Your comfort -> Automatic climate control for Your Renault Kadjar SUV 2020

AUTOMATIC CLIMATE CONTROL: control A (1/6)  
Automatic mode  
B
C
D
E
F
A
The automatic climate control system  
guarantees comfort in the passen-  
ger compartment and good visibility  
(except in the event of extreme condi-  
tions), while optimising consumption.  
The system controls the ventilation  
speed, air distribution, air recirculation,  
and starting and stopping the air condi-  
tioning and air temperature.  
AUTO: allows the selected com-  
fort level to be best attained, depend-  
ing on the exterior conditions. Press  
button 7. The integrated indicator light  
on button 7 comes on.  
7
1
2
3 4 5  
6
8
9
10 11 12  
9 Air recirculation.  
The controls  
1 Stopping the system or, depending  
on the vehicle, de-icing/demisting  
the windscreen.  
2 and 10 air temperature.  
3 “Clear View” function.  
4 and 5 Passenger compartment air  
distribution.  
6 Fan speed and, depending on the  
ventilation, stopping the system.  
7 Automatic programme.  
8 Air conditioning.  
Varying the ventilation speed  
In automatic mode, the system uses  
the most suitable amount of air to reach  
and maintain the desired comfort level.  
You can still adjust the fan speed by  
pressing the buttons 6 to increase or  
reduce the fan speed.  
In this case, the integrated indicator  
light on button 7 goes out and the ven-  
tilation speed selected is displayed on  
the indicator D.  
11 De-icing/demisting of the rear screen  
and, depending on the vehicle, the  
door mirrors.  
12 DUAL function.  
Indicators  
B Left-hand side air temperature.  
C Distribution of air.  
D Fan speed.  
E Automatic air recirculation warning  
light.  
F Right-hand side air temperature.  
3.7  
AUTOMATIC CLIMATE CONTROL: control A (2/6)  
2
10  
12  
DUAL function setting  
Press button 12 to activate.  
Temperature adjustment  
There are two types of settings:  
The displayed temperature values  
show a comfort level.  
When starting the engine, increas-  
ing or decreasing the value dis-  
played will not allow the com-  
fort level to be reached any more  
quickly. The system will always op-  
timise the temperature increase or  
decrease (the ventilation system  
does not start instantly at maximum  
speed: it gradually increases). This  
may take several minutes.  
Use the control 2 to adjust the left side  
and control 10 for the right side.  
– uniform passenger compartment  
setting;  
– adjustment in DUAL function to inde-  
pendently adjust the left and/or right-  
hand side of the passenger compart-  
ment.  
Uniform passenger compartment  
setting  
Generally speaking, unless there is  
a particular reason not to, the dash-  
board air vents should remain open.  
Use control 2.  
3.8  
AUTOMATIC CLIMATE CONTROL: control A (3/6)  
13  
3
6
11  
7
8
Switching air conditioning on  
or off  
In automatic mode, the system switches  
the air conditioning system on or off,  
depending on the climate conditions.  
Press the switch 8 to force activation  
(the integrated warning light comes on)  
or stop the air conditioning (the inte-  
grated warning light goes out).  
Preferably, use automatic mode.  
In automatic mode (warning light 7  
is on), all climate control functions  
are controlled by the system.  
You can always modify the choice  
of system; in this case, the warning  
light in the button 7 goes out.  
Vehicles fitted with the ECO  
mode (button 13): Once activated,  
the ECO mode may reduce the ef-  
fective performance of the air con-  
ditioning. Please refer to the infor-  
mation on “Eco-driving” in Section 2.  
To return to automatic mode, press  
programme AUTO.  
3.9  
AUTOMATIC CLIMATE CONTROL: control A (4/6)  
Clear View function  
This function quickly demists and de-  
ices the windscreen, the rear screen,  
the front side windows, and the door  
mirrors (depending on the vehicle). The  
air conditioning and rear screen de-ic-  
ing functions must be activated.  
C
Press button 3 – the integrated indica-  
tor light comes on.  
To stop the operation of the rear screen,  
press the de-icer button 11. The inte-  
grated warning light will go out.  
You can change the fan speed: press  
the button 6.  
3 4 5  
6
11  
The air flow is distributed be-  
tween front side window de-  
misting vents, the windscreen demist-  
ing vents and the footwells.  
Adjusting the distribution  
of air in the passenger  
compartment  
To exit this function, press button 3  
again.  
÷
There are five air distribution options.  
Press switches 4 and 5 to scroll through  
them. The arrows located on the indica-  
tor C combine to show you the distribu-  
tion selected:  
The air flow is directed mainly  
towards the footwells.  
ó
G
The air flow is directed to the  
dashboard vents and the foot-  
wells.  
All the air is then directed to  
õ
All the air flow is directed to the  
dashboard vents.  
the windscreen and front side  
J
window demisting vents.  
Some buttons have an operating  
tell-tale which indicates the operat-  
ing status.  
3.10  
AUTOMATIC CLIMATE CONTROL: control A (5/6)  
1
11  
Rear screen de-icing/  
De-icing or demisting the  
windscreen  
(depending on the vehicle)  
demisting  
Press button 11 – the integrated indi-  
cator light comes on. This function en-  
ables rapid demisting or de-icing of the  
rear screen and de-icing of the door  
mirrors (on equipped vehicles).  
With the engine running, press the  
button 1 – the integrated indicator will  
come on.  
This function enables quick electric de-  
icing/demisting.  
To exit this function, press button 11  
again. Demisting automatically stops.  
3.11  
AUTOMATIC CLIMATE CONTROL: control A (6/6)  
Recycling  
This function is managed automati-  
cally (operation is confirmed by warn-  
ing light E), but you can also activate it  
manually.  
