Get Operation -> Opening and closing Guide for Seat Ateca SUV 2020

Opening and closing

cle. The range of the vehicle key with remote

control and new battery is several metres

around the vehicle.

Opening and closing

Set of vehicle keys

If it is not possible to open or close the vehicle

using the remote control key, this should be

Related video

re-synchronised page 97 or the battery

›››

changed page 96.

›››

Different keys belonging to the vehicle may

be used.

Fig. 88 Vehicle key with alarm button.

Control lamp on the vehicle key

Fig. 86 Opening and

closing

Key to the Fig. 87, Fig. 88

›››

When a button on the vehicle key is pressed,

the control lamp flashes Fig. 87 (arrow)

›››

1

Unlock the vehicle

Lock the vehicle

once briefly, but if the button is held down for

a longer period the control lamp flashes sev-

eral times, such as in convenience opening.

2

3

Unlock only the rear lid. Press the button

until all the turn signals on the vehicle

flash briefly. You have 2 minutes to open

the rear lid. Once this time has passed, it

will lock again. In addition, the lamp on

the key flashes.

Vehicle key

If the vehicle key control lamp does not light

up when the button is pressed, replace the

key's battery page 96.

›››

Spare key

4

5

Folding the key shaft in and out

To obtain a spare key and other vehicle keys,

the vehicle ID number is required.

Alarm button*. Only press in the event of

an emergency! When the alarm button is

pressed, the vehicle's sounds and the turn

signals light up for a short time. Press

again to disconnect.

Each new key contains a microchip which

must be coded with the data from the vehicle

electronic immobiliser. A vehicle key will not

work if it does not contain a microchip or the

microchip has not been encoded. This is also

true for keys which are specially cut for the

vehicle.

Fig. 87 Assignment of buttons on the remote

control key.

With the vehicle key the vehicle may be

locked or unlocked remotely page 97.

›››

»

The vehicle key includes an emitter and bat-

tery. The receiver is in the interior of the vehi-

95

Operation

The vehicle keys or new spare keys can be

obtained from a SEAT Official Service, a spe-

cialised workshop or an approved key service

qualified to create this kind of key.

To change the battery

Note

●

Only use the key button when you require

the corresponding function. Pushing the

button unnecessarily could accidentally

unlock the vehicle or trigger the alarm. It is

also possible even when you are outside

the radius of action.

New keys or spare keys must be synchronised

before use page 97.

›››

WARNING

Never leave children or disabled persons

in the vehicle. In case of emergency, they

may not be able to leave the vehicle or

manage on their own.

●

Key operation can be greatly influenced

by overlapping radio signals close to the

vehicle working in the same range of fre-

quencies, for example, radio transmitters or

mobile telephones.

●

Fig. 89 Vehicle key: opening the battery com-

●

Obstacles between the remote control

●

An uncontrolled use of the key could start

partment cover.

and the vehicle, bad weather conditions

and discharged batteries can considerably

reduce the range of the remote control.

the engine or activate any electric equip-

ment (e.g. electric windows), causing risk

of accident. The doors can be locked using

the remote control key. This could become

an obstacle for assistance in an emergen-

cy situation.

●

If the buttons of the vehicle key are

pressed or one of the central locking but-

tons page 100 is pressed repeatedly in

›››

short succession, the central locking brief-

ly disconnects as protection against over-

loading. The vehicle is then unlocked. Lock

it if necessary.

●

Never forget the keys inside the vehicle.

An unauthorised use of your vehicle could

result in injury, damage or theft. Therefore

always take the key with you when you

leave the vehicle.

●

Spare remote control keys are available

at your Technical Service, where they must

be matched to the locking system.

●

Never remove the key from the ignition if

Fig. 90 Vehicle key: removing the battery.

the vehicle is in motion. Otherwise, the

steering could suddenly block and it would

be impossible to steer the vehicle.

●

Up to five remote control keys can be

SEAT recommends you ask a specialised

workshop to replace the battery.

used.

The battery is located to the rear of the vehi-

cle key, under a cover.

CAUTION

All of the vehicle keys contain electronic

components. Protect them from damage,

impacts and humidity.

96

Opening and closing

Changing the battery

The battery of an unlocked vehicle parked for

a long period (e.g. in a private garage) may

run down and fail to start the motor.

Synchronize the vehicle key

●

Unfold the vehicle key blade page 95.

›››

If the  button is pressed frequently outside

of the vehicle range, it is possible that the ve-

hicle can no longer be locked or unlocked us-

ing the key. In this case, the key must be re-

synchronised as described below:

●

Remove the cover from the back of the ve-

hicle key Fig. 89 in the direction of the ar-

row

›››

WARNING

The incorrect use of the central locking

system may cause serious injuries.

.

›››

●

Extract the battery from the compartment

using a suitable thin object Fig. 90.

›››

●

The central locking system will lock all

●

Unfold the vehicle key blade page 95.

›››

●

Place the new battery in the compartment

doors. A vehicle locked from the inside can

prevent any non-authorised individual from

opening the doors and accessing the vehi-

cle. Nevertheless, in case of emergency or

accident, locked doors will complicate ac-

cess to the vehicle interior to help the pas-

sengers.

●

If necessary, remove the cover from the

as shown Fig. 90, pressing in the opposite

direction to that shown by the arrow

›››

driver door lever page 107.

›››

.

›››

●

Press the  button on the vehicle key. For

●

Fit the cover as shown Fig. 89, pressing it

›››

this, it must remain with the vehicle.

onto the vehicle key casing in the opposite di-

rection to that shown by the arrow until it

clicks into place.

●

Open the vehicle within one minute using

the key blade. The key has been synchron-

ised.

●

Never leave children or disabled people

alone in the vehicle. The central locking

button can be used to lock all the doors

from within. Therefore, passengers will be

locked inside the vehicle. Individuals locked

in the vehicle can be exposed to very high

or very low temperatures.

CAUTION

●

If necessary, fit the cap.

●

If the battery is not changed correctly,

the vehicle key may be damaged.

●

Use of unsuitable batteries may damage

Central locking

the vehicle key. For this reason, always re-

place the dead battery with another of the

same voltage, size and specifications.

●

Depending on the time of the year, tem-

Introduction

peratures inside a locked and closed vehi-

cle can be extremely high or extremely low

resulting in serious injuries and illness or

even death, particularly for young children.

●

When fitting the battery, check that the

Central locking functions correctly when all

the doors and the rear lid are correctly shut. If

the driver door is open, the vehicle cannot be

locked with the key.

polarity is correct.

