2024-2025 Peugeot 3008 SUV Touch screen 10 inch and Bluetooth Radio and Telephone User Manual

MY CAR USER MANUAL

Touch screen 10 inch and Bluetooth Radio and Telephone for Your Peugeot 3008 SUV Third Generation (2024-2025)

Touch screen 10" & Bluetooth Radio & Telephone  
(short-circuit) that could lead to death  
(electrocution)!  
In the event of a problem, always contact a  
PEUGEOT dealer or a qualified workshop.  
With the ignition off, a press turns the system on.  
Increase or decrease the volume using  
the wheel or the "plus" or "minus" buttons  
(depending on the equipment).  
Use the buttons on either side of or below the  
touch screen to access the menus, then press  
the virtual buttons on the touch screen.  
Depending on the model, use the "HOME" and  
"Vehicle" buttons below the touch screen to  
access the menus, then press the virtual buttons  
on the touch screen.  
Touch screen 10" &  
Bluetooth Radio &  
Telephone  
10  
The system is protected so that it only  
operates in the vehicle.  
The message Energy economy mode is  
displayed when the system is about to go into  
standby.  
Multimedia audio system -  
Applications - Bluetooth®  
telephone  
The functions and settings described  
vary according to the vehicle version and  
configuration, as well as the country of sale.  
At all times it is possible to display the rolling  
menus by pressing the screen briefly with three  
fingers.  
The system’s Open Source Software  
(OSS) source codes are available at the  
following addresses:  
On pages with multiple tabs at the bottom of the  
screen, you can switch between pages either  
by tapping the tab for the desired page or by  
swiping the pages to the left or right with your  
finger.  
For safety reasons and because they  
require sustained attention by the driver,  
the following operations must be carried out  
with the vehicle stationary and the ignition  
on:  
– Connecting the smartphone via Bluetooth,  
USB or Wi-Fi.  
– Using the smartphone.  
– Connecting to the CarPlay® or Android  
Auto applications (certain applications stop  
displaying when the vehicle is moving).  
– Changing the system settings and  
configuration.  
https://www.groupe-psa.com/fr/oss/  
https://www.groupe-psa.com/en/oss/  
The system transmits and/or receives  
radio waves subject to the Directive  
2014/53/EU.  
The manufacturers of the mentioned system  
declare the conformity with the Directive  
2014/53/EU.  
The full text of the EU declaration of  
conformity for each system is available at the  
following address:  
Press the back arrow to go back a level or  
confirm.  
The touch screen is of the "capacitive"  
type.  
To clean the screen, use a soft, non-abrasive  
cloth (e.g. spectacles cloth) with no additional  
product.  
Do not use sharp objects on the screen.  
Do not touch the screen with wet hands.  
http://public.servicebox.peugeot.com/APddb/  
Any intervention or modification on the  
vehicle's system is strictly forbidden  
- Risk of serious burns or electric shock  
Certain information is displayed permanently on  
the main screen:  
First steps  
With the engine running, a press mutes  
the sound.  
197  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
– Air conditioning status information (depending  
on version), and direct access to the  
corresponding menu.  
– Radio Media and Telephone menu status  
information.  
– Privacy status information.  
– Access to the touch screen and digital  
instrument panel settings.  
Decrease volume.  
Mute by pressing the volume increase  
and decrease buttons simultaneously  
(depending on equipment).  
Restore the sound by pressing one of the two  
volume buttons.  
Menus  
Vol-  
Radio Media  
Telephone (short press): start telephone  
call.  
Audio source selection (depending on  
equipment):  
Call in progress (short press): access  
telephone menu.  
– FM/DAB/AM radio stations (depending on  
equipment).  
– Telephone connected via Bluetooth and  
Bluetooth multimedia broadcast (streaming).  
– USB Memory stick.  
Telephone (long press): reject an incoming call,  
end call; when no call is in progress, access  
telephone menu.  
Radio (rotate): automatic search for the  
previous/next station.  
Select an audio source or radio station.  
Media (rotate): previous/next track, move  
through a list.  
In very hot conditions, the volume may  
be limited to protect the system. It may  
enter standby mode (with the screen and  
sound off) for 5 minutes or more.  
The system will resume normal operation  
when the temperature in the passenger  
compartment has dropped.  
Short press: confirm a selection; if nothing  
selected, access presets.  
Accelerated navigation.  
Telephone  
The system is operational in temperatures  
between -40°C and +70°C.  
