Fi  
and/or cellular networks may incur additional  
charges if you exceed your data plan.  
These charges, if any, will be passed on to  
your telephone operator's bill.  
The mobile device is in charging mode when  
connected with the USB cable.  
It is recommended that you use your  
device's original USB cables, preferably  
with a short cable to ensure optimum  
performance.  
To protect the system, do not use a USB  
hub.  
Bluetooth® connection  
Select "My places" for quick access to  
saved places as well as favourite  
destinations.  
Connecting a mobile device to the vehicle's  
system via Bluetooth® provides access to its  
contents and its "Media" streaming. It also  
enables the Phone function to be activated.  
The connection can be initiated either from the  
mobile device's Bluetooth® menu or from the  
vehicle's system, which requires opening the "My  
Devices" menu for the first connection.  
Select "My trips" to display your favourite  
routes.  
Select "Parking" to display the various  
parking options in the area.  
Connectivity  
Connecting a wired device  
by USB  
The USB connection of a mobile device allows it  
to be recharged. It makes its authorised media  
content available to the system (Media content  
of iPod® type).  
Only one USB socket will allow a Mirror  
Screen connection (Apple®CarPlay® or  
Android Auto) for the compatible connected  
mobile devices and to use some of the device's  
applications on the touch screen.  
For more information on the USB socket  
compatible with the Mirror Screen® function,  
refer to the "Ease of use and comfort - Fittings"  
section.  
Select "Service station" to display the  
different service stations on the current  
route or near the current location.  
Select "TomTom service" to check the  
network status.  
In some cases, you will need to unlock  
your device and check the authorisation  
to synchronise contacts and recent calls.  
Some features may not be supported by your  
device.  
For information on the partial or full  
compatibility of device models or  
smartphones, please connect to the Brand’s  
national website.  
Select "Settings" to enter the vehicle type  
and to personalise the display, voice  
instructions, map options, trip planning, sounds  
and alerts, and system information.  
Select this button to display details on  
software versions as well as legal  
information. Details of the Open Source software  
libraries used and their licence URLs.  
218  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
Pairing procedure from a device  
This is to allow the system to make its  
Bluetooth® visible for the connection of a new  
device.  
The system is disconnected when the driver’s  
door is opened and the ignition is switched  
off.  
allowed to connect. WPA2 encryption level,  
equivalent to a domestic level, is required.  
11  
From the Bluetooth® menu on your mobile  
device, select the system’s name from the  
list of detected devices.  
Any network already connected to the  
system will reconnect automatically as  
soon as it is detected by the system and after  
having previously activated the Wi-Fi function.  
In order to make your system’s  
Bluetooth® visible, first open the "My  
Devices" menu on the system.  
Automatic reconnection  
The Wi-Fi connection of the system to a  
device already connected using a Mirror  
Screen® wireless connection is not possible.  
In this case, favour a Mirror  
Continue the first connection procedure  
proposed by the system and on the device.  
For example: validating pairing codes.  
The system allows automatic reconnection of  
devices already connected and detected when a  
user profile is selected.  
The priority reconnected devices are those which  
have been linked to the selected user profile or,  
failing this, the last connected devices.  
Pairing procedure from the system  
Screen® connection using the USB socket.  
Press the "Settings" application.  
Device management  
In the list, select the "Connectivity" tab.  
Select "My Devices".  
Wi-Fi connection  
The system has an external Wi-Fi connection  
mode for performing system updates.  
Press the "Settings" application.  
For each device already connected to the  
system using a wireless connection (Bluetooth®  
or wireless Mirror Screen® connection), it is  
possible to determine a preferred connection  
mode (depending on the functions the device  
can support). It is therefore possible to determine  
whether the device should be connected using  
a wireless Bluetooth® connection or a wireless  
Mirror Screen® connection each time the system  
is started once the profile is chosen.  
Select the name of the mobile device that  
you want to connect, from:  
– The list of known devices (if the device has  
already been connected to the system).  
or  
– The list of detected devices (if the device  
has never been connected to the system or  
previously deleted from the system).  
In the list, select the "Connectivity" tab.  
