Driver assist systems -> Lane change assist system Side Assist for Your Skoda Kodiaq SUV 2020

184 Driver assist systems › Travel Assist  
Setting in Infotainment  
In the menu:  
The function may be restricted or unavailable in the  
following cases.  
The field of view of the sensor is limited by a dirty  
screen or an obstacle or a preceding vehicle.  
In the event of unfavourable weather conditions.  
When driving through a sharp bend.  
When driving on a steep road or in ruts.  
When the driving lane is too narrow.  
Troubleshooting  
Message regarding system unavailability  
Clean the windscreen in the sensor area.  
Stop the engine and restart again after a short  
time.  
In addition to these restrictions, also observe the  
ACC restrictions » page 182 .  
If the system is still not available, seek the help of a  
specialist garage.  
WARNING  
Risk of incorrect steering intervention!  
Certain objects or markings on the roadway can be  
incorrectly recognized as boundary lines.  
Travel Assist  
Usage  
Always keep your hands on the steering wheel and  
be prepared to override the steering intervention.  
Travel Assist helps to keep the vehicle within the  
lane while controlling the speed of the vehicle.  
Settings  
Functionality  
Activation  
Press  
wheel.  
the button on the multifunction steering  
Travel Assist uses the functions Lane Assist and  
ACC.  
Regulation with the current speed and adaptive lane  
guidance are started.  
WARNING  
Risk of accident!  
Deactivation  
Depress the brake pedal.  
Always keep your hands on the steering wheel and  
be ready to take over the steering.  
The notes in the functional description of Lane As-  
sist and ACC must be observed.  
Or:  
Put the ACC lever into position  
» page 181 .  
Adaptive lane guidance  
This function keeps the driver within the selected  
position within the lane.  
Additional settings are identical to ACC and Lane  
Assist.  
Status display in the instrument cluster display  
is lit up – the system is activated, cruise con-  
trol and adaptive lane guidance are active  
Troubleshooting  
Message regarding system unavailability  
is lit up – the system is activated, cruise con-  
trol is active  
The problem solving instructions for Lane As-  
sist » page 184 and ACC » page 183 are as follows.  
is lit up – the system is activated, adaptive  
lane guidance is active  
If the system is still not available, seek the help of a  
specialist garage.  
Functional conditions  
Lane change assist system Side Assist  
Usage  
ACC is enabled.  
The max. driving speed is 210 km / h.  
The lane markings are clearly visible.  
In vehicles with manual transmission, the driving  
The system uses optical signals in the exterior mirror  
to alert the driver to vehicles that could be danger-  
ous when changing lanes.  
speed is greater than 30 km / h.  
Functionality  
Functional restriction  
The system monitors the area next to and behind the  
vehicle.  
Travel Assist is only for support and does not relieve  
you of the responsibility for driving.  
 
Driver assist systems › Traffic sign recognition 185  
The system warns of an approaching vehicle through  
the warning light in the exterior mirror cover on  
the side of the vehicle where the vehicle is recog-  
nized.  
The system can draw attention to objects along the  
road, such as high guard rails or noise barriers.  
In the following cases, the system does not have to  
issue a warning of another vehicle, or the warning  
may be issued incorrectly.  
Driving situations in which a system warning is  
given  
Unfavourable weather conditions.  
A very fast approaching vehicle.  
When going round a sharp bend or a roundabout.  
Settings  
In the instrument cluster display  
The system settings are made in the display of the  
instrument cluster in menu item Assistants  
.
In Infotainment  
The system settings are made in the infotainment  
system in the following menu.  
A.  
Your vehicle will be overtaken by vehicle  
The fast-  
er the vehicle A approaches, the earlier the warning  
light comes on.  
Vehicle B is overtaken by your vehicle at a speed  
that is faster by max. 10 km/h. If the speed is higher  
during the overtaking process, no warning will be  
provided by the indicator light.  
Troubleshooting  
Message regarding system unavailability  
Stop the engine and start again.  
If the system is still not available, seek the help of a  
specialist garage.  
Indicator light  
illuminates - there is another vehicle behind your  
vehicle  
flashes - there is another vehicle behind your ve-  
hicle, and the turn signal on the same side is switch-  
ed on  
Traffic sign recognition  
Usage  
For vehicles with Lane Assist The indicator light  
flashes even if your vehicle crosses the boundary line  
in the direction of the approaching vehicle. The sys-  
tem will trigger a steering wheel vibration in this  
case.  
The road sign recognition shows road signs in the  
display of the instrument cluster. This also indicates  
exceeding the speed limit.  
For this, Lane Assist must be activated and the boun-  
dary line between the vehicles recognized.  
Functionality  
Displayed traffic signs  
Speed limits.  
No overtaking.  
Driving bans - one-way traffic.  
Additional characters, e.g. speed limit in wet condi-  
tions.  
Operating conditions  
The driving speed is higher than 15 km/h.  
No accessories are connected to the trailer sock-  
et.  
WARNING  
Road signs on the road always have priority over the  
road signs shown on the display.  
Function restriction  
The system cannot detect lane width. For this rea-  
son, it may, for example, draw attention to a vehicle  
in a distant lane in the following cases.  
Driving with a trailer  
If a trailer or other accessories are connected to the  
trailer socket, trailer-relevant traffic signs are also  
displayed.  
Driving on a road with narrow lanes or on the lane  
edge.  
Driving on roads with no speed limits  
If you are on a road without speed limits, the traffic  
sign will appear on the display  
Driving round bends.