●

Never leave individuals locked in a closed

For the sake of the environment

Please dispose of your used batteries cor-

rectly and with respect for the environ-

ment.

and locked vehicle. In case of emergency,

they may not be able to exit the vehicle by

themselves or get help.

If the vehicle has the Keyless Access locking

and ignition system, it may only be locked

with the ignition off and the driver's door

closed.

97

Operation

Unlocking one side of the vehicle only

Accidental lock-out

Description

When you lock the vehicle with the key, the

doors and the rear lid are locked. When you

open the door, you can either unlock only the

driver door, or all the vehicle doors. To select

the required option, use Easy Connect*

The central locking system prevents you from

being locked out of the vehicle in the follow-

ing situations:

Central locking allows all doors, the rear lid

and the tank flap to be unlocked centrally:

●

From outside, using the vehicle key

●

If the driver door is open, the vehicle cannot

page 99.

›››

●

be locked with the central locking switch

›››

page 98.

›››

From outside with the Keyless Access

page 100 system,

page 100.

›››

●

Automatic locking (Auto Lock)*

Lock the vehicle with the remote control key,

when all the doors and the rear lid have been

closed. This prevents the accidental locking

of the vehicle.

From inside, by pushing the central locking

The Auto Lock function locks the doors and

the rear lid when the vehicle exceeds a speed

of about 15 km/h (9 mph).

button page 100.

›››

Various functions are available to improve the

vehicle safety:

The vehicle is unlocked again when the igni-

tion key is removed. Alternatively, the vehicle

can also be unlocked via the central locking

switch or by pulling one of the inside door

handles.

Note

●

Security system “Safe” page 103

Self-locking system to prevent involuntary

›››

●

Never leave any valuable items in the ve-

●

hicle unattended. Even a locked vehicle is

not a safe.

unlocking

●

If the LED on the driver door sill lights up

●

Selective unlocking system

In the event of an accident in which the air-

bags inflate, the doors will be automatically

unlocked to facilitate access and assistance.

for about 30 seconds when the vehicle is

locked, the central locking system or anti-

theft alarm* is not working properly. You

should have the fault repaired at a SEAT

Official Service or specialised workshop.

●

Automatic speed dependent locking and

unlocking system (Auto Lock)

●

Emergency unlocking system

Turn signals

Self-locking system to prevent involuntary

unlocking

The turn signals will flash twice when the ve-

hicle is unlocked and once when the vehicle

is locked.

●

The vehicle interior monitoring of the an-

ti-theft alarm* system will only function as

intended if the windows and the sunroof*

are closed.

It is an anti-theft system and prevents the un-

intentional unlocking of the vehicle. If the ve-

hicle is unlocked and none of the doors (in-

cluding the boot) are opened within 30 sec-

onds, it re-locks automatically.

If it does not flash, this indicates that one of

the doors, the rear lid or the bonnet is not

closed correctly.

Central locking settings

Central locking settings can be changed in

the Easy Connect* system.

98

Opening and closing

●

Unlocking doors

Lock: press the  Fig. 91 button.

Locking the vehicle without the “Safe” se-

The Safe* security system and the anti-theft

alarm* deactivate immediately when only

the driver door is opened.

›››

●

Select: key  > SETTINGS

and closing Central locking

locking the doors.

>

Opening

curity system: push the  button again and

hold for 2 seconds.

>

Un-

In vehicles with Easy Connect*, you can pro-

gramme the security central locking system

●

Unlock: press the  button.

Unlocking the rear lid: hold down the 

You can choose to unlock allthe doors or

only the driver doorwhen you unlock the

vehicle. In all the options, the fuel tank flap is

also unlocked.

directly page 98.

›››

●

button for at least 1 second.

WARNING

The vehicle will be locked again automatical-

ly if you do not open one of the doors or the

rear lid within 30 seconds after unlocking the

car. This function prevents the vehicle from

remaining unlocked if the unlocking button is

pressed by mistake. This does not apply if you

press the  button for at least one second.

Observe the safety warnings

in Lock-

›››

With the Driversetting, when you press the

 button on the remote control key once, only

the driver door is unlocked. If that button is

pressed twice, the rest of the doors and the

rear lid will be unlocked.

ing system “Safe” on page 104.

Note

●

Do not use the remote control key until

the vehicle is visible.

If the  button is pressed, all the vehicle

doors are locked. At the same time, a confir-

mation signal* is heard.

●

Other functions of the remote control key

page 113, Convenience open/close

›››

Selective unlocking system

function.

The selective unlocking system allows you to

only unlock the driver door and the fuel tank

flap. All other doors and the rear lid remain

locked.

Unlock and lock from the outside

Unlocking the driver's door and tank flap:

●

Press (once) the  button on the remote

control key or turn the key once in the open-

ing direction.

Unlocking all the doors, the rear lid and the

tank flap simultaneously:

●

Within 5 seconds, press (twice) the  but-

ton on the remote control key, or turn the key

twice within 5 seconds in the opening direc-

tion.

Fig. 91 Remote control key: buttons.

99

Operation

Unlocking and locking from the in-

side

Unlock and lock the vehicle with

Keyless Access*

WARNING

The central locking switch also works

with the ignition switched off, except when

the “safe” system is activated.

●

The central locking switch does not oper-

ate if the vehicle is locked from the outside

and the security system is switched on.

●

Locked doors could delay assistance in

an emergency. Do not leave anyone, espe-

cially children, in the vehicle.

Note

Your vehicle will lock automatically when it

reaches a speed of about 15 km/h (9 mph)

Fig. 94 Keyless Access: proximity zones.

Fig. 92 Driver's door: central locking switch.

(Auto Lock) page 98. You can unlock the

›››

●

Lock: press the  Fig. 92 button.

›››

vehicle again using the  button on the

central locking switch.

Unlock: press the  Fig. 92 button.

›››

Please note the following when using the

central locking switch to lock your vehicle:

Related video Keyless Access

●

It is not possible to open the doors or the

rear lid from the outside (for safety reasons,

e.g. when stopped at traffic lights).

●

The LED in the central locking switch lights

up when all the doors are closed and locked.

Fig. 95 Door handle: sensor surfaces

●

You can open the doors individually from

Fig. 95

›››

the inside by pulling the inside door handle.

●

Fig. 93 Handsfree

A

Unlocking sensor surface on the inside of

the door handle.

In the event of an accident in which the air-

bags inflate, doors locked from the inside will

be automatically unlocked to facilitate ac-

cess and assistance.