Select "Wi-Fi".  
Activate/Deactivate "Wi-Fi".  
The system starts a search for  
nearby Wi-Fi networks. This may take a few  
seconds.  
Select the Wi-Fi network to connect to and enter  
its password.  
Press the "Settings" application.  
A mobile device already connected to the  
system will be able to reconnect  
automatically when the vehicle is started,  
once the user profile has been selected.  
Automatic reconnection is put on hold as  
soon as the "My Devices" menu is opened.  
In the list, select the "Connectivity".  
Select "My Devices" to display the list of  
paired devices.  
To protect your system, only networks  
with a sufficient level of security are  
Press this button to manage the  
connection of a device.  
219  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
Choose a connection type then confirm this  
choice by pressing “APPLY".  
First activate the Siri® function on your  
Apple® smartphone.  
If the device fails to connect, refer to the  
Apple website to check that the device is  
compatible with this function.  
The wireless connection of an Apple®CarPlay®  
smartphone can be initiated from the "My  
Devices" menu.  
First activate the smartphone’s CarPlay®  
function.  
Deleting a device  
Press the "Settings" application.  
If the problem persists, delete all saved  
connections on the smartphone and on the  
system before attempting a new connection.  
In the Bluetooth menu, click on the "i" next to  
the relevant vehicle and activate CarPlay.  
Press the "Settings" application.  
In the list, select the "Connectivity".  
Select "My Devices" to display the list of  
paired devices.  
The cable connection requires that you  
deactivate the CarPlay function in the Settings,  
Bluetooth menu of your smartphone.  
In the Bluetooth menu, click on the "i" next to  
the relevant vehicle and deactivate CarPlay.  
Connect the smartphone to the system  
using the USB socket compatible with  
Mirror Screen.  
Apple®CarPlay® is automatically launched a few  
seconds after the USB connection has been  
established. In some cases, it may be necessary  
to unlock your device.  
The smartphone charges when connected by the  
USB cable.  
The cable connection allows you to avoid  
disconnections, especially when passing through  
toll booths.  
In the list, select the "Connectivity".  
Select "My Devices" to display the device  
to be connected to Apple®CarPlay®.  
If the device has already been connected to the  
system via Bluetooth®, select the device settings  
from the list of known devices and choose  
Apple®CarPlay® as the wireless connection  
mode.  
If the device has never been connected to the  
system before, it will have to be paired (refer to  
the "Bluetooth® connection" section).  
The system detects if the smartphone is  
compatible with Apple®CarPlay® and offers to  
connect to it following the pairing process.  
Subsequent automatic connection of the  
smartphone requires activation of the Bluetooth®  
on your device.  
Press this button.  
Press "DELETE".  
Confirm by pressing “YES”.  
Some devices that have just been  
deleted from the system request a  
connection, refuse this request.  
Mirror Screen®  
When a smartphone is connected using  
Mirror Screen®, the vehicle's location and  
some vehicle data is sent to the smartphone  
(e.g. brand, left-hand or right-hand drive, day/  
night mode, physical speed).  
As soon as the connection is established,  
press this button to display the  
Only one USB socket enables the Mirror  
Screen® connection (Apple®CarPlay®);  
refer to the "Ease of use and comfort  
- Fittings" section.  
It is recommended that you use the device's  
original USB cables, preferably with a short  
cable to ensure optimum performance.  
Apple®CarPlay® smartphone  
connection  
"Apple®CarPlay®" interface.  
To initiate the smartphone voice  
commands, press and hold the steering-  
mounted control button.  
Connecting just one Apple®CarPlay® smartphone  
can be carried out either by USB cable or using  
a wireless connection.  
220  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
smartphone has to be followed for the first  
connection, with the vehicle stationary.  
The smartphone charges when connected by the  
USB cable.  
The cable connection allows you to avoid  
disconnections, especially when passing through  
toll booths.  
If the device has already been connected to the  
system via Bluetooth®, select the device settings  
from the list of known devices and choose  
Android Auto as the wireless connection mode.  
The subsequent automatic connection of the  
smartphone requires activation of Bluetooth® on  
your device.  