Steering mounted controls  
Voice control: smartphone voice  
commands.  
Connect a mobile phone via Bluetooth®.  
Run certain applications from a  
smartphone connected via CarPlay® or Android  
Auto.  
Increase volume.  
Vol+  
198  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
Applications  
Driving  
Air conditioning  
10  
Manage various temperature and air flow  
settings.  
Activate, deactivate or configure certain  
vehicle functions.  
Access configurable equipment.  
Navigation  
Settings  
Radio  
Selecting a station  
Press Radio Media to display the main  
page.  
Press one of the buttons to perform an  
automatic search for radio stations.  
Or  
Move the slider to manually search for  
frequencies up or down.  
Or  
Press the frequency to enter the FM and  
AM waveband values using the virtual  
keypad.  
Configure the navigation and select your  
destination via CarPlay® or Android Auto.  
Configure the sound (balance, ambience,  
etc.), the display (language, units, date,  
time, etc.), and some system functions.  
Press "OK" to confirm.  
199  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
Radio reception may be affected by the  
use of electrical equipment not approved  
by the Brand, such as a USB charger  
connected to the 12 V socket.  
The exterior environment (hills, buildings,  
tunnels, basement car parks, etc.) may  
block reception, including in RDS mode.  
This phenomenon is perfectly normal in the  
context of radio wave transmission, and  
in no way indicative of an audio system  
malfunction.  
Activating/Deactivating RDS Playing TA messages  
RDS, if activated, allows you to continue  
listening to the same station by automatically  
retuning to alternative frequencies.  
Press Radio Media to display the main  
page.  
The TA (Traffic Announcement) function gives  
priority to TA alert messages. To operate, this  
function needs good reception of a radio station  
that transmits this type of message. While traffic  
information is being broadcast, the current  
media is automatically interrupted so that the  
TA message can be heard. Normal play of the  
previously playing media resumes at the end of  
the message.  
Press the "OPTIONS" button to access the  
secondary page.  
Activate/deactivate "RDS".  
Press in the shaded area to confirm.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
Changing the waveband  
RDS station tracking may not be  
available nationwide, as many radio  
stations do not cover 100 % of the country.  
This explains the loss of reception of the  
station during a journey.  
Press Radio Media to display the main  
page.  
Activate/deactivate "TA".  
Press the "OPTIONS" button to access the  
secondary page.  
Press in the shaded area to confirm.  
Press "Band" to change waveband.  
Audio settings  
Displaying text information  
Press in the shaded area to confirm.  
Press Radio Media to display the main  
page.  
The "Radio Text" function displays information  
transmitted by the radio station relating to the  
station or the currently playing song.  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to access the  
secondary page.  
Presetting a station  
Select a radio station or frequency.  
Make a short press on the star outline. If  
the star is solid, the radio station is  
already preset.  
Press "Audio settings".  
Press the "OPTIONS" button to access the  
secondary page.  
Select the "Tone", "Balance" or "Sound"  
tab to configure the sound settings.  
Press the back arrow to confirm.  
Activate/deactivate "News".  
Or  
Select a radio station or frequency.  
Press "Preset".  
Press in the shaded area to confirm.  
Make a long press on one of the buttons  
to preset the station.  
In the "Tone" tab, the Ambience, Bass,  
Medium and Treble sound settings are  
200  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
different and independent for each audio  
source.  
In the "Balance” tab, the All passengers,  
Driver and Front only settings are common  
to all sources.  
Press the "OPTIONS" button to access the  
secondary page.  
If the "DAB" station being listened to is  
not available on "FM", or if "FM-DAB  
Follow-up" is not activated, the sound will cut  
out when the digital signal becomes too weak.  
10  
Press "Band" to select "DAB band".  
Press in the shaded area to confirm.  
In the "Sound” tab, activate or deactivate  
"Volume linked to speed", "Auxiliary input"  
and "Touch tones".  
Media  
FM-DAB Follow-up  
"DAB" does not cover 100% of the territory.  
When the digital radio signal is poor, the  
"FM-DAB Follow-up" enables you to continue  
listening to the same station by automatically  
switching to the corresponding "FM" analogue  
station (if there is one).  
Press Radio Media to display the main  
page.  
Press the "OPTIONS" button to go to the  
secondary page.  
USB port  
The balance/distribution (or spatialisation  
with the Arkamys© system) uses audio  
processing to adjust the sound quality  
according to the number of passengers in the  
vehicle.  
