Get Driver assist systems Guide for Skoda Kodiaq SUV 2020

Driver assist systems › Braking and stabilising systems 177

Multi-Collision Brake (MCB)

Driver assist systems

MCB helps to decelerate and stabilize the vehicle af-

ter a collision with an obstacle. This reduces the risk

of further collisions.

Braking and stabilising systems

Overview

Functional conditions

✓ There has been a frontal, side and rear collision of

a certain severity.

✓ The impact speed was greater than 10 km/h.

Stabilisation control (ESC)

ESC helps to stabilize the vehicle in borderline situa-

tions (e.g. when the vehicle starts to skid). ESC

brakes the individual wheels to maintain the direc-

tion of travel.

✓ The brakes, ESC and other necessary systems re-

mained functional after the impact.

✓ The accelerator pedal is not pressed.

ﬂashes - ESC is engaged

Trailer Stability Assist (TSA)

TSA helps to stabilize the trailer. When the trailer

starts to wobble, TSA stabilizes the trailer by braking

the individual vehicle wheels.

ESC Sport

ESC Sport allows for a sportier driving style.

lit up - ESC Sport is activated

Functional conditions

✓ The trailer hitch was delivered from the factory

or purchased from the ŠKODA Original accesso-

ries.

✓ The trailer is connected to the trailer socket.

✓ ASR activated.

Traction control (TCS)

ASR helps to stabilize the vehicle when accelerating

or driving on low-grip roads. ASR reduces the drive

power transmitted to the wheels when the wheels

spin.

✓ The driving speed is higher than 60 km/h.

ﬂashes - ASR is engaged

Settings

Antilock braking system (ABS)

ABS helps maintain control of the vehicle during

emergency braking. An ABS intervention is noticea-

ble by pulsating movements of the brake pedal.

Deactivate / activate ASR

Press the button.

›

Or:

Motor Slip Regulation (MSR)

In Infotainment, select the following menu.

›

MSR helps to maintain control of the vehicle in the

event of a sudden reduction in speed, e.g. on icy

roads. If the drive wheels lock, MSR increases the

engine speed. This reduces the braking eﬀect of the

engine and the wheels can rotate freely again.

Or:

When deactivated lights up in the instrument clus-

ter.

Electronic diﬀerential lock (EDS)

EDL helps to stabilize the vehicle when driving on

road surfaces with diﬀerent grip under the individual

wheels. EDL brakes a spinning wheel and transmits

power to a diﬀerent drive wheel.

goes out on renewed activation.

Deactivating the ASR may be helpful in the following

situations.

Electronic diﬀerential lock (XDS+)

XDL + helps to stabilize the vehicle during fast cor-

nering by braking the inside wheel of the driven axle.

Driving with snow chains.

Driving in deep snow or on very loose ground.

Starting the stuck vehicle.

▶

Active steering support (DSR)

Activate/deactivate ESC Sport

In diﬃcult situations, the DSR provides the driver

with a steering recommendation in order to stabilise

the vehicle.

Hold the button down.

›

Or:

In Infotainment, select the following menu.

›

Hill start assist

Hill Hold Control helps when starting oﬀ on uphill

gradients by braking the vehicle for about 2 seconds

after the brake pedal is released.

Or:

Functional conditions

✓ The gradient is at least 5%.

✓ The driver's door is closed.

When activated, lights up in the instrument clus-

ter.

178 Driver assist systems › Front Assist

goes out when deactivated.

Operating conditions

✓ ASR activated.

Troubleshooting

✓ The driving speed is higher than 5 km/h.

ESC or ASR faulty/deactivated by the system

illuminates

Functional restriction

Stop the engine and start again.

If the warning light does not go out after covering

a short distance, seek the help of a specialist ga-

rage.

›

The function may be restricted or unavailable in the

following cases.

›

About 30 seconds after starting. Lights up in the

▶

instrument cluster

ABS faulty

When driving through a sharp bend.