As soon as the connection is established,  
press this button to display the "Android  
Auto" interface.  
Android Auto smartphone  
connection  
Connecting just one Android Auto smartphone  
can be carried out either by USB cable or using  
a wireless connection.  
11  
First install the "Android Auto"  
application via "Play Store" on your  
smartphone.  
The "Android Auto" function requires a  
compatible smartphone.  
If the device fails to connect, refer to the  
Android Auto website to check that the device  
is compatible with this function.  
Only one USB socket enables the Mirror  
Screen® connection (Android Auto); refer  
to the "Ease of use and comfort - Fittings"  
section.  
It is recommended that you use the device's  
original USB cables, preferably with a short  
cable to ensure optimum performance.  
To initiate the smartphone voice  
commands, press and hold the steering-  
mounted control button.  
If the problem persists, delete all saved  
connections on the smartphone and on the  
system before attempting a new connection.  
To ensure an optimum wireless connection,  
we recommend avoiding placing your  
smartphone too close to other Wi-Fi networks  
to which it can connect automatically.  
Media  
The wireless connection of an Android Auto  
smartphone can be initiated from the "My  
Devices" menu.  
First activate the smartphone’s Android Auto®  
wireless function, in the Settings menu of the  
"Android Auto" application of your smartphone.  
Press the "Settings" application.  
Changing source  
Press the "Media" application.  
Press this button to change source (radio,  
audio streaming via a USB socket,  
Bluetooth® or Mirror Screen®).  
The cable connection requires that you  
deactivate the Android Auto wireless function,  
in the Settings menu of the "Android Auto"  
application of your smartphone.  
Connect the smartphone to the system  
using the USB socket compatible with  
Mirror Screen®.  
Using the steering-mounted controls,  
press this button to change source.  
In the list, select the "Connectivity" tab.  
Select "My Devices" to display the device  
to be connected to Android Auto.  
If the device has never been connected to the  
system before, it will have to be paired (refer to  
the "Bluetooth® connection" section).  
Selecting a radio station  
Press the "Media" application.  
Android Auto is automatically launched a few  
seconds after the USB connection has been  
established. A validation procedure on the  
In the list, select the "Player" tab.  
Press one of the buttons to  
perform an automatic search for  
radio stations.  
The system detects if the smartphone is  
compatible with Android Auto and offers to  
connect to it following the pairing process.  
221  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
Or  
Storing takes place via a short or long  
press on one of these buttons, or a long  
Press this button to change the waveband  
(FM - AM - DAB) according to the country  
Move the slider to manually search for  
frequencies up or down.  
press on an existing favourite radio station,  
which will be replaced.  
of sale.  
Or  
Activating traffic  
announcements  
Press this button.  
Press this button to return to the previous  
page.  
Enter the frequency values using the  
virtual keypad.  
Press this button to confirm.  
This function gives priority to listening to Traffic  
announcements alert messages. To be active,  
this function needs good reception of a radio  
station that transmits this type of message.  
While traffic information is being broadcast, the  
current radio station is automatically interrupted  
so that the message can be heard. Normal radio  
listening resumes as soon as the message is  
finished.  
Automatic search for radio  
stations  
Via the "Media" application.  
Press the "Media" application.  
A list of stations is available by pressing the  
“Stations” tab.  
Press “Mute” to activate/deactivate the  
sound.  
In the list, select the "Stations" tab.  
The search is carried out automatically.  
Radio reception may be affected by the  
use of electrical equipment not approved  
by the Brand, such as a charger with USB  
socket connected to the 12 V socket.  
The exterior environment (hills, buildings,  
tunnels, basement car parks, etc.) may block  
reception, including in RDS mode. This  
phenomenon is normal in the propagation  
of radio waves and does not indicate any  
malfunction of the system.  
Activating radio station  
tracking  
The system changes frequency automatically to  
obtain better reception.  
Press the "Media" application.  
In the list, select the "Settings” tab.  
Activate “Traffic Announcement (TA)”.  
Press the "Media" application.  
The lighting of the slider confirms that the  
function is activated.  
In the list, select the "Settings” tab.  