Insert the USB memory stick into the USB  
port or connect the USB device to the  
USB port using a suitable cable (not supplied).  
To protect the system, do not use a USB  
hub.  
Onboard audio: Arkamys Sound Staging©  
optimises the sound distribution inside  
the passenger compartment.  
The system builds playlists (in temporary  
memory); this operation can take from a  
few seconds to several minutes at the first  
connection.  
Activate/deactivate "FM-DAB Follow-up".  
Reduce the number of non-music files and the  
number of folders to reduce the waiting time.  
Playlists are updated whenever the ignition  
is switched off or a USB memory stick is  
connected. The audio system memorises these  
lists, which will subsequently load faster if they  
have not been changed.  
Press in the shaded area to confirm.  
DAB (Digital Audio  
Broadcasting) radio  
If "FM-DAB Follow-up" is activated, there  
may be a time offset of a few seconds  
Terrestrial Digital Radio  
when the system switches to "FM" analogue  
radio, and in some cases a change in volume.  
When the digital signal quality is restored, the  
system automatically changes back to "DAB".  
To minimise this time lag, storing radio  
Digital radio provides higher quality sound.  
The various "multiplexes/ensembles" offer a  
choice of radio stations organised in alphabetical  
order.  
Selecting the source  
Press Radio Media to display the main  
page.  
Press Radio Media to display the main  
page.  
stations in the "DAB" band is recommended.  
Press the "SOURCES" button.  
Select the source.  
201  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
BluetoothStreaming®  
confirm to go down through the menu to the  
desired track.  
Use only USB memory sticks in FAT32 format  
(File Allocation Table).  
Streaming allows you to listen to the audio feed  
from your smartphone.  
We recommend using the original USB  
cable for the portable device.  
The version of software in the audio system may  
not be compatible with the generation of the  
Apple® player.  
The Bluetooth profile must be activated.  
First adjust the volume on the portable device  
(to a high level). Then adjust the volume of the  
system.  
If play does not start automatically, it may be  
necessary to start the audio playback from the  
smartphone.  
Information and advice  
Telephone  
The system supports USB mass storage  
devices, BlackBerry® devices or Apple® players  
via the USB ports. The adapter cable is not  
supplied.  
Pairing a Bluetooth®  
telephone  
Control is from the portable device or by using  
the system's touch buttons.  
Devices are managed using the audio system  
controls.  
Other devices, not recognised on connection,  
must be connected via Bluetooth streaming, if  
compatible.  
The services available depend on the  
network, the SIM card and the  
compatibility of the Bluetooth devices used.  
Consult the telephone user guide and the  
service provider to check which services are  
available.  
Once connected in Streaming mode, the  
smartphone is considered to be a media  
source.  
Connecting Apple® players  
To protect the system, do not use a USB  
hub.  
Connect the Apple® player to the USB socket  
using a suitable cable (not supplied).  
Play starts automatically.  
The Bluetooth function must be activated and  
the telephone configured as "Visible to all” (in the  
telephone settings).  
To complete the pairing, whichever procedure is  
used (from the telephone or from the system),  
ensure that the code is the same in the system  
and in the telephone.  
The audio system will only play audio files with  
".wav", ".wma", ".aac", ".ogg" and ".mp3" file  
extensions, at bit rates between 32 Kbps and  
320 Kbps.  
It also supports VBR (Variable Bit Rate) mode.  
No other file types (".mp4", etc.) can be read.  
All ".wma" files must be standard WMA 9 files.  
The supported sampling rates are 11, 22, 44 and  
48 KHz.  
To avoid reading and display problems, we  
recommend choosing file names less than 20  
characters long that do not contain any special  
characters (e.g. “ ? . ; ù).  
Control is via the audio system.  
The classifications available are those of  
the portable device connected (artists/  
albums/genres/playlists/audio books/  
podcasts). It is also possible to use a  
classification structured in the form of a  
library.  
The default classification used is by artist. To  
modify the classification used, return to the  
first level of the menu then select the desired  
classification (playlists for example) and  
If the pairing procedure fails, we  
recommend deactivating and then  
reactivating the Bluetooth function on the  
telephone.  
202  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
Procedure from the telephone  
The ability of the system to connect just  
one profile depends on the telephone.  
All three profiles may connect by default.  
Managing paired telephones  
This function lets you connect or disconnect a  
device or delete a pairing.  