During an ESC intervention.

▶

illuminates

You may continue driving, exercising appro-

priate caution. Get the help of a specialist compa-

ny.

›

Settings

Automatic activation

Front Assist is automatically activated when the igni-

tion is switched on.

Brake system and anti-lock braking system faulty

illuminates together with

Stop driving! Get the help of a specialist

company.

›

Activation / deactivation in the instrument cluster

Press the button on the multifunction steering

wheel.

›

Select Front Assist

›

Front Assist

Functionality

Activation / deactivation and setting in Infotain-

ment

In the menu:

Front Assist monitors the distance to the vehicle

ahead and points out when the safety distance is ex-

ceeded. In borderline situations, it helps to avoid a

collision by braking interventions.

Show system deactivation in the display of the in-

strument cluster

illuminates together with

Status display in the instrument cluster display

illuminates - safety distance too small

illuminates together with

illuminates - warning in case of collision

Deactivate Front Assist when handling the vehi-

cle on a truck, a car ferry etc.

Automatic braking in the event of a collision

If there is a risk of collision, the symbol lights up as a

warning

from the isolation box. If you do

Troubleshooting

not respond to the warning, the vehicle will slow

down.

Front Assist is not available

At a driving speed of up to 30 km / h, the vehicle is

braked without prior warning.

illuminates together with

The automatic braking can be stopped by pressing

the accelerator pedal or by steering.

Or:

illuminates together with

With automatic braking, the pressure in the brake

system increases. The brake pedal cannot be operat-

ed by using the pedal as normal.

Clean the front radar sensor.

Stop the engine and start again.

If Front Assist is still unavailable, check the brake

lights on the vehicle or on the attached trailer.

›

WARNING

Risk of accident!

›

Front Assist does not respond to crossing or oncom-

ing vehicles.

Replace the defective bulb.

If the brake lights are working and Front Assist is

still unavailable, seek the help of a specialist ga-

rage.

›

Driver assist systems › Pedestrian detection system 179

There was an unfounded warning or system inter-

vention

Operation

Variant without GRA

Clean the front radar sensor.

If the system is not working properly, disable Front

›

Assist and seek the help of a specialist garage.

Pedestrian detection system

Functionality

Pedestrian detection helps to avoid a collision with

crossing pedestrians using automatic brake interven-

tion.

Activate limiter (control inactive)

Deactivate limiter

Status display in the instrument cluster display

lights up - Danger of collision

Interrupt control (sprung position)

Resume control¹⁾/ Increase limit

Risk of collision in a speed range of 5-30 km/h

The system triggers automatic braking.

Start control at the current speed / reduce

Risk of collision in a speed range of 30-60 km/h

The system warns of a collision hazard ﬁrst. If the

driver does not respond, the vehicle is automatically

braked.

limit

Variant with cruise control

Functional conditions

✓ Front Assist activated.

✓ Driving speed between 5-60 km/h.

Speed limiter

Functionality

Activate GRA (condition for the subsequent

activation of the limiter)

The speed limiter controls the maximum driving

speed according to the set speed limit.

To activate the speed limiter, press the D but-

ton and the menu item Speed limit in the instrument

cluster.

If the limit is exceeded when driving downhill, brake

the vehicle with the brake pedal.

Deactivate limiter

Status display in the instrument cluster display

Interrupt control (sprung position)

Resume control¹⁾/ Increase limit

illuminates - the cruise control is activated.

When the control starts,

set limit is displayed.

is highlighted and the

Start control at the current speed / reduce

limit

illuminates - cruise control is active

ﬂashing - the set limit is exceeded

Show menu of assistance systems - Possibility

to switch between GRA and speed limiter

Switching to cruise control interrupts the con-

trol.

Operating conditions

Adjust the speed limit using the B and C keys

Press for increments of 1 km/h.

✓ The driving speed is higher than 30 km/h.

