Get Driver information system Guide for Skoda Kodiaq SUV 2020

64 Heating and air conditioning system › Heated steering wheel

Settings

Driver information system

Lock the heating output of the rear seat heating

To turn the function on or oﬀ, press the but-

in the Infotain-

Analogue instrument cluster

Overview

›

ton on the Climatronic

ment screen.

Overview of the instrument cluster display

Or:

/Tap on

in the Infotainment

›

screen.

When the function is switched on, the heating out-

put can only be reduced.

The function also blocks the possibility of setting

the temperature in the display in the rear centre con-

sole.

Heated steering wheel

Conditions

Tachometer with indicator lights

Display

Speedometer with indicator lights

Bar with indicator lights

Multifunction button:

✓ The engine is running.

Operation

Set the time.

Reset ( trip ) odometer.

Display the distance travelled and the days un-

til the next service date.

▶

Press the button on the multifunction steering

wheel.

›

The seat heating is switched on with maximum heat-

ing power. By repeatedly pressing the button, the

heating output is reduced until it is switched oﬀ.

Coolant temperature display

Fuel level indicator

NOTICE

Risk of serious damage to the engine and the ex-

haust system!

Never run the fuel tank completely empty!

▶

In poor visibility and with dipped headlights oﬀ,

the brightness of the instrument cluster lighting is

reduced to remind the driver to turn on the light.

Display overview

Depending on the equipment, the following informa-

tion is shown on the display.

Time

Directional display

Gear engaged / gear

recommendation

Selector lever posi-

tions of the auto-

matic transmission

Traﬃc signs detec-

ted

Menu, indicator

lights and information

Outside temperature

or - low outside temperature

Driver information system › Digital instrument cluster 65

Release the button, the display shows the hour set-

ting.

Press the button repeatedly and set the hours.

Wait 4 seconds, the display shows the minute set-

›

Total distance travelled

Trip - Distance travelled after resetting the

memory

›

Overview of the main menu items

Driving data » page 67.

Assistants - Activate / deactivate assistance sys-

tems.

Navigation - e.g. show driving recommendations,

compass, destination list.

ting.

▶

Press the button repeatedly and set the minutes.

Wait 4 seconds, the display shows the initial set-

ting.

›

▶

The time is set in the Infotainment system in the fol-

lowing menu.

Audio - Using radio and media.

▶

Telephone - call list, accept or reject incoming call.

Vehicle - Vehicle condition » page 68.

Lap timer - stopwatch » page 69 .

Set the brightness of the instrument cluster light-

ing

The brightness of the instrument lighting is automat-

ically adjusted depending on the given lighting condi-

tions.

Operation

When low beam is switched on, the brightness of

the instruments lighting can be adjusted in the fol-

lowing menu in the Infotainment system.

Operation via the control lever

Press - Switch be-

tween menu items /

set values

Hold - Display the

main menu

Or:

Press - Conﬁrm

menu item

Digital instrument cluster

Overview

Operation via the multifunction steering wheel

Turn - Switch be-

tween menu items /

set values

Overview of the instrument cluster display

Press - Conﬁrm

menu item

Press - Return one

level higher in the

Hold - Display the

main menu

Press - Show previous menu (if one was selec-

ted) / Show phone menu

Bar with indicator lights

Coolant temperature display

Fuel level indicator

Display

Settings

Set language

The language is set in the following menu in the Info-

tainment system.

Additional information

Central display area

Reset the odometer

NOTICE

Brieﬂy press the button in the instrument

cluster.

›

Risk of serious damage to the engine and the ex-

haust system!

Setting the time

Never run the fuel tank completely empty!

▶

Press and hold the button in the instru-

ment cluster until the menu item Time is

displayed.

›

Overview of the main menu items

Driving data » page 67.

▶

66 Driver information system › Digital instrument cluster

Assistants - Activate / deactivate assistance sys-

tems.

Navigation - e.g. show driving recommendations,

compass, destination list.