E
Note:  
– during recirculation, air is taken from  
the passenger compartment and  
is recycled, with no air being taken  
from outside the vehicle;  
– air recirculation allows the external  
atmosphere to be cut off (when driv-  
ing in polluted areas, etc.);  
7
1
6
9
– lowering the passenger compart-  
ment temperature as quickly as pos-  
sible.  
Manual use  
Stopping the system  
Pressing the button 9 allows air recir-  
culation to be forced. In this case, the  
integrated warning light comes on and  
the indicator E goes out.  
To stop the system, press the button 1  
OFF (the integrated warning light  
comes on) or, depending on the ve-  
hicle, reduce the fan speed down to  
a minimum by pressing the button 6  
marked by OFF as many times as is  
necessary.  
Prolonged use of this position may lead  
to odours, caused by non-renewal of  
air, and the formation of condensation  
on the windows.  
To start, press the switch 7.  
We therefore advise you to return to au-  
tomatic mode as soon as air recircula-  
tion is no longer needed, by pressing  
button 9.  
The demisting/de-icing will still take  
priority over the air recirculation.  
3.12  
AUTOMATIC CLIMATE CONTROL: control B (1/4)  
B
Varying the ventilation speed  
In automatic mode, the system uses  
the most suitable amount of air to reach  
and maintain the desired comfort level.  
1
3
4
5
2
6
You can still adjust the ventilation  
speed by turning control 3 to increase  
or reduce the ventilation speed.  
Adjusting the air temperature  
Turn control 1 to increase or decrease  
the temperature on the left.  
10  
9
8
Automatic mode  
The automatic climate control system  
guarantees comfort in the passen-  
ger compartment and good visibility  
(except in the event of extreme condi-  
tions), while optimising consumption.  
The system controls the ventilation  
speed, air distribution, air recirculation,  
and starting and stopping the air condi-  
tioning and air temperature.  
7
Turn control 6 to increase or decrease  
the temperature on the right.  
Pressing button 7 sets the passenger’s  
temperature to the driver’s tempera-  
ture.  
The controls  
1 Adjusting the driver’s air tempera-  
ture.  
2 “Clear View” function.  
3 Adjusting the ventilation fan speed.  
4 Distribution of air in the passenger  
compartment.  
5 Air conditioning control.  
6 Adjusting the passenger’s air tem-  
perature.  
7 Synchronising the driver’s and front  
passenger’s temperature.  
8 Air recirculation.  
9 De-icing/demisting of the rear screen  
and, depending on the vehicle, the  
rear view mirrors.  
AUTO: allows the selected comfort  
level to be best attained, depending on  
the exterior conditions. Press button 10.  
10Automatic mode.  
3.13  
AUTOMATIC CLIMATE CONTROL: control B (2/4)  
Clear View function  
2
3
4
Press the 2 button: the integrated indi-  
cator light comes on.  
This function quickly demists and de-  
ices the windscreen, the rear screen,  
the front side windows, the door mir-  
rors (depending on the vehicle) and the  
heated windscreen (depending on the  
vehicle). The air conditioning and rear  
screen de-icing functions must be ac-  
tivated.  
Press button 9 to stop the heated rear  
screen operating, and the integrated in-  
dicator goes out.  
9
To exit this function, press button 2 or  
turn control 3.  
The air flow is directed towards  
the dashboard air vents, the  
front footwells and, depending on the  
vehicle, the second row footwells.  
Adjusting the distribution  
of air in the passenger  
compartment  
ö
Press the button 4.  
The air flow is mainly directed  
ô
ó
All the air is then directed to  
the windscreen and front side  
window demisting vents.  
to the dashboard air vents.  
õ
The air flow is directed mainly  
towards the footwells.  
The air flow is distributed be-  
tween front side window de-  
misting vents, the windscreen demist-  
ing vents and the footwells.  
÷
Some buttons have an operating  
tell-tale which indicates the operat-  
ing status.  
3.14  
AUTOMATIC CLIMATE CONTROL: control B (3/4)  
5
11  
9
Rear screen de-icing/  
demisting  
Switching air conditioning on  
or off  
Press the 9 button: the integrated in-  
dicator light comes on. This function  
enables rapid demisting or de-icing of  
the rear screen and de-icing of the rear  
view mirrors (on equipped vehicles).  
In automatic mode, the system switches  
the air conditioning system on or off,  
depending on the climate conditions.  
Press the button 5 to force the air con-  
ditioning to stop. The integrated warn-  
ing light will go out.  
To exit this function, press button 9  
again. Demisting automatically stops.  
Vehicles fitted with ECO mode  
(switch 11 or, depending on  
the vehicle, from the multime-  
dia screen): once activated, ECO  
mode may reduce the performance  
of the automatic air conditioning.  
Please refer to the information on  
“Eco-driving” in Section 2  
3.15  
AUTOMATIC CLIMATE CONTROL: control B (4/4)  
3
Stopping the system  
Turn the control 3 to “OFF” to stop the  
system. To start it, turn control 6 to  
adjust the fan speed.  
8
Manual use  
Air recirculation (isolation of  
the passenger compartment)  
Press the 8 button: the integrated indi-  
cator light comes on.  
This function is managed automatically  
(operation is confirmed by a warning  
light on button 8), but you can also acti-  
vate it manually.  
Prolonged use of this position may lead  
to odours, caused by non-renewal of  
air, and the formation of condensation  
on the windows.  
We therefore advise you to return to au-  
tomatic mode as soon as air recircula-  
tion is no longer needed, by pressing  
button 8.  
Fuel consumption increases when  
the air conditioning is being used  
(switch it off when it is not required).  
The demisting/de-icing will still take  
priority over the air recirculation.  
3.16