Hold for increments of 10 km/h.

If no speed limit is set, the current speed is set as the speed limit.

180 Driver assist systems › Cruise control system

Variant with ACC

WARNING

Risk of the cruise control system starting uninten-

tionally!

Deactivate cruise control after use.

▶

Status display in the instrument cluster display

illuminated - the cruise control system is acti-

vated

illuminated - cruise control is active

When cruise control starts, the set speed is

displayed.

Operating conditions

✓ The driving speed is higher than 20 km/h.

Activate ACC (condition for the subsequent

activation of the limiter). To activate the limit-

er, press the button on the multifunction

steering wheel and the menu item in the in-

strument cluster Speed limit in the instrument

cluster.

Operation

Resume control¹⁾/ Increase limit in incre-

ments of 1 km / h (sprung position)

Interrupt control (sprung position)

Deactivate limiter

Increase limit in steps of 10 km/h

Decrease limit in steps of 10 km/h

Start control/Reduce limit in steps of 1 km/h

Activate GRA (cruise control inactive)

Disable GRA

Interrupt control (sprung position)

Resume cruise control²⁾/ Increase speed

Exceeding the limit

Disengage the accelerator pedal completely.

›

Start control at the current speed / reduce

Control will continue as soon as the vehicle has de-

celerated to below the set limit.

speed

Show menu of assistance systems - Possibility

to switch between GRA and speed limiter

Troubleshooting

Accelerate temporarily

Speed limiter faulty

Depress the accelerator pedal.

›

illuminates

Releasing the accelerator pedal will cause the speed

to drop again to the set speed.

Get the help of a specialist company.

›

Interrupt speed control

After pressing the brake pedal.

After an ESC intervention.

▶

Cruise control system

Functionality

▶

The cruise control system (GRA) maintains the set

speed without having to press the accelerator pedal.

Troubleshooting

Cruise control system faulty

This, however, is only possible to the extent permit-

ted by the engine output and braking power of the

vehicle.

illuminates

Get the help of a specialist company.

›

If no speed limit is set, the current speed is set as the speed limit.

If no speed is set, the current speed is adopted.

Driver assist systems › Adaptive Cruise Control (ACC) 181

illuminates - ACC controls the driving speed ac-

cording to the permissible speed

Adaptive Cruise Control (ACC)

Functionality

illuminates - ACC controls the driving speed ac-

cording to the road

illuminates - ACC does not decelerate suﬃ-

ciently

Control

ACC maintains the set speed. When your vehicle ap-

proaches the vehicle in front, ACC will automatically

start to maintain the set distance to this vehicle.

Depress the brake pedal.

›

Maintaining the set speed and the distance will here-

inafter be referred to as Control.

Operation

Operating with the lever

WARNING

ACC does not respond to stationary objects or to

crossing or oncoming objects.

ACC is intended primarily for use on motorways.

Speed range

Depending on the equipment, ACC allows a speed

setting in the range of 30-160 or 30-210 km/h.

If control is started at a speed of less than 30 km/h

on vehicles with an automatic transmission, the

speed is automatically increased to 30 km/h or con-

trolled according to the speed of the vehicle ahead.

Distance level

The distance to the vehicle ahead can be adjusted to

ﬁve diﬀerent levels.

WARNING

Activate ACC (control inactive)

Maintain a minimum distance in accordance with

the country-speciﬁc legal regulations.

▶

Start or resume control/Increase speed in

steps of 1 km/h (sprung position)

Automatic stopping and starting with automatic

transmission

A vehicle with an automatic transmission can be de-

celerated to a stop using the ACC and start moving

again. Control is disconnected in case of longer hold-

ing periods.

Stop control (sprung position)

Deactivate ACC

Increase speed in steps of 10 km/h

Reduce speed in steps of 10 km/h

Set distance level

To resume control:

Start control/Reduce speed in steps of 1

km/h

Depress the accelerator pedal.