B

Locking sensor surface on the outside of

the door handle.

100

Opening and closing

Depending on the equipment, the vehicle

may have the Keyless Access system.

one of the sensor surfaces on the door han-

dles is touched or the softtouch/handle on

the rear lid is operated.

The vehicle will lock again after a few sec-

onds if you unlock the vehicle but fail to open

any door or boot hatch.

Keyless Access is a key-free locking and igni-

tion system to unlock and lock the vehicle

without actively using its key. To do this, all

that is required is to have a valid vehicle key in

the detection area where you are attempting

The following features are then available

without having to use the vehicle key actively:

Unlocking and opening the doors

(Keyless-Entry)

●

Keyless Entry: unlocking the vehicle using

●

Grip one of the front door handles. When

the handles of the front doors or the soft-

touch/handle on the rear lid.

you do this, you touch the sensor surface

to access the vehicle Fig. 94 and to touch

›››

A

Fig. 95

›››

(arrow) of the handle and the

one of the sensor surfaces on the door han-

●

vehicle unlocks.

dles Fig. 95 or operate the softtouch/han-

Keyless Exit: locking the vehicle using the

›››

dle on the rear lid page 108

.

›››

sensor of the driver or passenger door han-

dle.

›››

●

Open the door.

The vehicle can be unlocked and locked via

the front doors only. When doing so, the re-

mote control key must be no further than ap-

prox. 1.5 m away from the door handle.

On vehicles with selective opening or info-

tainment system configuration, pulling the

door handle twice will unlock all doors.

●

Easy Open: opening the rear lid moving one

foot below the rear bumper page 111.

●

›››

Press & Drive: keyless starting of the engine

with the starter button page 243.

›››

It does not matter where you carry the key,

e.g. in your jacket pocket.

In vehicles without the “Safe” security sys-

tem: closing and locking the doors

(Keyless-Exit)

The central locking and locking systems op-

erate in the same way as a normal locking

and unlocking system. Only the controls

change.

Once the doors have been locked, they can-

not be opened again immediately. This will

enable you to check that the doors are prop-

erly closed.

●

Switch the ignition off.

●

Close the driver's door.

Unlocking the vehicle is confirmed with a

double flash of the indicator lights; locking by

a single flash.

●

Touch (once) the locking sensor surface

If you wish you may unlock only the corre-

sponding door or the entire vehicle. The nec-

essary adjustments can be made in vehicles

with a driver information system

B

Fig. 95

(arrow) on one of the front door

›››

handles. The door that is used must be

closed.

If the vehicle is locked and then all doors and

the rear lid are closed leaving the last key

used inside the vehicle and none outside, the

vehicle will not lock immediately. All the ve-

hicle's indicator lights will flash four times.

The vehicle will lock after a few seconds if

you do not open any door or the rear lid.

page 89 page 74.

›››

In vehicles with the “Safe” security sys-

tem: closing and locking the doors

(Keyless-Exit)

General information

If a valid key is in the proximity of the car,

●

Switch the ignition off.

Close the driver's door.

Fig. 94 the Keyless Access locking and

›››

●

»

starting system gives the key entry as soon as

101

Operation

●

Touch (once) the sensor surface Fig. 95

the passenger doors are automatically disa-

bled.

vehicle will not unlock. Deactivation is also

possible if the vehicle is locked through the

driver’s door lock.

›››

B

(arrow) on one of the front door handles.

The vehicle locks with the “Safe” security sys-

If one of the sensor surfaces on the door han-

dles is often activated in an unusual manner

with the vehicle locked (e.g. by the branches

of a bush rubbing against it), all proximity

sensors are disabled for a certain period of

time.

tem page 103. The door that is used must

›››

●

To check that the function has been deacti-

be closed.

●

vated, wait at least 10 seconds, grip and pull

on the door handle. The door should not

open.

Touch (twice) the sensor surface Fig. 95

›››

B

(arrow) of one of the front door handles to

lock the vehicle without activating the

“Safelock” security system page 103.

The next time the door can only be unlocked

via the remote control or the lock cylinder.

The next time the door is locked/unlocked,

Keyless Access will be active again.

›››

Sensors will again be enabled:

Unlocking and locking the boot hatch

●

After a time.

When the vehicle is locked, the rear lid auto-

matically unlocks on opening if there is a val-

id vehicle key in the proximity Fig. 94.

●

OR: if the vehicle is unlocked with the but-

ton  on the key.

Convenience functions

›››

●

OR: if the boot is opened.

To close all the electric windows and the sun-

roof using the comfort function, keep a fin-

ger for a few seconds on the locking sensor

Open or close the rear lid normally.

●

OR: if the vehicle is unlocked manually with

the key.

After closing, the hatch locks automatically. If

the complete vehicle is unlocked, the rear lid

will not lock automatically after closing it.

B

surface Fig. 95

(arrow) of the door han-

›››

dle until the windows and roof have closed.

Keyless Access temporary disconnection

function*

How the doors open when touching the sen-

sor surface on the door handle will depend

on the settings that have been activated in

the infotainment system, using the button 

What happens when locking the vehicle

with a second key

You can deactivate the vehicle's Keyless

Access unlocking for one locking and unlock-

ing cycle.

If there is a vehicle key inside the vehicle and

it is locked from the outside with a second ve-

hicle key, the key inside the vehicle is blocked

>

SETTINGS

> Opening and closing.

●

Move the gear lever to position P (if the ve-

hicle has automatic gearbox), since other-

wise the vehicle cannot be locked.

CAUTION

for engine ignition page 243. In order to

›››

enable engine ignition, press the  button on

The sensor surfaces on the door handles

could engage if hit with a water jet or high

pressure steam if there is a valid vehicle

key in the proximity. If at least one of the

electric windows is open and the sensor

●

Close the door.

the key inside the vehicle.

●

Push the central locking button  on the re-

Automatically disabling sensors

mote control and touch the locking sensor

surface of the driver door handle

If the vehicle is not locked or unlocked for a

long period of time, the proximity sensors on

B

surface Fig. 95

(arrow) on one of the

›››

B

Fig. 95

within the following 5 seconds.

›››

Do not grasp the door handle; otherwise the

102

Opening and closing

the control panel screen stating that the

“Safe” security system is activated.

handles is activated continuously, all win-

dows will close.

could happen if any other radio frequency

signal interferes with the key signal (e.g.

from a mobile device accessory) or if the

key is covered by another object (e.g. an

aluminium case).

