Get Operation -> Information system Guide for Skoda Karoq SUV 2020

▶

It is possible to continue driving with due caution. Seek assistance from a

specialist garage immediately.

Information system

Driver information system

Display in the instrument cluster

 Service

 Read and observe on page 42 first.

 lights up – information regarding a service appointment that is due

» page 56 , Displaying the distance and days until the next service interval.

Fig. 37

Display overview

Depending on the vehicle's equipment, the information system uses the dis-

play in the instrument cluster to provide the following information » Fig. 37.

Time / symbols of the Infotainment voice control

Engaged gear / gear recommendation

Selector lever positions for the automatic gearbox

START STOP system indicator lights

Compass display

Detected traffic signs

Driving data (multifunction display)

Warning lights

Information messages

Door alarm

Eco tips

Service interval display

Outside temperature

Cruise control / speed limiter

Total distance travelled

Distance travelled by resetting the memory (trip)

Door, luggage compartment and bonnet alarm

When the door or luggage compartment / bonnet is open, a graphic warning

appears in the display.



Operation

An acoustic signal will also sound if you drive the vehicle above 6 km/h when a

door is open.

A suitable engaged gear or, where appropriate, a recommended gear is dis-

played, with the aim of conserving the life of the engine and increasing driving

efficiency.

Reset counter for distance travelled (trip)

The counter can be reset by tapping button

Display » Fig. 39

» Fig. 38 on page 51 or Info-



tainment in the

/  →  → Instrument cluster menu.



Optimal gear engaged



Gear recommendation (e.g.    means that it is advantageous to switch

Setting the time

from 3rd to 4th gear)

For vehicles with automatic transmission the recommended gear will be

shown provided the mode for manual switching (Tiptronic) is selected.

Fig. 38

Button in the instrument cluster

WARNING

The driver is always responsible for selecting the correct gear in different

driving situations, such as overtaking.

Vehicle condition

Fig. 40

Vehicle condition



The time can be set in Infotainment in the

with the button in the instrument cluster.

→  → time and date menu or

Set the time using the button in the instrument cluster

Switch on the ignition.

Press and hold the button » Fig. 38until thetime is shown in the display.

›

Release the button

and the system switches to the hour setting function.

again and set the hours.

Wait 4 seconds, the system switches to the minutes setting.

Press the button

again and set the minutes.

Certain functions and conditions of individual vehicle systems are checked

continuously when the ignition is switched on. If there is a fault in the system,

the following message will appear in the display of the instrument cluster.

Wait 4 seconds, the system switches to the initial setting.

Gear recommendation

While the operational faults remain unrectified, the messages are always indi-

cated again. After the message is displayed for the first time, the warning

lights  (danger) or  (warning) continue to be displayed.

Fig. 39

Information on the selected

gear / Gear recommendation



The vehicle condition can be displayed in Infotainment in the menu

/  →

 → Vehicle status

In the screen, information regarding vehicle condition or function of the tyre

pressure monitor is displayed.



Using the function surfaces  select the menu item Vehicle status.

›

Information system

Function surfaces and screen display » Fig. 40

Operation using the multifunctional steering wheel

Vehicle representation (the zones of the vehicle are shown in different

colours, corresponding to any warning messages that occur. The warn-

ing messages are displayed once you touch the “vehicle”)

 No message/warning messages relating to vehicle status and the num-

ber (if there is only one message, one warning message text is dis-

played)



Display information about the status of the START-STOP system

 Activation / deactivation of notes relating to START-STOP-Sys-

tem messages in another screen display

Fig. 42 Buttons/dials on the multifunction steering wheel

Operation of the information system

Operation using the control lever

Buttons/dials on the multifunction steering wheel



Switch on/off voice control

Turn - sets the volume

Press - sound on / off

Skip to next track/station

Fig. 41

Buttons on the operating lever





Switch to previous track/station

Display the assistance systems menu

Press - the Telephone menu, accept/end the call; call selected contact

Hold - repeat last call; reject call





Operating the multifunction display

Turn - select data / set values

Press - display / confirm indication

Operating the multifunction display

Press (up or down) - select data / set values

Press - display / confirm indication

Operation of the display menus



Hold - display main menu

Press - return to a previous level in the menu

Turn - move in the selected menu

Press - confirm selected menu item

Operation of the display menus

Press (up or down) - move to the selected menu

Hold (up or down) - display main menu

Press - confirm selected menu item

Driving data (Multifunction display)

 Introduction



The driving data display is only possible with the ignition switched on.