›

Or:

Starting control with the current speed

Set the lever to position

›

Control is interrupted when the brake pedal is de-

pressed.

Or:

If no speed is saved, move the lever to the sprung

›

Overtaking

position

If your vehicle changes to the fast lane and no vehi-

cle is detected in front, ACC accelerates up to the

set speed.

Set distance level

Move the

switch to the sprung position

›

Status display in the instrument cluster display

illuminates - ACC is activated

illuminates - Control is active

When the control starts, the set speed is displayed.

182 Driver assist systems › Adaptive Cruise Control (ACC)

Narrow or staggered vehicle

Line A , appears on the

display, indicating the

change in distance.

Use the

to set the desired dis-

tance level.

switch

›

For temporary acceleration

Depress the accelerator pedal.

›

ACC detects a narrow or staggered vehicle only

when it is in the area covered by the radar.

The vehicle accelerates and control is temporarily in-

terrupted. Upon releasing the accelerator, control is

resumed.

Lane change by another vehicle

Interrupting cruise control

After pressing the brake pedal.

By operating the clutch pedal for a long time.

After an ESC intervention.

▶

After deactivation of the ASR.

Resuming control

If a speed is stored, move the lever to the sprung

›

position

The vehicle is controlled at the set speed. The set

speed is shown in the instrument cluster display.

A vehicle that changes to the lane a short distance

away may not be recognized by the ACC in time.

Stationary vehicle

Function restriction

WARNING

Be particularly attentive and alert in the following

▶

situations.

Regulation according to the vehicle in the adjacent

lane

If your vehicle is moving faster than the vehicle in

the next lane on the driver's side, at a speed of more

than 80 km/h, this may cause your vehicle to be con-

trolled according to that vehicle.

If a vehicle in front turns and there is a stationary ve-

hicle in front of this vehicle, the ACC will not respond

to the stationary vehicle.

When cornering

Vehicles with special load or special bodies

A load or superstructure that protrudes outside the

vehicle might not be detected by the ACC.

Settings

In Infotainment, in the following menu.

◼

When cornering, a vehicle in the next lane may enter

the detected area. Your vehicle will be controlled ac-

cording to this vehicle.

▶

Driving programme: - Setting the vehicle acceleration

when the ACC is switched on (this setting is

Driver assist systems › Lane Assist 183

made for vehicles with driving mode selec-

tion » page 171)

Last distance selected Switching on/oﬀ the last distance

range selected

Distance: - Setting the distance to vehicles in front

Road layout preview - Switching cruise control on/oﬀ

according to the road proﬁle (e.g. reducing speed

before a bend)

Speed limit preview - Switching the cruise control

on/oﬀ according to the permissible speed

lights up - System intervenes

▶

Display

Display example in the black and white display.

▶

Lane limitation highligh-

ted on the right: system

intervenes on the right

when approaching the

lane marking.

▶

The lines are highlighted

in colour on the coloured

display.

Troubleshooting

ACC not available

illuminates together with

Warning through steering wheel vibrations

The steering wheel vibrations are triggered in the

following situations.

The vehicle crosses the boundary line without the

ﬂashing light switched on.

▶

illuminates together with

The system is unable to keep the vehicle in the

lane.

▶

Stop the engine and start again.

If ACC is still unavailable, check the brake lights on

the vehicle or on the attached trailer.

Replace the defective bulb.

If the brake lights are working and ACC is still un-

available, seek the help of a specialist garage.

›

Correct the steering movement in the event of vi-

brations.

›

Functional conditions

✓ The driving speed is higher than 65 km/h.

✓ The lane markings are clearly visible.

Lane Assist

Usage

Functional restriction

Lane Assist helps to keep the vehicle in the lane. It is

based on the boundaries of a lane. These can include

boundary lines, road edges or objects such as curbs

and possibly traﬃc cones.