Lock the vehicle and activate the “Safe”

security system.

Note

●

If the vehicle battery has little or no

●

If the sensors are very dirty, e.g. have a

●

Press the locking button  once on the ve-

charge, or the vehicle key battery is almost

or entirely out of charge, you will probably

not be able to lock or unlock the vehicle

with the Keyless Access system. The vehi-

cle can be unlocked or locked manually

layer of salt, the correct functioning of the

sensors on the door handles may be affec-

ted. In this case, clean the vehicle.

hicle key.

Lock the vehicle without activating the

“Safe” system.

●

If the vehicle is equipped with an auto-

matic gearbox, it may only be locked in the

gear stick is in position P.

page 107.

›››

●

Press the locking  button on the vehicle

key twice.

To control the proper locking of the vehi-

cle, the release function is disabled for ap-

prox. 2 seconds.

●

To improve the safety of your vehicle, the

●

On vehicles with the Keyless Access locking

remote control of the system is equipped

with a position sensor. If this remote control

does not detect movement for a certain

length of time, the system will conclude

that the vehicle cannot be opened (e.g. on

a night table) so it will be disabled.

and ignition system: touch the sensor surface

on the outside part of the door handle twice.

●

If the message Keyless access system

faultyis displayed on the screen of the

dash panel, abnormalities may occur in the

operation of the Keyless Access system.

Contact a specialised workshop. SEAT rec-

ommends visiting a SEAT dealership for

this.

When the “Safe” security system is disa-

bled, the following needs to be taken into

account:

●

The vehicle can be opened and unlocked

Locking system “Safe”¹⁾

from the inside using an inside door handle.

●

Depending on the function set on the in-

●

fotainment system for the mirrors, the exte-

rior mirrors will unfold and the surround

lighting will come on when unlocking the

vehicle using the sensor surface on the

driver and passenger door handles

The anti-theft alarm is activated.

When the vehicle is locked, the “Safe” securi-

ty system puts the door handles out of opera-

tion and makes it difficult for unauthorized

people to enter. The doors cannot be opened

●

The vehicle interior monitoring system and

the anti-tow system are disabled.

“Safe” status

from inside

.

page 129.

›››

●

The flashing frequency of the diode in the

door sill immediately confirms the process.

Initially, the diode flashes in a fast sequence

If there is no valid key inside the vehicle

or the system fails to detect one, a warning

will display on the dash panel screen. This

Depending on the vehicle, when switching the

ignition off, a warning may be displayed on

»

1)

Available depending on market and version.

103

Operation

●

for a brief period, then it stops for approxi-

mately 30 seconds and, lastly continues

flashing slowly.

quently closed, they will be automatically in-

cluded in the protection areas of the vehicle

and the turn signals will flash accordingly

when the doors close.

Movement inside the vehicle (in vehicles

with interior monitoring page 105).

●

›››

When the vehicle is towed (in vehicles with

anti-tow system page 105).

●

›››

WARNING

When the vehicle is raised (in vehicles with

●

The turn signal light will flash twice on

Do not leave anyone (especially children)

in the vehicle if it is locked from the outside

and the “Safe” security system* is activa-

ted, as the doors and windows cannot then

be opened from the inside. Locked doors

could delay assistance in an emergency.

anti-tow system page 105).

●

›››

opening and deactivating the alarm.

When the vehicle is transported on a ferry

●

The turn signal light will flash once on clos-

or by rail (vehicles with an anti-tow system or

vehicle interior monitoring page 105).

ing and activating the alarm.

›››

When does the system trigger an alarm?

●

When a trailer connected to the anti-theft

alarm system is disconnected.

The anti-theft alarm siren will be triggered for

about 30 seconds alongside a sound and

optical (flashing) warning signals and will be

repeated about ten times when the vehicle is

locked and the following unauthorised ac-

tions are attempted:

How to turn OFF the alarm

●

Anti-theft alarm system*

Unlock the vehicle with the unlock button 

of the key.

●

Description

OR: turn the ignition on with a valid key.

●

The anti-theft alarm makes it more difficult to

break into the vehicle or steal it. The system

will initiate acoustic and optical warning sig-

nals when your vehicle is tried to be forced.

Opening a door that is mechanically un-

If the driver’s door is unlocked mechanically

using the key, the key must be inserted into

the ignition, and the ignition must be turned

on within 15 seconds of opening the door.

locked using the vehicle key without switching

on the ignition in the next 15 seconds (in cer-

tain markets, such as the Netherlands, there is

no 15 second waiting time and the alarm is

activated immediately on opening the door).

The anti-theft alarm is automatically turned

on when the vehicle is locked with the key.

The system is immediately activated and the

turn signal light located on the driver door will

flash along with the turn signals, indicating

that the alarm and the locking security sys-

tem (double lock) have been turned on.

Otherwise, the alarm will trigger for 30 sec.

and the ignition will be blocked.

●

A door is opened.

Opening the bonnet.

The rear lid is opened.

When the ignition is switched on with a non-

●

CAUTION

●

If the anti-theft security system is switched

off, the vehicle interior monitoring and the

tow-away protection are automatically

disconnected.

●

authorised key.

●

If any of the doors or the bonnet are open,

they will not be included in the protection

zones of the vehicle when the alarm is con-

nected. If the door or the bonnet are subse-

Undue manipulation of the alarm.

Disconnection of the vehicle battery.

●

104

Opening and closing

The vehicle interior monitoring and the anti-

tow system are automatically switched on

again next time the vehicle is locked.

Interior monitoring and the anti-

tow system*

Note

●

After 28 days, the indicator light will be

switched off to prevent the battery from ex-

hausting if the vehicle has been left parked

for a long period of time. The alarm system

remains activated.

It is a monitoring or control function incorpo-

rated in the anti-theft alarm* which detects

unauthorised vehicle entry by means of ultra-

sound.

If you wish to switch off the vehicle interior

monitoring and the anti-tow system, it must

be done each time that the vehicle is locked;

if not, they will be automatically switched on.

●

If, after the audible warning goes off, an-

other monitored area is accessed (e.g. the

rear lid is opened after a door has been

opened), the alarm is triggered again.

The vehicle interior monitoring and anti-tow

sensor (tilt sensor) are automatically switch-

ed on when the anti-theft alarm is switched

on. In order to activate it, all the doors and

the rear lid must be closed.

The vehicle interior monitoring and the anti-

tow system should be switched off if animals

are left inside the locked vehicle (otherwise,

their movements will trigger the alarm) or

when, for example, the vehicle is transported

or has to be towed with only one axle on the

ground.