Operation



The units can be adjusted in Infotainment in the menu

/  →  → Units

Driving time - driving time since the last time the memory was deleted.



The journey data can be set/reset in Infotainment in the menu

/  →  →

Conv. consumers - information about the total consumption of the comfort

consumers in l/h and a list of three consumers (e.g. air conditioning etc.), which

have the largest share of fuel consumption.

Instrument cluster

Note

The setting of the information display is stored in the active user account per-

sonalisation » page 56.

Infotainment display

Fig. 43

Driving data

Information Overview

Overview of driving data (depending on the vehicle equipment).

Range - drive distance in km which can be covered with the existing tank ca-

pacity and with the same driving style. If you drive more efficiently this value

can increase.

AdBlue^®range - drive distance in km which can be covered with the existing

AdBlue^®tank capacity and with the same driving style. If you drive more effi-

ciently this value can increase.



In the Infotainment system, in menu

/  tap on function surface  →

›

Driving data

Average fuel consumption - is calculated continuously since the last time the

memory was deleted. After erasing the memory, no data will appear for the

first 100 m driven.

Screen display » Fig. 43

Distance travelled

Driving time

Average speed

Current fuel consumption - when the vehicle is stationary or slowly moving,

the fuel consumption is displayed in l/h (--,- km/l appears on models for some

countries).

Average fuel consumption

Oil temperature - if the temperature is lower than 50 °C or if there is a fault in

the system for checking the oil temperature, the  symbols are displayed.

Transit point rating (DriveGreenFunction)

Graphic fuel level display (if the estimated range is less than 300 km, the

vehicle starts to approach the symbol )

Approximate range

Warning when the preset speed is exceeded - allows the setting of a speed

limit where, if exceeded, an acoustic warning signal and a warning message ap-

pears on the display of the instrument cluster.

Use the function surfaces   to select one of the following presets.

^▶Since start - Driving data for the individual trip

^▶Long-term - Long-term driving data

Dynamic Road Sign Display - traffic signs display » page 246, Traffic sign rec-

ognition.

^▶Since refuel - Data since refuelling

Current speed - digital speedometer.

Average speed - is calculated continuously since the last time the memory

was deleted. After erasing the memory, no data will appear for the first 300 m

driven.

Warning when exceeding the set speed

The system offers the possibility to set a speed limit beyond which an acoustic

warning signal will sound and the following warning message appears in the

display of the instrument cluster.

Driving route - distance driven since the last time the memory was deleted.



Information system

Adjust the speed limit while the vehicle is stationary

Long-term

Select the menu item Warning at and confirm.

Set the desired speed limit is 5 km/h steps.

Confirm the set value, or wait several seconds; your settings will be saved

automatically.

The memory gathers driving data from any number of individual journeys up to

a total of 99 hours and 59 minutes driving time or 9999 kilometres driven.

›

The indicator is automatically set back to zero if one of the indicated values is

exceeded.

Adjusting the speed limit while the vehicle is moving

Since refuel

Select the menu item Warning at and confirm.

Drive at the desired speed.

Confirm the current speed as the speed limit.

›

The driving data is stored in the memory since the last fuel refuelling.

›

The memory is erased automatically the next time you fill up.

›

For the Storage choice, repeatedly confirm the selected indication and se-

lect the desired memory.

›

The set speed limit can be manually adjusted later if needed.

Reset the speed limit

For Deleting the memory for the selected information, hold down the but-

ton confirming the specification.

›

Select the menu item Warning at and confirm.

By confirming the stored value, the speed limit is reset.

›

The following driving data are stored.

The speed limit set mode is stored even after the ignition is switched off and

on. After a gap between driving exceeding 2 hours, the pre-set speed limit is

deactivated.

▶

Average fuel consumption

Distance travelled

Average speed

Driving time

▶

Memory

Note

Disconnecting the vehicle battery will delete all memory data.

Fig. 44

Memory display

Menus in the display of the instrument cluster

 Introduction

The instrument cluster display is a user interface which, depending on the

equipment configuration, provides information about the Infotainment, the

multifunction display, the assistance systems etc.

The system saves the data in the three memories described below which are

The menus with details can be operated and displayed using the buttons on

the operating lever or the multifunction steering wheel » page 52.

displayed at the position » Fig. 44.

Since start

Main menu items (depending on vehicle equipment)

In the memory, driving data is saved for the time between switching on and

switching off the ignition. New data will also flow into the calculation of the

current driving information if the trip is continued within 2 hours after switch-

ing off the ignition.