The system function may be restricted in the follow-

ing cases.

The ﬁeld of view of the sensor is limited by a dirty

screen or an obstacle or a preceding vehicle.

In the event of unfavourable weather conditions.

When driving through a sharp bend.

When driving on a steep road or in ruts.

When the driving lane is too narrow.

▶

The system is intended primarily for use on high-

ways.

▶

Functionality

As the vehicle approaches a lane marking, the sys-

tem executes a steering movement in the opposite

direction from the lane marking. The steering inter-

vention can be overridden manually.

When driving through construction sites.

WARNING

Risk of incorrect steering intervention!

Certain objects or markings on the roadway can be

incorrectly recognized as boundary lines.

No system intervention occurs when changing lane

with the turn signal on.

Always keep your hands on the steering wheel and

be prepared to override the steering intervention.

▶

Status display in the instrument cluster display

lights up - System is activated and ready to

intervene

Settings

lights up - System is activated and ready to

intervene

Activation / deactivation in the instrument cluster

lights up - System intervenes

Press the button on the multifunction steering

wheel.

›

Select Lane Assist

›

184 Driver assist systems › Travel Assist

Setting in Infotainment

In the menu:

The function may be restricted or unavailable in the

following cases.

The ﬁeld of view of the sensor is limited by a dirty

▶

screen or an obstacle or a preceding vehicle.

In the event of unfavourable weather conditions.

When driving through a sharp bend.

When driving on a steep road or in ruts.

When the driving lane is too narrow.

Troubleshooting

▶

Message regarding system unavailability

Clean the windscreen in the sensor area.

Stop the engine and restart again after a short

time.

›

In addition to these restrictions, also observe the

ACC restrictions » page 182 .

If the system is still not available, seek the help of a

specialist garage.

›

WARNING

Risk of incorrect steering intervention!

Certain objects or markings on the roadway can be

incorrectly recognized as boundary lines.

Travel Assist

Usage

Always keep your hands on the steering wheel and

be prepared to override the steering intervention.

▶

Travel Assist helps to keep the vehicle within the

lane while controlling the speed of the vehicle.

Settings

Functionality

Activation

Press

wheel.

the button on the multifunction steering

›

Travel Assist uses the functions Lane Assist and

ACC.

Regulation with the current speed and adaptive lane

guidance are started.

WARNING

Risk of accident!

Deactivation

Depress the brake pedal.

Always keep your hands on the steering wheel and

be ready to take over the steering.

▶

›

The notes in the functional description of Lane As-

sist and ACC must be observed.

▶

Or:

Put the ACC lever into position

» page 181 .

›

Adaptive lane guidance

This function keeps the driver within the selected

position within the lane.

Additional settings are identical to ACC and Lane

Assist.

Status display in the instrument cluster display

is lit up – the system is activated, cruise con-

trol and adaptive lane guidance are active

Troubleshooting

Message regarding system unavailability

is lit up – the system is activated, cruise con-

trol is active

The problem solving instructions for Lane As-

sist » page 184 and ACC » page 183 are as follows.

›

is lit up – the system is activated, adaptive

lane guidance is active

If the system is still not available, seek the help of a

specialist garage.

›

Functional conditions

Lane change assist system Side Assist

Usage

✓ ACC is enabled.

✓ The max. driving speed is 210 km / h.

✓ The lane markings are clearly visible.

✓ In vehicles with manual transmission, the driving

The system uses optical signals in the exterior mirror

to alert the driver to vehicles that could be danger-

ous when changing lanes.

speed is greater than 30 km / h.

Functionality

Functional restriction

The system monitors the area next to and behind the

vehicle.

Travel Assist is only for support and does not relieve

you of the responsibility for driving.

Driver assist systems › Traﬃc sign recognition 185

The system warns of an approaching vehicle through

the warning light in the exterior mirror cover on

the side of the vehicle where the vehicle is recog-

nized.