Press Telephone to display the main  
page.  
Press the "PHONE" button to access the  
secondary page.  
10  
Select the name of the system in the list  
of detected devices.  
In the system, accept the connection request  
from the telephone.  
The profiles compatible with the system  
are: HFP, OPP, PBAP, A2DP, AVRCP,  
MAP and PAN.  
Procedure from the system  
Press Telephone to display the main  
page.  
Press "Connected Devices".  
The list of detected telephones is  
displayed.  
Press "Bluetooth connection" to  
display the list of paired devices.  
Press on the name of the telephone  
selected in the list to disconnect it.  
Press again to connect it.  
Visit the Brand's website for more information  
(compatibility, additional help, etc.).  
Automatic reconnection  
On returning to the vehicle, if the last telephone  
connected is present again, it is automatically  
recognised and within about 30 seconds  
after switching on the ignition, the pairing is  
established automatically (Bluetooth activated).  
To modify the connection profile:  
Press Telephone to display the main  
page.  
Press this button to start searching for  
new devices.  
Select the name of the chosen telephone  
in the list.  
Deleting a telephone  
Press the basket at the top right of the  
screen to display a basket alongside the  
telephone chosen.  
Complete the pairing with the displayed code.  
Press the basket alongside the telephone  
chosen to delete it.  
Connection sharing  
The system offers to connect the telephone with  
3 profiles:  
– "Telephone" (hands-free kit, telephone only),  
– “Streaming" (streaming: wireless playing of  
audio files on the telephone),  
Press the "PHONE" button to access the  
secondary page.  
Receiving a call  
An incoming call is announced by a ring and a  
superimposed display in the screen.  
Make a short press on the steering  
mounted PHONE button to accept an  
incoming call.  
Press "Bluetooth connection" to  
display the list of paired devices.  
Press the "Details" button for a paired  
device.  
– "Mobile internet data".  
Select one or more profiles.  
Select one or more profiles.  
And  
Press "OK" to confirm.  
Make a long press  
Press "OK" to confirm.  
Depending on the type of telephone, you may by  
prompted to accept the transfer of contacts and  
messages.  
on the steering mounted PHONE button  
to reject the call.  
Or  
203  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
Press "End call".  
technology on the vehicle’s screen. For CarPlay®  
technology, the CarPlay® function must first be  
activated on the smartphone.  
The smartphone can be connected via USB  
cable or via a wireless connection.  
Calling a recently used  
number  
Press Telephone to display the main  
Making a call  
page.  
Or  
Using the telephone is not recommended  
while driving.  
Unlock the smartphone for the  
Press and hold  
communication process between the  
smartphone and the system to work.  
As principles and standards are constantly  
changing, we recommend keeping the  
smartphone's operating system up-to-  
date, together with the date and time on  
the smartphone and the system.  
Parking the vehicle.  
Make the call using the steering mounted  
controls.  
the steering mounted button.  
Press "Recent calls".  
Select the desired contact from the displayed list.  
Calling a new number  
Press Telephone to display the main  
page.  
Enter the phone number using the digital  
keypad.  
It is always possible to make a call  
directly from the telephone; as a safety  
measure, first park the vehicle.  
For the list of compatible smartphones,  
visit the Manufacturer's website in your  
country.  
Press "Call" to start the call.  
Setting the ringtone  
Press Telephone to display the main  
page.  
USB sockets  
Calling a contact  
Depending on equipment, for more information  
on the USB sockets compatible with CarPlay® or  
Android Auto applications, refer to the "Ease of  
use and comfort" section.  
Press the "OPTIONS" button to access the  
secondary page.  
Press Telephone to display the main  
page.  
Press "Ring volume" to display the  
volume bar.  
Or press and hold  
Press the arrows or move the slider to set  
the ring volume.  
Wireless connection  
the steering mounted PHONE button.  
Before using CarPlay® or Android Auto  
wirelessly, ensure the Wi-Fi regulatory  
restrictions of your geographic location are  
Press "Contacts".  
Select the desired contact from the displayed list.  
Press "Call".  
Using CarPlay® or Android  
Auto  
Synchronising a smartphone enables users  
to display applications that support the  
smartphone’s CarPlay® or Android Auto  
204  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
met, as indicated by a message on the touch  
screen.  
If the 5 GHz Wi-Fi network frequency is not  
allowed in your location, select 2.4 GHz at the  
first connection.  