●

The anti-theft alarm is not activated

when the vehicle is locked from within using

the central locking button .

If the “Safe” security system* page 103 is

›››

●

If the driver door is unlocked mechanical-

switched off, the vehicle interior monitoring

and the tow-away protection are automati-

cally disconnected.

ly with the key, only the driver door is un-

locked, the rest of the doors remain locked.

Only when the ignition has been turned on

will the other doors be available - but not

unlocked - and the central locking button

will be activated.

Deactivation through the infotainment

system

Activation

●

Turn off the ignition and select: key  >

SETTINGS Opening and closing> Cen-

>

●

It is automatically switched on when the

tral locking

> Interior monitoring.

anti-theft alarm is activated.

●

If the vehicle battery is run down or flat

●

When the vehicle is locked now, the vehicle

interior monitoring and the tow-away protec-

tion are switched off until the next time the

door is opened.

then the anti-theft alarm will not operate

correctly.

Deactivation

●

Vehicle monitoring remains active even if

●

Open the vehicle with the key, either me-

the battery is disconnected or not working

for any reason.

chanically or by pressing the  button on the

remote control. The time period from when

the door is opened until the key is inserted in

the contact should not exceed 15 seconds,

otherwise the alarm will be triggered.

False alarms

●

The alarm is triggered immediately if one

of the battery cables is disconnected while

the alarm system is active.

Interior monitoring will only operate correctly

if the vehicle is completely closed. Please ob-

serve related legal requirements.

»

●

Press the  button on the remote control

twice. The volumetric sensor and tilt sensors

will be deactivated. The alarm system re-

mains activated.

105

Operation

The following cases may cause a false

alarm:

●

once all the doors are closed (including the

rear lid).

Open and close the doors and the rear lid

only when there is nobody in the way.

●

Open windows (partially or fully).

●

CAUTION

Panoramic/tilting sunroof open (partially or

completely).

●

When opening and closing in an emergen-

cy, carefully disassemble components and

then reassemble them carefully to avoid

damage to the vehicle.

Doors

Movement of objects inside the vehicle,

such as loose papers, items hanging from the

rear vision mirror (air fresheners), etc.

Introduction

The doors and rear lid can be locked man-

ually and partially opened, for example if the

key or the central locking is damaged.

Note

●

If the vehicle is relocked and the alarm is

activated without the volumetric sensor

function, relocking will activate the alarm

with all its functions, except the volumetric

sensor. This function is reactivated when

the alarm is switched on again, unless it is

deliberately switched off.

WARNING

Opening and closing doors carelessly can

cause serious injury.

●

If the vehicle is locked from outside, the

doors and windows cannot be opened from

the inside.

●

If the alarm has been triggered by the

volumetric sensor, this will be indicated by

a flashing of the warning lamp on the driver

door when the vehicle is opened. The flash

is different to the flash indicating the alarm

is activated.

●

Never leave children or disabled people

alone in the car. They could be trapped in

the car in an emergency and will not be

able to get themselves to safety.

●

Depending on the time of the year, tem-

●

The vibration of a mobile phone left in-

peratures inside a locked and closed vehi-

cle can be extremely high or extremely low

resulting in serious injuries and illness or

even death, particularly for young children.

side the vehicle may cause the vehicle in-

terior monitoring alarm to trigger, as both

sensors react to movements and shakes in-

side the vehicle.

●

If on activating the alarm, any door or the

rear lid is open, only the alarm will be acti-

vated. The vehicle interior monitoring and

the anti-tow system will only be activated

WARNING

Getting in the way of the doors and the rear

lid is dangerous and can lead to serious in-

jury.

106

Opening and closing

As a general rule, when the driver door is

locked manually all other doors are locked.

When it is unlocked manually, only the driver

door opens. Please observe the instructions

relating to the anti-theft alarm system

Emergency unlocking or locking of

the driver’s door

Emergency lock of doors without

lock cylinders

page 104.

›››

●

Unfold the vehicle key blade page 95.

›››

●

Insert the key shaft into the lower opening in

the cover on the driver door handle Fig. 97

then remove the cover upwards.

›››

●

Insert the key blade into the lock cylinder to

unlock or lock the vehicle.

Fig. 96 Driver door handle: Concealed lock

Fig. 98 Locking the door manually.

Special characteristics

cylinder.

If the central locking system should fail to

work at any time, doors with no lock cylinder

will have to be locked separately.

●

The anti-theft alarm will remain active

when vehicles are unlocked. However, the

alarm will not be triggered page 104.

›››

●

After the driver door is opened, you have 15

The emergency lock is located on the front of

the front passenger's door and the rear

doors. It can only be seen if the door is open.

seconds to switch on the ignition. Once this

time has elapsed, the alarm is triggered.

●

Switch the ignition on. The electronic immo-

●

Pull the cap out of the opening.

Insert the key in the inside slot and turn it to

bilizer recognises a valid vehicle key and de-

activates the anti-theft alarm system.

●

the right as far as it will go (if the door is on

the right side) or to the left (if the door is on

the left side).

Note

The anti-theft alarm is not activated when

the vehicle is locked manually using the

●

Replace the cap.

Fig. 97 Driver door handle: lever the cover off

key shaft page 97.

›››

Once the door has been closed it can no lon-

ger be opened from the outside. Pull the inte-

rior door handle once to unlock and open the

door.

If the central locking system should fail to op-

erate, the driver door can still be locked and

unlocked by turning the key in the lock.

107

Operation

Deactivating the childproof lock

Childproof locks

●

Closing the rear lid without observing

and ensuring it is clear could cause serious

injury to you and to third parties. Make sure

that no one is in the path of the rear lid.

–

Unlock the vehicle and open the door

whose childproof lock you want to deacti-

vate.

●

Never drive with the rear lid open or half-

–

With the door open, rotate the groove in the

closed, exhaust gases may penetrate into

the interior of the vehicle. Danger of poi-

soning!

door using the ignition key, anti-clockwise

for the left hand side doors Fig. 99 and

›››

clockwise for the right hand side doors.

●

Never leave the vehicle unattended or al-

low children to play inside or next to it, es-

pecially if the rear lid is open. Children

could enter the luggage compartment,

close the rear lid and become trapped. A

locked vehicle can reach extremely high

and low temperatures, depending on the

time of year, thus causing serious injuries,

illness or even death.

Once the childproof lock is activated, the

door can only be opened from the outside.