Activate “Radio Station Tracking”.  
Audio streaming  
The streaming function allows you to listen to  
the audio stream coming from the smartphone(s)  
connected via Bluetooth®, USB (iPod® type) or  
Mirror Screen®.  
First adjust the volume on the portable device (to  
a high level).  
The lighting of the slider confirms that the  
function is activated.  
Storing a radio station  
Select a station.  
Changing the waveband  
Press the "Media" application.  
Press the "Media" application.  
In the list, select the "Player” tab.  
Press the "Radio Favorites" button.  
Then adjust the volume of the system.  
In the list, select the "Player" tab.  
222  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
If playback does not start, it may be necessary to  
start the audio playback from the smartphone.  
Control is from the portable device or by using  
the system's touch buttons.  
Press the "Media" application.  
We recommend using the original USB  
cable for the portable device.  
11  
In the list, select the "Settings" tab.  
Or  
Via the Settings application  
Press the "Settings" application.  
Phone  
Once connected in streaming mode, the  
smartphone is considered to be a media  
source.  
Receiving a call  
An incoming call is announced by a ring and a  
display overlaid on the screen.  
Accepting the call:  
briefly press the telephone button on the  
steering-mounted controls to accept an  
incoming call.  
In the list, select the "Audio and Radio" tab.  
It is possible to configure:  
– Sound Settings.  
– Radio Settings.  
– Volume Settings.  
Playing a track  
Press the "Media" application.  
If several devices are connected, press  
this button to select one.  
Once the device is connected, browsing through  
the files is possible by pressing the "Playlist" or  
"Library" button.  
Information and advice  
The system supports USB Mass Storage devices  
or Apple® devices via the USB sockets. The  
adapter cable is not supplied.  
Devices are managed using the audio system  
controls.  
Or  
Press this touch screen button.  
Ending the call:  
press and hold...  
Short press: go to the previous/  
next track.  
The system will only play audio files with ".wma,  
.aac, .flac, .ogg, .mp3" file extensions, at bit rates  
between 32 Kbps and 320 Kbps.  
Long press: fast-forward/rewind in a track.  
Repeat the current title or the list of  
selected titles.  
...the telephone button on the steering-  
mounted controls to refuse the call.  
Or  
It also supports VBR (Variable Bit Rate) mode.  
No other file types (".mp4", etc.) can be read.  
".wma" files must be of the WMA 9 standard.  
The supported sampling rates are 32, 44 and  
48 KHz.  
To avoid reading and display problems, we  
recommend choosing file names less than 20  
characters long that do not contain any special  
characters (e.g. “ ? . ; ù).  
Random track playback.  
Press this touch screen button.  
Sound deactivation/reactivation.  
Press this button on the touch screen to  
send an automatic message indicating  
that you are driving.  
Configuring audio and radio  
settings  
Audio settings can be accessed in 2 different  
ways.  
Making a call  
Using the telephone is strongly  
discouraged while driving.  
Park the vehicle.  
Use only USB memory sticks in FAT32 format  
(File Allocation Table).  
Via the Media application  
223  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
Making a call using the numeric  
keypad  
It is possible to configure:  
Organising the contact list  
– the screen colours associated with the interior  
ambient lighting. Refer to the "Ease of use and  
comfort" section.  
– the sound ambience.  
– the visual welcome and goodbye animations.  
– the screen transition animations.  
Press the "Phone" application.  
Press the "Phone" application.  
In the list, select the “Settings” tab to display the  
telephone-related settings.  
In the list, select the “Keypad” tab then dial the  
number.  
Choose to list the contacts starting with  
their first or last name.  
Press this button to make the call.  
Managing the system  
Connecting two phones  
Making a call using the list of recent  
calls  
connectivity  
The system allows two phones to be  
connected simultaneously:  
– 2 via Bluetooth® connection.  
or  
– 1 via Bluetooth® connection and 1 via Mirror  
Screen® connection.  
Press the "Settings" application.  
Press the "Phone" application.  
In the list, select the "Connectivity" tab.  
It is possible to manage:  
– The Bluetooth® connection.  