Check the Wi-Fi restrictions again when you  
travel to different locations and set the Wi-Fi  
frequency accordingly.  
The regulations of the 5 GHz frequency  
are specific to each country. Refer to the  
regulation in force in your country.  
The CarPlay® navigation can be accessed  
at any time by pressing the system's  
Navigation button.  
CarPlay® smartphone  
connection  
10  
The availability of the application depends on the  
country.  
Wireless connection  
First activate the smartphone’s Bluetooth®  
function.  
USB connection  
From the system, press "Telephone" to  
display the main page.  
On connecting the USB cable, the  
CarPlay® function deactivates the  
system's Bluetooth® mode.  
The "CarPlay" function requires the use of  
a compatible smartphone and compatible  
applications.  
If the device has already been connected to the  
system via Bluetooth®, select the device settings  
from the list of known devices and choose  
CarPlay® as the wireless connection mode.  
If the device has never been connected to the  
system before, it will have to be paired (refer to  
the corresponding section).  
The system detects if the smartphone is  
compatible with CarPlay® and offers to connect  
to it following the pairing process.  
Subsequent automatic connection of the  
smartphone requires activation of the Bluetooth®  
on your device.  
As soon as the connection is established,  
press "CarPlay" to display the CarPlay®  
interface.  
Press and hold this steering-mounted  
control button and say "Siri" to initiate the  
smartphone voice commands.  
When using CarPlay® with 5 GHz  
frequency activated, there may be  
interference with certain devices (tolls,  
parking...) resulting in a disconnection. To  
prevent this from happening, it is  
Connect the USB cable.  
The smartphone charges when connected by the  
USB cable.  
recommended to disable the 5 GHz function.  
From the system, press "Telephone" to  
display the main page.  
Press "CarPlay" to display the CarPlay®  
interface.  
Difficulties in connecting wirelessly your  
smartphone may happen, due to:  
– Interference with other Wi-Fi networks.  
– Interference with certain devices (tolls,  
parking) when using Android Auto.  
– An unsuitable configuration of the  
smartphone.  
CarPlay® interface may appear  
automatically.  
When the USB cable is disconnected  
and the ignition is switched off then back  
on, the system will not automatically switch to  
Radio Media mode; the source must be  
changed manually.  
In these cases, it is recommended to connect  
the smartphone with its original cable.  
Android Auto smartphone  
connection  
The availability of the application depends on the  
country.  
205  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
On the smartphone, download the  
Android Auto application.  
Wireless connection  
First activate the smartphone’s Bluetooth®  
There may be a pause before  
applications become available,  
depending on the quality of the network.  
function.  
The "Android Auto" function requires the  
use of a compatible smartphone and  
applications.  
Connect a USB cable.  
From the system, press "Telephone" to  
display the main page.  
Applications  
The first connection of Android Auto to  
the system should be made by USB  
cable.  
If the device has already been connected to the  
system via Bluetooth®, select the device settings  
from the list of known devices and choose  
Android Auto® as the wireless connection mode.  
If the device has never been connected to the  
system before, it will have to be paired (refer to  
the corresponding section).  
The system detects if the smartphone is  
compatible with Android Auto and offers to  
connect to it following the pairing process.  
Subsequent automatic connection of the  
smartphone requires activation of the Bluetooth®  
on your device.  
Viewing photos  
Insert a USB memory stick in the USB port.  
To protect the system, do not use a USB  
hub.  
USB connection  
Connect a USB cable.  
The system can read folders and image files in  
the formats: .tiff; .gif; .jpg/jpeg; .bmp and .png.  
Press Applications to display the main  
page.  
The smartphone charges when connected by a  
USB cable.  
From the system, press "Telephone" to  
display the main page.  
Press "Android Auto" to start the  
application in the system.  
Press "Photos".  
Select a folder.  
As soon as the connection is established,  
press "Android Auto" to display the  
Android Auto interface.  
Press and hold this steering-mounted  
control button and say "OK Google" to  
initiate the smartphone voice commands.  
Access to the different audio sources remains  
available in the margin of the Android Auto  
display, using the touch buttons located in the  
upper bar.  
Depending on the smartphone, it may be  
necessary to activate the "Android Auto"  
function.  
During the procedure, several screen  
pages relating to certain features are  
displayed.  
Accept to start and complete the connection.  
When connecting a smartphone to the  
system, we recommend enabling  
Bluetooth® on the smartphone.  
Select an image to view.  