Fig. 99 Childproof lock on the left hand side

door.

Rear lid

Introduction

WARNING

Careless and unsuitable locking, opening

and closing of the rear lid can cause acci-

dents and serious injury.

The childproof lock prevents the rear doors

from being opened from the inside. This sys-

tem prevents minors from opening a door ac-

cidentally while the vehicle is running.

CAUTION

This function is independent of the vehicle

electronic opening and locking systems. It

only affects rear doors. It can only be activa-

ted and deactivated manually, as described

below:

Before opening or closing the rear lid, make

sure that there is enough space to open or

close it, e.g. when pulling a trailer or in a

garage.

●

The rear lid must not be opened when the

reverse or rear fog lights are lit. This may

damage the tail lights.

Note

Activating the childproof lock

Before closing the rear lid, make sure that

the key has not been left inside the luggage

compartment.

●

Do not close the rear lid by pushing it

–

Unlock the vehicle and open the door in

which you wish to activate the childproof

lock.

down with your hand on the rear window.

The glass could smash. Risk of injury!

●

Ensure the rear lid is locked after closing

it. If not, it may open unexpectedly while

driving.

–

With the door open, rotate the groove in the

door using the ignition key, clockwise for

the left hand side doors Fig. 99 and anti-

›››

clockwise for the right hand side doors.

108

Opening and closing

If the doors are locked, the rear lid is also

locked.

Opening the rear lid

Opening and closing the rear lid

●

Unlock the vehicle page 97 and briefly

›››

press the handle of the rear lid. On vehicles

with Keyless Access you can directly press

the handle of the rear lid. The rear lid is un-

locked if an authorised key is recognised in

the proximity of the vehicle.

Rear lid with electric opening and

closing*

●

OR: press the button on the centre console

for at least one second Fig. 102. The but-

ton also works when the ignition is switched

off.

›››

●

OR: press and hold the  button of the ve-

Fig. 100 Rear lid: handle

hicle key for approx. 1 second. If the vehicle is

locked, only the rear lid is unlocked (the doors

remain locked).

The rear lid opening system operates electri-

cally. It is activated by exerting slight pressure

●

OR: on vehicles with Keyless Access and

on the handle Fig. 100.

›››

sensor-controlled opening you can open the

rear lid by moving one foot in the area of the

sensors located below the rear bumper (Easy

Open page 111). The rear lid will be auto-

matically opened.

To lock or unlock the rear lid, press the  or

 buttons of the vehicle key.

Fig. 101 Rear lid: button to close the rear lid.

A warning appears on the instrument panel

display if the rear lid is open or not properly

closed.* An audible warning is also given if it

is opened while the vehicle is moving faster

than 6 km/h (4 mph)*.

›››

Closing the rear lid

●

Briefly press the  button on the rear lid

Fig. 101

in Introduction on

›››

Opening and closing

page 108.

●

To open: place slight pressure on the han-

dle. The rear lid opens automatically.

●

OR: press the  button located on the

centre console until the rear lid is closed

●

To close: hold one of the handles on the in-

Fig. 102.

Fig. 102 Centre console: button to open and

›››

close the rear lid.

ner trim and close it by moving it downwards,

●

OR: on vehicles with Keyless Access, press

and hold the  vehicle key button until the

rear lid is closed, or move one foot into the

or press the button on the rear lid* Fig. 101.

›››

»

109

Operation

area of the sensors located below the rear

Particular features if towing a trailer

Resetting and memorising the opening an-

gle

bumper (Easy Open) page 111. The key

›››

If the factory-fitted towing bracket is electri-

of the vehicle must not be further away than

1.5 m from the boot or inside the vehicle.

cally connected to a trailer page 324, the

For the rear lid to reopen completely, the

opening angle must be reset and memorised

again.

›››

electric rear lid can only be opened or closed

with the buttons on the rear lid itself.

●

OR: manually move the rear lid in the direc-

tion of closing until it closes automatically.

●

Release the rear lid and open it to the

Acoustic warnings

●

The rear lid goes down automatically to the

memorised height.

final position and also closes automatically

›››

Throughout the process of opening or closing

the rear lid, acoustic warnings can be heard.

Exception: when the rear lid is opened man-

ually using the handle or the Easy Open func-

tion with the movement of the foot or closed

using the button on the rear lid itself

●

Lift the rear lid by hand as far as it goes. To

in Introduction on page 108.

do this, some force will have to be used.

●

Interrupting opening or closing

Press the  button Fig. 101 on the rear

›››

lid for at least 3 seconds.

After beginning to open or close the rear lid,

the action can be halted by pressing one of

the  buttons.

●

This resets and memorises the factory-set

Fig. 101.

›››

opening angle. Memorisation is indicated by

blinking of the hazard warning lights and an

audible warning.

Continue opening or closing the rear lid by

hand. To do this, some force will have to be

used.

Modifying and memorising the opening

angle

Automatic protection against overheating

If the space behind or above the vehicle is

less than the travel area of the rear lid, you

can change the opening angle of the rear lid.

If you press one of the  buttons again, the

rear lid will move again in the original direc-

tion.

If the system is operated repeatedly in a short

space of time, it automatically switches off to

prevent overheating.

To memorise a new opening angle, the rear

lid must be open at least halfway.

If the rear lid is met with resistance or an ob-

stacle during the automatic opening or clos-

ing, opening or closing will be interrupted im-

mediately. For the closing process, the rear

lid opens again slightly.

Once the system is cool again, the function

can be reused. Until then, the rear lid can only

be opened and closed by hand using reason-

able force.

●

Interrupt the opening process in the desired

position.

●

Press the  button Fig. 101 on the rear

›››

If with the rear lid open the vehicle battery is

lid for at least 3 seconds.

●

Check why it has not been possible to open

disconnected page 352 or the corre-

›››

or close the rear lid.

sponding fuse burns out page 54, the sys-

›››

The opening angle is memorised. Memorisa-

tion is indicated by blinking of the hazard

warning lights and an audible warning.

tem will have to be reset. This requires closing

the rear lid completely once.

●

Try to open or close the rear lid again.

●

If necessary, the rear lid can be opened or

closed by hand using reasonable force.

110

Opening and closing

Emergency unlocking

page 112

If there is a valid vehicle key in the proximity

of the rear lid, it is possible to unlock and

open or close it moving one foot in the area of

the sensors located under the rear bumper.

(provided a valid vehicle key is in the proximi-

ty of the rear lid).