The system can draw attention to objects along the

road, such as high guard rails or noise barriers.

In the following cases, the system does not have to

issue a warning of another vehicle, or the warning

may be issued incorrectly.

Driving situations in which a system warning is

given

Unfavourable weather conditions.

A very fast approaching vehicle.

When going round a sharp bend or a roundabout.

▶

Settings

In the instrument cluster display

The system settings are made in the display of the

instrument cluster in menu item Assistants

In Infotainment

The system settings are made in the infotainment

system in the following menu.

Your vehicle will be overtaken by vehicle

The fast-

er the vehicle A approaches, the earlier the warning

light comes on.

Vehicle B is overtaken by your vehicle at a speed

that is faster by max. 10 km/h. If the speed is higher

during the overtaking process, no warning will be

provided by the indicator light.

Troubleshooting

Message regarding system unavailability

Stop the engine and start again.

If the system is still not available, seek the help of a

specialist garage.

›

Indicator light

illuminates - there is another vehicle behind your

vehicle

ﬂashes - there is another vehicle behind your ve-

hicle, and the turn signal on the same side is switch-

ed on

Traﬃc sign recognition

Usage

For vehicles with Lane Assist The indicator light

ﬂashes even if your vehicle crosses the boundary line

in the direction of the approaching vehicle. The sys-

tem will trigger a steering wheel vibration in this

case.

The road sign recognition shows road signs in the

display of the instrument cluster. This also indicates

exceeding the speed limit.

For this, Lane Assist must be activated and the boun-

dary line between the vehicles recognized.

Functionality

Displayed traﬃc signs

Speed limits.

No overtaking.

Driving bans - one-way traﬃc.

Additional characters, e.g. speed limit in wet condi-

tions.

▶

Operating conditions

✓ The driving speed is higher than 15 km/h.

✓ No accessories are connected to the trailer sock-

et.

WARNING

Road signs on the road always have priority over the

road signs shown on the display.

Function restriction

The system cannot detect lane width. For this rea-

son, it may, for example, draw attention to a vehicle

in a distant lane in the following cases.

Driving with a trailer

If a trailer or other accessories are connected to the

trailer socket, trailer-relevant traﬃc signs are also

displayed.

Driving on a road with narrow lanes or on the lane

edge.

▶

Driving on roads with no speed limits

If you are on a road without speed limits, the traﬃc

sign will appear on the display

Driving round bends.

▶

186 Driver assist systems › Crew Protect Assist proactive occupant protection

▶

Example of road sign display

Top speed for trailers - Set the maximum speed for trail-

er operation

Crew Protect Assist proactive occupant

protection

Example of additional characters

Usage

Example of several traﬃc signs recog-

nized at the same time.

The system for proactive passenger protection trig-

gers measures to protect passengers in the vehicle

in dangerous situations.

Speed units

The speed information in the displayed traﬃc signs

refer to the country-speciﬁc speed units.

Functionality

If the system assesses the situation as critical, it trig-

gers the following security measures.

For example, the displays refer to 30 km / h or 30

mph, depending on the country.

Open windows are closed except for a small gap.

The sliding/tilting roof is closed.

The front seat belts are tightened on the body.

▶

Restriction

The system function may be restricted in the follow-

ing cases.

The system reaction depends on the selected

driving mode.

The sensor is blinded by the sun or oncoming traf-

ﬁc.

The ﬁeld of view of the sensor is limited by an ob-

stacle or a preceding vehicle.

In the event of unfavourable weather conditions.

At high speeds.

The road signs are hidden, damaged, or are non-

standard.

▶

Risk of a head-on crash

Applies to vehicles with the Front Assist system

▶

The system triggers safety measures when it de-

tects the impending risk of a head-on crash.

▶

Risk due to inactivity on the driver’s part

Applies to vehicles with the Emergency Assist sys-

tem for emergency situations.

