Driver assist systems -> Front Assist for Your Skoda Kodiaq SUV 2020

178 Driver assist systems › Front Assist  
goes out when deactivated.  
Operating conditions  
ASR activated.  
Troubleshooting  
The driving speed is higher than 5 km/h.  
ESC or ASR faulty/deactivated by the system  
illuminates  
Functional restriction  
Stop the engine and start again.  
If the warning light does not go out after covering  
a short distance, seek the help of a specialist ga-  
rage.  
The function may be restricted or unavailable in the  
following cases.  
About 30 seconds after starting. Lights up in the  
instrument cluster  
.
ABS faulty  
When driving through a sharp bend.  
During an ESC intervention.  
illuminates  
You may continue driving, exercising appro-  
priate caution. Get the help of a specialist compa-  
ny.  
Settings  
Automatic activation  
Front Assist is automatically activated when the igni-  
tion is switched on.  
Brake system and anti-lock braking system faulty  
illuminates together with  
Stop driving! Get the help of a specialist  
company.  
Activation / deactivation in the instrument cluster  
Press the button on the multifunction steering  
wheel.  
Select Front Assist  
.
Front Assist  
Functionality  
Activation / deactivation and setting in Infotain-  
ment  
In the menu:  
Front Assist monitors the distance to the vehicle  
ahead and points out when the safety distance is ex-  
ceeded. In borderline situations, it helps to avoid a  
collision by braking interventions.  
Show system deactivation in the display of the in-  
strument cluster  
illuminates together with  
Status display in the instrument cluster display  
or  
illuminates - safety distance too small  
illuminates together with  
or  
illuminates - warning in case of collision  
Deactivate Front Assist when handling the vehi-  
cle on a truck, a car ferry etc.  
Automatic braking in the event of a collision  
If there is a risk of collision, the symbol lights up as a  
warning  
or  
from the isolation box. If you do  
Troubleshooting  
not respond to the warning, the vehicle will slow  
down.  
Front Assist is not available  
At a driving speed of up to 30 km / h, the vehicle is  
braked without prior warning.  
illuminates together with  
The automatic braking can be stopped by pressing  
the accelerator pedal or by steering.  
Or:  
illuminates together with  
With automatic braking, the pressure in the brake  
system increases. The brake pedal cannot be operat-  
ed by using the pedal as normal.  
Clean the front radar sensor.  
Stop the engine and start again.  
If Front Assist is still unavailable, check the brake  
lights on the vehicle or on the attached trailer.  
WARNING  
Risk of accident!  
Front Assist does not respond to crossing or oncom-  
ing vehicles.  
Replace the defective bulb.  
If the brake lights are working and Front Assist is  
still unavailable, seek the help of a specialist ga-  
rage.  
Driver assist systems › Pedestrian detection system 179  
There was an unfounded warning or system inter-  
vention  
Operation  
Variant without GRA  
Clean the front radar sensor.  
If the system is not working properly, disable Front  
Assist and seek the help of a specialist garage.  
Pedestrian detection system  
Functionality  
Pedestrian detection helps to avoid a collision with  
crossing pedestrians using automatic brake interven-  
tion.  
A
Activate limiter (control inactive)  
Deactivate limiter  
Status display in the instrument cluster display  
or  
lights up - Danger of collision  
Interrupt control (sprung position)  
Resume control1) / Increase limit  
Risk of collision in a speed range of 5-30 km/h  
The system triggers automatic braking.  
B
C
Start control at the current speed / reduce  
Risk of collision in a speed range of 30-60 km/h  
The system warns of a collision hazard first. If the  
driver does not respond, the vehicle is automatically  
braked.  
limit  
Variant with cruise control  
Functional conditions  
Front Assist activated.  
Driving speed between 5-60 km/h.  
Speed limiter  
Functionality  
A
Activate GRA (condition for the subsequent  
activation of the limiter)  
The speed limiter controls the maximum driving  
speed according to the set speed limit.  
To activate the speed limiter, press the D but-  
ton and the menu item Speed limit in the instrument  
cluster.  
If the limit is exceeded when driving downhill, brake  
the vehicle with the brake pedal.  
Deactivate limiter  
Status display in the instrument cluster display  
Interrupt control (sprung position)  
Resume control1) / Increase limit  
illuminates - the cruise control is activated.  
B
When the control starts,  
set limit is displayed.  
is highlighted and the  
C
Start control at the current speed / reduce  
limit  
illuminates - cruise control is active  
flashing - the set limit is exceeded  
D
Show menu of assistance systems - Possibility  
to switch between GRA and speed limiter  
Switching to cruise control interrupts the con-  
trol.  
Operating conditions  
Adjust the speed limit using the B and C keys  
Press for increments of 1 km/h.  
The driving speed is higher than 30 km/h.  
Hold for increments of 10 km/h.  
1)  
If no speed limit is set, the current speed is set as the speed limit.