– The Mirror Screen® smartphone connections  
(Apple®CarPlay®/Android Auto).  
– The Wi-Fi connection.  
In the list, select the "Calls" tab.  
Or  
Briefly press...  
Display and content priority is given to the last  
phone used.  
...the telephone button on the steering-  
mounted controls.  
Select and call one of the most recent numbers  
called in the list.  
– The privacy mode.  
To change the priority of the phone:  
Press the "Phone" application.  
Configuring the system  
It is always possible to make a call  
directly from the telephone; as a safety  
measure, first park the vehicle.  
Press the "Settings" application.  
Press this button to change the priority of  
the phone.  
In the list, select the "System” tab.  
It is possible to configure:  
– the language.  
Settings  
Calling a contact  
Press the "Phone" application.  
– the date & time.  
Configuring the screen  
– the unit of distance and consumption  
(kWh/100 miles - miles, mi/kWh - miles, km/kWh  
- km).  
In the list, select the "Contacts” tab.  
Select the desired contact in the displayed list.  
Call the contact by selecting one of the  
contact's phone numbers.  
display  
Press the "Settings" application.  
– the temperature unit (Fahrenheit, Celsius).  
In the list, select the "Customization" tab.  
224  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
It is also possible to reset the system  
configuration.  
The system does not automatically  
change between winter and summer time  
(depending on the country of sale).  
Access to sections dedicated to the various  
audio equipment and telematics systems.  
Contents  
Access to subjects via the main sections  
of the handbook.  
11  
Selecting the language  
Select "Language" to change the  
language.  
Press the desired language.  
Help  
Visual search  
Press the "Help" application.  
Press Visual search.  
Press the back arrow to return to the  
previous page.  
In the list, select the “User Manual” tab to  
consult the vehicle’s handbook.  
or  
In the list, select the “Tutorials” tab to watch  
explanatory videos for a quick start on screen  
management, certain driving aids and voice  
recognition.  
Press one of the pictures located at the bottom  
of the screen.  
Press one of the bullet points in the  
enlarged view.  
There are two cases:  
– Direct display of the subject, if only one  
subject is associated with the bullet point.  
– Display of a list of subjects, if several subjects  
are associated with the bullet point.  
Setting the date and time  
Select “Date and Time” to modify the date and  
time.  
“Automatic Date and Time” is activated  
by default, so that the setting is made  
automatically according to your geolocation.  
To adjust manually, deactivate “Automatic Date  
and Time”.  
User Manual  
Select the display language.  
Indicator lamps  
Press the “Select Time Zone” field then define  
a time zone.  
Press the back arrow to return to the  
previous page.  
Press the “Time Settings” line then set the time.  
Press "OK" to confirm.  
The handbook home page is displayed.  
It presents the different possibilities for accessing  
the information sought:  
Press Indicator lamps.  
The mosaic of warning/indicator lamps is  
displayed.  
The warning/indicator lamps are sorted by  
colour.  
Press the warning/indicator lamp concerned; the  
corresponding content is displayed.  
Back to the mosaic of warning/indicator  
lamps.  
Visual search  
Access to subjects via pictures  
representing the exterior and interior of the  
vehicle.  
Press the “Date” line then set the date.  
Press "OK" to confirm.  
Indicator lamps  
Access to the descriptions/operation of  
the instrument panel warning/indicator lamps.  
System  
Select the Time Format (12h/24h).  
Select the Date Format.  
225  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
System  
Press System.  
The list of audio and telematics systems is  
displayed.  
Press on the section concerned; the list of  
subjects is displayed.  
Press on the subject concerned;  
the corresponding content is displayed.  
If the subject has more than one page,  
drag horizontally.  
Back to the list of subjects.  
Contents  
Press Contents.  
The list of sections is displayed.  
Press on the section concerned; the list of  
subjects is displayed.  
Press on the subject concerned;  
the corresponding content is displayed.  
If the subject has more than one page,  
drag horizontally.  
Back to the list of subjects.  
226  
CarManuals2.com  

Related Topics

First steps
Personalisation
Applications
Navigation
Connectivity
Mirror Screen
Media
Phone