›››

The Easy Open feature is not available or on-

ly has limited availability in the following sit-

uations (examples):

WARNING

●

If a lot of snow builds up on the rear lid or it

is heavily loaded, the rear lid may not open

or, after opening, it may lower by itself due

to the extra weight and cause serious in-

jury.

Switch the ignition off.

●

Stand in front of the rear bumper, in the

●

If the rear bumper is very dirty.

middle.

●

If the rear bumper is wet with salt water, e.g.

●

With a brisk movement, bring your foot and

after having driven on gritted roads.

lower leg as close as you can to the bumper.

The lower part of the leg needs to be close to

the upper sensor area and your foot must be

●

Do not open the rear lid when there is a

●

If the electrical unlocking tow hitch is not

lot of snow on it or when carrying a load

(e.g. on a rack).

covered.

●

If the vehicle has been equipped at a later

1

close to the lower sensor area Fig. 103

.

›››

●

Before opening the rear lid, remove the

time with a tow bracket.

●

Quickly remove your foot and lower leg

snow or the load.

2

from the sensor areas Fig. 103 . The rear

›››

In the event of heavy rain, the Easy Open fea-

ture may take a little longer to open the boot

or may deactivate automatically, to avoid the

boot opening by accident, e.g. because of

the running water.

lid will be automatically opened.

●

If the rear lid fails to open, repeat the pro-

Rear lid with sensor-controlled

opening and closing (Easy Open)

cedure after a few seconds.

The third brake light flashes once to show the

boot has opened with the Easy Open func-

tion.

The Easy Open function can be connected

and disconnected permanently in the info-

tainment system using the button  > SET-

The rear lid can be closed with another foot

movement similar to the opening one (provi-

ded a valid vehicle key is in the proximity of

the rear lid).

TINGS

> Opening and closing

page 89.

›››

WARNING

When closed, the rear lid automatically locks

if the vehicle has been locked beforehand

and there is no valid key inside.

If there is a valid key in the proximity of the

rear lid, in some cases the Easy Open func-

tion may be accidentally activated and the

rear lid will open, for example, when

sweeping under the rear bumper, when di-

recting a water jet or high pressure steam

to the area or when carrying out

Fig. 103 Rear lid with sensor-controlled open-

While the rear lid is in motion (either opening

or closing), it can be stopped with another

foot movement similar to the opening one

ing (Easy Open).

»

111

Operation

maintenance work or repairs in that area. If

accidentally opened, the rear lid could in-

jure somebody situated in its area of oper-

ation or cause material damage.

Window controls

Electrically opening and closing

the windows

●

Therefore, always make sure that there is

no unsupervised valid key in the area near

the rear lid.

●

Before carrying out any maintenance or

repair work on the vehicle, always disable

the Easy Open feature via the infotainment

system.

Fig. 105 Detail of the luggage compartment:

emergency unlocking

●

Before washing the vehicle, always disa-

ble the Easy Open feature via the infotain-

ment system.

The rear lid can be unlocked from inside in

the event of an emergency (e.g. no battery).

●

Before attaching a bicycle rack or a trail-

There is a groove in the luggage compart-

ment allowing access to the emergency

opening mechanism.

er, page 324, always disable the Easy

›››

Open feature via the infotainment system.

Fig. 106 Detail of the driver's door: window

controls.

Unlocking the rear lid from inside the lug-

gage compartment

Emergency unlocking of the rear lid

●

Opening the window: press the button .

Closing the window: pull the button .

●

Remove the cover using the key blade as a

●

lever Fig. 104.

●

›››

Insert the key blade into the slot and move

Buttons on the driver door

the key in the direction of the arrow until the

1

Window on the front left door

Window on the front right door

Window on the rear left door

Window on the rear right door

Safety switch for deactivating the electric

window buttons in the rear doors.

lock unlocks Fig. 105.

›››

2

3

4

5

Fig. 104 Detail of the luggage compartment:

access to emergency unlocking.

112

Opening and closing

The front and rear electric windows can be

operated by using the controls on the driver

door. The other doors each have a switch for

their own window.

Convenience opening:

For the automatic raising function: pull the

button for the corresponding window up-

wards until it reaches the second position.

●

Press and hold the  button on the remote

control key until all the windows and the sun-

roof* have reached the desired position.

For the automatic lowering function: pull

the button for the corresponding window up-

wards until it reaches the second position.

●

Always close the windows fully if you park the

OR: First unlock the vehicle using the  but-

vehicle or leave it unattended

.

ton on the remote control key and then keep

the key in the driver door lock until all the win-

dows and the sunroof* have reached the re-

quired position.

›››

You can use the electric windows for approx.

10 minutes after switching off the ignition if

neither the driver door nor the front passen-

ger door has been opened and the key has

not been removed from the ignition.

Stop automatic movement: push or pull on

the button of the corresponding window.

Resetting one-touch opening and closing

Convenience closing:

The one-touch opening and closing function

is not active after the vehicle battery has

been disconnected or is flat and will have to

be reset.

●

Press and hold button  on the remote

control key until all the windows and the sun-

roof* are closed

Safety switch *

.

›››

5

The safety control Fig. 106

on the driver

›››

●

OR: Keep the key in the driver door in the

"lock" position until all the windows and the

sunroof* are closed.

door can be used to disable the electric win-

dow buttons on the rear doors.

●

Pull the button of the corresponding win-

dow and hold it for one second in this posi-

tion.

Safety switch not pressed: buttons on rear

doors are activated.

During convenience closing, first the windows

and then the sliding sunroof will be closed.

●

Release the button and pull upwards and

Safety switch pressed: buttons on rear doors

are deactivated.

hold again. The one-touch function is now

ready for operation.

Different settings can be changed using the

Easy Connect system. Select: key  > SET-

The safety control symbol  lights up in yel-

low if the buttons on the rear doors are

switched off.

TINGS

> Opening and closing > Window

The automatic one-touch electric windows

can be reinitialised individually or several at a

time.

operations

>

Convenience opening.

One-touch opening and closing

Convenience open/close function

WARNING

The one-touch automatic opening and clos-

ing is used to open or close the windows

completely. It will not be necessary to hold

the button of the corresponding electric win-

dow.

The electric windows can be opened or

closed from outside using the vehicle key:

Observe the safety warnings

duction on page 106.

in Intro-

›››

●

Incorrect use of the electric windows can

result in injury.

»

113

Operation

●

Never close the rear lid without observing

window could not be closed before at-

tempting to close it again.