Press this button to display the details of  
the photo.  
Press the back arrow to go back a level.  
Managing messages  
Press Applications to display the main  
page.  
Press "SMS".  
Access to the menus for the system is possible  
at any time using the dedicated buttons.  
206  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
Select the "SMS” tab.  
Move the slider to adjust the brightness of  
the screen and/or the instrument panel  
(depending on version).  
– "Only data sharing”  
– "Data and vehicle position sharing"  
Press the back arrow to confirm.  
10  
Press this button to select the display  
settings for messages.  
Press in the shaded area to confirm.  
Press this button to search and select a  
recipient.  
Press Settings to display the main page.  
Modifying system settings  
Select the "Quick messages” tab.  
Press "Configuration" to access the  
secondary page.  
Press Settings to display the main page.  
Press this button to select the display  
settings for messages.  
Press this button to write a new message.  
Press "Screen configuration".  
Press "Configuration" to access the  
secondary page.  
Press "Brightness".  
Move the slider to adjust the brightness of  
the screen and/or the instrument panel  
(depending on version).  
Press "System configuration".  
Press the bin alongside the selected  
message to delete it.  
Press this button alongside the selected  
message to display the secondary page.  
Press this button to edit and modify the  
existing text.  
Press the "Units" tab to change the units of  
distance, fuel consumption and temperature.  
Press the "Factory settings" tab to restore the  
initial settings.  
Press the back arrow to confirm.  
Press "Animation".  
Activate or deactivate: “Automatic  
scrolling”.  
Select "Animated transitions".  
Returning the system to factory settings  
activates the English language by default  
(depending on version).  
Press this button to write a new message.  
Press the bin to delete the message.  
Press the back arrow to confirm.  
Press the "System info" tab to display the  
versions of the various modules installed in the  
system.  
Press the "Privacy" tab,  
or  
Settings  
Selecting the language  
Press Settings to display the main page.  
Adjusting the brightness  
Press Settings to display the main page.  
Press Settings to display the main page.  
Press "Configuration" to access the  
secondary page.  
Select "Language" to change the  
language.  
Press "Privacy" to activate or deactivate  
the private data mode.  
Activate or deactivate:  
Press Brightness.  
Press the back arrow to confirm.  
– "No sharing (data, vehicle position)".  
207  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
Press "Date and time".  
Select "Date".  
Difficulties in connecting wirelessly your  
smartphone may happen, due to:  
– Interference with other Wi-Fi networks.  
– Interference with certain devices (tolls,  
parking) when using Android Auto.  
– An unsuitable configuration of the  
smartphone.  
Setting the time  
Press Settings to display the main page.  
Press this button to set the date.  
Press "Configuration" to access the  
secondary page.  
Press "Date and time".  
Press the back arrow to save the date.  
Select the display format for the date.  
Press the back arrow again to confirm.  
In these cases, it is recommended to connect  
the smartphone with its original cable.  
Select "Time".  
Press this button to set the time using the  
virtual keypad.  
The regulations of the 5 GHz frequency  
are specific to each country.  
Refer to the regulation in force in your  
country.  
Press "OK" to save the time.  
Time and date setting is only available if  
"GPS Synchronisation:" is deactivated.  
Press this button to set the time zone.  
Select the display format for the time  
(12h/24h).  
Activate or deactivate summer time (+1  
hour).  
Wifi settings  
Press Settings to display the main page.  
Frequently asked  
questions  
Press "Wifi" to access network frequency  
setting.  
Activate or deactivate the 5 GHz Wifi  
function.  
Press the back arrow to save the settings.  
The following information groups together the  
answers to the most frequently asked questions  
concerning the system.  
The system may not automatically  
manage the change between winter and  
summer time (depending on the country of  
sale).  
Android Auto uses the 5 GHz frequency.  
CarPlay® uses the 2,4 and 5 GHz  
frequency.  
Radio  
The reception quality of the tuned radio  
station gradually deteriorates or the station  
presets are not working (no sound, 87.5 MHz  
is displayed, etc.).  
Setting the date  
When using CarPlay® with 5 GHz  
frequency activated, there may be  
interference with certain devices (tolls,  
parking...) resulting in a disconnection. To  
prevent this from happening, it is  
Press Settings to display the main page.  
The vehicle is too far from the selected station’s  
transmitter, or no transmitter is present in the  
geographical area.  
Press "Configuration" to access the  
secondary page.  
recommended to disable the 5 GHz function.  