The road signs are attached to ﬂashing neon signs.

Non-current or unavailable map documents for the

navigation.

▶

The system triggers safety measures when it de-

tects the impending risk due to inactivity on the driv-

er’s part.

Function restriction

Settings

The function may be restricted or unavailable in the

following cases.

In Infotainment, in the following menu.

When deactivated in the infotainment in the menu

When ASR is deactivated or ESC Sport is activated

When reversing.

If there is a malfunction in the ESC, reversible seat

belt or airbag system.

If there is a malfunction or restriction of the Front

Assist system.

▶

◼

Traﬃc sign recognition

▶

Include in the instrument cluster - Activation / deactivation

▶

of the additional display in the instrument cluster

display

Speed warning: - Setting a warning when the permissi-

▶

ble speed is exceeded

Warning when more than - Increase the speed limit for

▶

when the warning of when the speed limit is bro-

ken is given

Trailer detection

When there is a malfunction or restriction of the

assistant for emergency situations - Emergency

Assist.

◼

▶

Show trailer-relevant traﬃc signs - Deactivation / activation

of the display of trailer-relevant traﬃc signs

Use for route calculation - Activation / deactivation of

▶

trailer consideration when calculating the route

in the navigation

Driver assist systems › Driver Alert fatigue detection assistant 187

forms measures as safely as possible to decelerate

the vehicle to a stop.

Settings

Automatic activation

The system is automatically activated when the igni-

tion is switched on.

The assist systems are only available for vehicles

with an automatic gearbox.

Functionality

Troubleshooting

When the assist system detects inactivity on the

part of the driver

Crew Protect Assist faulty

illuminates together with

Message concerning unavailability or function-

al restriction

An acoustic warning signal sounds and a message

▶

appears in the instrument cluster display.

If, after repeated warnings, the driver does not

take over the steering, the hazard warning lights

are switched on and the vehicle automatically

brakes.

▶

Seek the help of a specialist garage.

›

Driver Alert fatigue detection assistant

Functionality

After the vehicle has come to a standstill, the park-

ing brake is switched on. Depending on the equip-

ment, an emergency call can be made.

▶

Driver Alert evaluates the steering behaviour. If it de-

tects fatigue in the driver, a break is recommended.

In the display of the instrument cluster, the lights

up.

Interruption of automatic braking

By pressing the brake or accelerator pedal.

▶

By actively steering.

▶

WARNING

Functional conditions

There will be no system warning during the so-called

micro-sleep.

✓ Lane Assist is activated and the boundary lines of

Resetting the break recommendation

The break recommendation is reset in the following

cases.

the lane are recognized.

✓ ACC is enabled.

The vehicle stops and the ignition is switched oﬀ.

The vehicle stops, the seat belt is removed and the

driver's door is opened.

▶

Hill descent assistant

Functionality

The vehicle stops for more than 15 minutes.

▶

The downhill assistant helps to maintain a constant

speed when driving downhill through automatic

braking.

In some situations, the system may erroneously

issue a break recommendation.

The system also works when driving in neutral or

when reverse gear is engaged.

Operating conditions

WARNING

Risk of accident!

✓ Driving speed between 60-200 km/h.

For physical reasons, the system might not function

properly on a slippery surface, e.g. ice, mud and simi-

lar.

Settings

Activation / deactivation

In Infotainment, in the menu:

Status display in the instrument cluster display

is lit up in grey – the system is activated

lights up white / green - the system intervenes

Emergency situation assist

systemEmergency Assist

Change speed

The driving speed can be changed by pressing the

brake or accelerator pedal. After releasing the pedal,

the assistant maintains the current speed.

Usage

The assist systems for emergencies detect inactivity

of the driver, which, for example, can be caused by a

sudden loss of consciousness. The system then per-

Operating conditions

✓ The engine is running.

Driver assist systems for Your Skoda Kodiaq SUV 2020

Popular Manuals