■

Driving data » page 52

Assist systems » page 55

Navigation » page 55

Audio » page 55

Telephone » page 55;

Vehicle » page 51

■

If the trip is interrupted for more than 2 hours, the memory is automatically

erased.

■



■

Operation



A telephone connected to the Infotainment system

Note

■



Missed calls (if there are several missed calls, the number of calls is shown

next to the symbol)

Switch-off microphone

If warning messages are displayed, these messages must first be confirmed

to access the main menu.

■

The display language can also be set in Infotainment » page 134, Setting the



Infotainment language and» page 141, Setting the Infotainment language.

Apple CarPlay

An external device connected to the Infotainment system via Apple CarPlay

can be operated via the multifunction steering wheel as well as via menus in

the instrument cluster display.

Navigation menu item

The following information is displayed in the Navigation menu item.

▶

The following symbols are displayed in the Telephone menu option.

Driving recommendations

Compass

Last destinations

Navigation map (applies to digital instrument cluster)

▶



Answer the incoming call

▶



Reject incoming call / end call

▶

 Activate / deactivate microphone (applies for the infotainment Swing)

audio menu item

Assist systems menu item

E.g. the following information is displayed in the Audio menu item.

The following systems are activated/deactivated in the Assist systems menu

item.

Radio

▶

Currently playing station (name/frequency).

The selected frequency range (e.g. FM) optionally with the number of the

▶

Lane Assist

Assist system for blind spot monitoring

Rear Traffic Alert

▶

station button (e.g. FM3), if the station is stored in the memory list.

List of available stations (if more than 5 stations can be received).

TP traffic announcements.

▶

Front Assist

▶

Media

Service intervals

▶

Name of the track being played, if necessary, further information regarding

title (e.g. artist, album name), if this information is stored as a so called ID3

tag on the audio source.

 Introduction

Compliance with the service intervals is of crucial importance for the serv-

ice life and value retention of the vehicle. Never exceed the service date.

Telephone menu item

The specialist garage will inform you about the type of service interval, the op-

tion to change it, and the service scope.

The call list with the following symbols is displayed in the Telephone menu item.







Incoming call

Outgoing call

Missed call

The service interval display in the display of the instrument cluster will notify

you when a service is due.

Proof of service

Symbols in the display

A specialist garage will confirm the corresponding service record in the service

information system called Digital Service Plan.



Telephone battery charge (this function is only supported by some mobile

phones)



 Signal strength (this function is only supported by some mobile phones)

We recommend that you always print out the respective service record.

Information system

Note

Reset service interval display

The customer is responsible for covering the cost of all services including

changing or replenishing the oil, even during the warranty period, unless stated

otherwise in the ŠKODA AUTO warranty terms or other binding agreements.

Have the display reset by a specialist garage.

We recommend that you do not reset the service interval display yourself. In-

correctly setting the service interval display can cause problems to the vehicle.

Displaying the distance and days until the next service interval

Variable service interval

For vehicles with variable service intervals, after resetting the oil change serv-

ice display in a specialist garage, the values of the new service interval are dis-

played, which are based on the previous operating conditions of the vehicle.

Fig. 45

Button in the instrument cluster

These values are then continuously matched according to the actual operating

conditions of the vehicle.

Personalization

 Introduction

The details regarding the remaining kilometres or days until the next scheduled



service can be displayed in Infotainment in the menu

with the button in the instrument cluster.

/  →  → Service or

Thanks to the personalisation, more drivers have the opportunity to use a vehi-

cle with individually set system functions by means of a user account which is

assigned to the respective vehicle key.

Use the key to display

Switch on the ignition.

Press and hold the button

the display.

›

WARNING

» Fig. 45 until theService menu item is shown in

›

Make all adjustments when the vehicle is stationary - otherwise there is the

risk of accident!

Release the button

›

In the display, the symbol  appears for 4 seconds along with the following

message for the kilometres or days to the next service appointment.

Service messages

Before the next service date has been reached, the symbol  as well as a

message about the mileage or days until the next service event appears in the

display after the ignition is switched on.

Once the service interval is reached, the symbol  appears in the display after

the ignition is switched on, together with the message.

Operation

The seat adjustment can be terminated as follows.

Operating principle

▶

By tapping on the function surface Cancel on the Infotainment screen.

By pressing any key on the seat » page 84.

▶

Fig. 46

Switch to a different user account

Note

Vehicles with the personalisation function are provided with three vehicle

keys.