208  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
► Activate the "RDS" function in the upper bar  
to enable the system to check whether there is  
a more powerful transmitter in the geographical  
area.  
The environment (hills, buildings, tunnels,  
basement car parks, etc.) is blocking reception,  
including in RDS mode.  
This is a perfectly normal phenomenon, and is  
not indicative of an audio system malfunction.  
The aerial is missing or has been damaged  
(for example while entering a car wash or  
underground car park).  
stick (multiplication by 10 of the cataloguing  
time).  
Android Auto and/or CarPlay do not work.  
Android Auto and CarPlay may not activate if the  
USB cables are of poor quality.  
► Use genuine USB cables to ensure  
compatibility.  
Android Auto and/or CarPlay do not work.  
Android Auto and CarPlay are not available in all  
countries.  
► Check the Google Android Auto or Apple  
website to see which countries are supported.  
The volume of the telephone connected in  
Bluetooth mode is inaudible.  
10  
► Delete the files supplied with the memory  
stick and limit the number of sub-folders in the  
file structure on the memory stick.  
Some characters in information about the  
currently playing media are not displayed  
correctly.  
The audio system is unable to process certain  
types of character.  
► Use standard characters to name tracks and  
folders.  
► Have the aerial checked by a dealer.  
I cannot find some radio stations in the list of  
received stations.  
The name of the radio station changes.  
The station is no longer received or its name has  
changed in the list.  
► Press the round arrow on the "List" tab on the  
"Radio" page.  
Some radio stations send other information  
in place of their name (the title of the song for  
example).  
Playback of streaming files does not start.  
The connected device does not automatically  
launch playback.  
► Start playback from the device.  
Track names and playing times are not  
displayed on the audio streaming screen.  
The Bluetooth profile does not allow the transfer  
of this information.  
The volume depends on both the system and the  
telephone.  
► Increase the volume of the audio system, to  
maximum if required, and increase the volume of  
the telephone if necessary.  
Ambient noise affects the quality of the  
telephone call.  
► Reduce ambient noise (close windows, turn  
down ventilation, slow down, etc.).  
The contacts are not listed in alphabetical  
order.  
Some telephones offer display options.  
Depending on the settings chosen, contacts can  
be transferred in a specific order.  
► Modify the telephone directory display  
settings.  
Telephone  
I cannot connect my Bluetooth telephone.  
The telephone's Bluetooth function may be  
switched off or the device may not be visible.  
► Check that the telephone has Bluetooth  
switched on.  
The system interprets these details as the station  
name.  
► Press the round arrow on the "List" tab on the  
"Radio" page.  
► Check in the telephone settings that it is  
"visible to all".  
The Bluetooth telephone is not compatible with  
the system.  
► Check the compatibility of the telephone on  
the Brand's website (services).  
Media  
Settings  
When the treble and bass settings are  
changed, the ambience is deselected.  
Playback of my USB memory stick starts only  
after a very long wait (around 2 to 3 minutes).  
Some files supplied with the memory stick may  
greatly slow down access to reading the memory  
209  
CarManuals2.com  
Touch screen 10" & Bluetooth Radio & Telephone  
When the ambience is changed, the treble  
and bass settings are reset.  
► Start the vehicle’s engine to increase the  
charge of the battery.  
Selecting an ambience imposes the treble and  
bass settings, and vice versa.  
► Modify the treble and bass or ambience  
settings to obtain the desired musical ambience.  
When the balance settings are changed, the  
distribution is deselected.  
When the distribution setting is changed, the  
balance settings are deselected.  
Selecting a distribution setting imposes the  
balance settings, and vice versa.  
► Modify the balance setting or the distribution  
setting to obtain the desired sound quality.  
There is a difference in sound quality  
between audio sources.  
To allow for optimal listening quality, the sound  
settings can be tailored to different audio  
sources, which can generate audible differences  
when changing source.  
► Check that the sound settings are appropriate  
to the sources listened to. Adjust the sound  
functions to the middle position.  
When the engine is off, the system switches  
off after several minutes of use.  
When the engine is switched off, the system's  
operating time depends on the state of charge of  
the battery.  
The switch-off is normal: the system  
automatically goes into energy economy mode  
and switches off to maintain an adequate charge  
in the battery.  
210  
CarManuals2.com  

Related Topics

First steps
Steering mounted controls
Menus
Radio
Media
Telephone
Applications
Settings