WARNING

Observe the safety warnings

trically opening and closing the windows

on page 113.

and ensuring it is clear, to do otherwise

could cause serious injury to you and third

parties. Make sure that no one is in the path

of a window.

in Elec-

›››

Window anti-trap function

●

The roll-back function does not prevent

●

If the ignition is switched on, the electric

fingers or other parts of the body getting

pinched against the window frame. Risk of

accident.

equipment could be activated with risk of

injury, for example, in the electric windows.

The roll-back function reduces the risk of in-

jury when the electric windows close.

●

The doors can be locked using the re-

●

If a window is obstructed when closing au-

tomatically, the window stops at this point

mote control key. This could become an

obstacle for assistance in an emergency

situation.

and lowers immediately

Next, check why the window does not close

before attempting it again.

.

›››

Sunroof*

●

Therefore always take the key with you

●

when you leave the vehicle.

●

Introduction

The electric windows will work until the

●

If you try within the following 10 seconds

ignition has been switched off and one of

the front doors has been opened.

The sunroof consists of two glass parts. The

rear part is fixed and cannot be opened. It al-

so has a sun blind.

and the window closes again with difficulty or

there is an obstruction, the automatic closing

will stop working for 10 seconds.

●

If necessary, use the safety switch to dis-

able the rear electric windows. Make sure

that they have been disabled.

●

The sunroof only works when the ignition is

switched on. Once the ignition has been

switched off, you can still open or close the

sunroof for a few minutes provided the driver

door and the front passenger door are not

opened.

If the window is still obstructed, the window

will stop at this point.

If there is no obvious reason why the win-

dow cannot be closed, try to close it again by

pulling the tab within ten seconds. The win-

dow closes with maximum force. The roll-

back function is now deactivated.

If more than 10 seconds pass, the window

will open fully when you operate one of the

buttons. One-touch closing is reactivated.

●

For safety reasons, you should only use

●

the remote control open and close func-

tions within about 2 metres of the vehicle.

To avoid injuries, always keep an eye on the

windows when pressing the button to close

them. The windows stop moving as soon as

the button is released.

WARNING

●

If the sunroof is used negligently or without

paying due attention, it can cause serious

injury.

Note

If the window is not able to close because it

is stiff or because of an obstruction, the

window will automatically open again

●

Open or close the sunroof and the sun

blind only when no one is in their path of

movement.

page 114. If this happens, check why the

›››

114

Opening and closing

tion after briefly pressing the button. Activat-

ing the button again stops the automatic

function.

●

Never leave any key inside the vehicle

If the sunroof does not work correctly, the

when exiting.

●

anti-trap function will not work either. Con-

tact a specialised workshop.

Never leave a child or any other person

who may need help in the vehicle, espe-

cially if they have access to the vehicle

key. If using they key unattended, they

could lock the vehicle, start the engine,

switch on the ignition and activate the sun-

roof.

Adjusting the tilt position of the sunroof

●

B

Press the rear part of the button

to the

Opening and closing the sunroof

first level.

●

Automatic function: briefly press the rear

B

part of button

to the second level.

●

After switching off, it is still possible to

open or close the sunroof during a short

space of time provided that neither the

driver nor passenger door is opened.

Closing the sunroof from a tilted position

●

A

Press the front part of the button

to the

first level.

●

Automatic function: briefly press the front

CAUTION

To prevent damage, during winter tem-

A

part of the button

to the second level.

●

peratures remove any ice or snow that

might be on the car roof before opening the

sunroof or adjusting the tilt position.

Stopping the automatic operation by ad-

justing the tilted position of the sunroof or

by closing the sunroof

Fig. 107 On the interior roof lining: sunroof but-

ton.

●

Before leaving the vehicle or in case of

The sun blind automatically opens along with

the sunroof if completely closed or if in front

of the sunroof. The sun blind remains in the

previous position and does not automatically

close with the sunroof. The sun blind can only

be closed completely once the sunroof has

been closed.

●

A

B

again.

Press button

or

rainfall, always close the sunroof. With the

sunroof open or in a tilted position, water

can enter the interior and can cause con-

siderable damage to the electrical system.

As a result, other damage can occur in the

vehicle.

Opening the sunroof

●

C

Press button

backwards to the first level.

●

Automatic function to the comfort position:

C

briefly press button

ond level.

backwards to the sec-

Note

The  button Fig. 107 has two levels. The

›››

first level switches the sunroof to the tilted po-

sition, opening or closing it fully or partially.

●

Leaves and other loose objects that ac-

Closing the sunroof

cumulate on the sunroof rails should be

regularly cleaned away either by hand or

with a vacuum.

●

D

Press button

forwards to the first level.

On the second level, the sunroof automati-

cally moves to the corresponding final posi-

●

D

Automatic function: briefly press button

»

forwards to the second level.

115

Operation

Stopping the automatic operation during

the opening or closing

the corresponding final position. Activating

the button again stops the automatic func-

tion.

Convenience function to open or

close the sunroof*

●

C

D

again.

Press button

or

Once the ignition has been switched off, you

can still open or close the sun blind for a few

minutes provided the driver door and the

front passenger door are not opened.

Opening and closing the sunshade

blind

Opening the sun blind

●

1

Press button

to the first level.

●

1

Automatic function: briefly press button

to the second level.

Fig. 109 Door handle: sensor surface.

Closing the sun blind

●

The sunroof can be opened and closed with

the convenience function, just like the win-

dows.

2

Press button

to the first level.

●

2

Automatic function: briefly press button

to the second level.

Fig. 108 On the interior roof lining: sunshade

Using the door lock*

Stopping the automatic operation during

the opening or closing

blind buttons.

●

Hold the key in the door lock of the driver

The electrical sun blind works when the igni-

tion is switched on.

door in either the unlocking or locking posi-

tion to open or close the roof in the tilted po-

sition. Release the key to interrupt this func-

tion.

●

1

2

again.

Press button

or

Note

When the sunroof is in its most tilted position,

the sun blind automatically goes into a venti-

lation position. The sun blind remains in this

position also with the sunroof closed.

When the sunroof is open, the electric sun

blind can only be closed to the front edge

of the sunroof.

Using the remote control

●

Keep the locking or unlocking button press-

1

2

have two lev-

Buttons Fig. 108

and

›››

ed to open or close the roof. If you release the

button is the opening or closing will stop.

els. The first level opens or closes the sun

blind fully or partially.

By briefly pressing the button to the second

level, the sun blind automatically moves to

116

Operation -> Opening and closing for Your Seat Ateca SUV 2020

Popular Manuals