Overview of some personalized functions

 Read and observe on page 56 first.

▶

Driving mode - the last selected mode, mode setting Individual

Setting the electrically adjustable driver's seat.

Exterior mirror adjustment.

Assistance systems - Lane Assist, parking aid (Park Pilot).

Light - ambient lighting, convenience turn signal, COMING HOME / LEAVING

HOME.

Climatronic - temperature in each individual area, fan speed, recirculation

mode.

Infotainment settings - brightness level of the screen, keyboard arrange-

ment.

Radio - sound settings, station sorting.

Media - shuffle / repeat title, selected video format.

Voice control - acoustic signals.

Navigation - home address, alternative routes, recommended route, reminder

of the lack of fuel.

 Read and observe on page 56 first.

▶

After unlocking the vehicle and opening the driver's door, all the personalised

functions are adjusted according to the user account that is assigned to the

key which was used to unlock the vehicle.

▶

Any change to the set personalised functions is automatically stored in the ac-

tive user account.

▶

As part of the personalisation, three default user accounts as well as a

Guestaccount are provided.

▶

Switch to a different user account

You can switch to a different user account in the instrument cluster display

» Fig. 46 within 10 seconds after turning on the ignition.

▶



An account can be changed at a later time in Infotainment in the menu

/ 

→  →Vehicle status →  (if the Tyre Pressure Monitoring System is displayed first of

all, then use the arrow  or  switch to Vehicle status).

Note

The scope of the personalisation functions is dependent on the type of Info-

tainment package.

If an account is selected in which not all of the points required by the system

are set, a configuration wizard can be automatically displayed on the Infotain-

ment screen » page 129.

Setting the personalization

Electrically adjustable driver's seat (referred to only as seat in the

following)

 Read and observe on page 56 first.

The seated position adjustment is carried out in the following cases.

After unlocking the vehicle and opening the driver's door (in this case before



In the Infotainment system, in menu

/  tap on function surface  → Per-

›

▶

sonalisation

the vehicle was locked), an account with a certain seat setting was selected.

After vehicle unlocking, an account is activated to which a different seat set-

ting is assigned).



The following menu items are displayed.

▶

After switching to a different user account and at a speed less than 5 km/h.

Information system

Personalisation

Active - activate/deactivate the personalisation

Unlocking and opening

Unlocking and locking

 Introduction

Select a user account

A list of user accounts with the option to manage user accounts and to switch

to another account.

■

 - Account management with the following options:

Rename user account - rename the user account (not applicable to the Guest

The vehicle is equipped with a central locking system which makes it possible

to unlock / lock all the doors, the fuel filler flap and boot lid simultaneously.

■

account)

■

The door unlocking can be adjusted individually » page 61.

Copy settings to another account - copy the settings of an active user account

to another user account

Reset user account - reset the selected user account to factory settings

The unlocking of the vehicle is displayed by the turn signal lights flashing

twice.

■

Settings

If you unlock the vehicle and do not open a door or the boot lid within the next

45 seconds, the vehicle will lock again automatically.

■

Key assignment:: options for assigning the vehicle key to the user account:

■

Manual - detected vehicle key must be assigned to the active user account

The locking of the vehicle is displayed by the turn signal lights flashing once.

manually

■

Automatic - detected vehicle key automatically assigned to a different ac-

If the driver's door has been opened, the vehicle cannot be locked.

count of the active user account

Assign vehicle key to current user account - manual assignment of the detected ve-

If the doors or the boot lid remain open after the vehicle has been locked, the

turn signal lights do not flash until they have been closed.

■

hicle key to the active user account - follow the instructions on the Infotain-

ment screen

WARNING

■

Reset all - reset the personalisation and the user accounts to factory settings

■

Never leave the key in the vehicle when you exit the vehicle. Unauthorized

persons (e.g. children) could lock the car, turn on the ignition or start the

engine - there is a danger of injury and accidents!

■

When leaving the vehicle, never leave people who are not completely in-

dependent, such as children, unattended in the vehicle. These individuals

might not be able to leave the vehicle on their own or to help themselves.

Can be fatal at very high or very low temperatures!

CAUTION

■

Each key contains electronic components; therefore it must be protected

against moisture and severe shocks.

■

Keep the keyway clean. Impurities (textile fibres, dust etc.) have a negative

effect on the functionality of the locking cylinder and ignition lock.

Operation

Operation -> Information system for Your Skoda Karoq SUV 2020

Popular Manuals