Set the brightness of the instrument cluster light-

ing

The brightness is adjusted automatically according

▶

to the given lighting conditions.

Audio - Using radio and media.

▶

The brightness is adjusted with the dipped beam

switched on in the infotainment in the following

menu.

Telephone - call list, accept or reject incoming call.

Vehicle - Vehicle condition » page 68.

Lap timer - stopwatch » page 69 .

Or:

Operation

Set the variant of the display

Rotate - Switch be-

tween menu items /

set values / change

map scale manually

Press the button on the multifunction steering

›

wheel to change the variant of the display presen-

tation.

Press - Conﬁrm

Select the variants shown

menu item

Turn and press -

Press and hold the button on the multifunction

steering wheel.

›

Switch on automatic

change of map scale

Press - Return one

Select and conﬁrm the menu item for the display

variants.

Select and conﬁrm one of the following variants of

the display.

›

level higher in the menu

Hold - Display the main menu

Depending on the equipment:

Press - Change the version of the display

▶

Hold - Display the pre-set options menu with

▶

additional information

Settings

Set language

The language is set in the following menu in the Info-

tainment system.

Classic display

Reset the odometer in the instrument cluster

Extended display

Select Trip in the menu in the instrument cluster dis-

play

›

Modern display

Rotate - Select entry

Basic display

Press - Conﬁrm en-

try

Sporty display (depending on equipment)

Select to display additional information

Hold - Reset counter

Press and hold the button on the multifunction

steering wheel.

›

Select and conﬁrm one of the following pre-selec-

tion options (the scope of the pre-selection op-

tions depends on the infotainment type).

›

▶

Auto - Information depending on the selected

Setting the time

The time is set in the following menu in the Infotain-

ment system.

driving mode

Classic - Information about the gear selected

and the current speed.

▶

Adjustable pre-selection options.

Driver information system › Driving data 67

Setting the pre-selection option for the display of

additional information

The pre-selection option for displaying additional in-

formation is set in the Infotainment system in the

following menu.

Graphic fuel gauge - If the expected range is less

than 300 km, the vehicle slowly approaches the

symbol

Range

Storage

Menu item for the virtual cockpit

Or:

The system saves the driving data in the following

memories.

Menu item for the virtual cockpit

Since start

Driving data from the time of switching on the ig-

nition until the ignition is switched oﬀ again is stor-

ed in the memory. If the journey is interrupted for

more than 2 hours, the memory will be reset.

▶

Long-term

The driving data of all trips up to a total of 99

hours and 59 minutes driving time or 9999 km

driving distance are stored in the memory. If one of

the listed values is exceeded, the memory is reset.

▶

Select the desired additional information in areas

Since refuel

›

Driving data from the last fuel tank are stored in

the memory. The memory is reset the next time

the tank is ﬁlled.

▶

Hold the desired function area for the pre-selec-

›

tion option in the area B to save the selection (the

scope of the pre-set options depends on the type

of Infotainment).

Operation

Display driving data in the display of the instru-

ment cluster via the operating lever

Driving data

Overview

Select the menu item for the driving data in the

›

main menu in the instrument cluster display.

The driving data display works with the ignition

switched on.

Press - Select en-

try / set values

Press - Conﬁrm en-

try

In the instrument cluster display

Depending on the equipment, the display of the in-

strument cluster shows information such as speed,

fuel consumption, range, etc.

Display driving data in the display of the instru-

ment cluster via the multi-functional steering

wheel

In Infotainment

Select the menu item for the driving data in the

main menu in the instrument cluster display.

›

Turn - Select entry /

set values

Press - Conﬁrm en-

try

Travelled distance

Driving time

Display drive data in the Infotainment

The driving data is displayed in the following menu in

the infotainment system.

Average speed

Average fuel consumption

Driving economy evaluation - DriveGreen func-

tion (depending on the Infotainment

type) » page 172

Menu item for driving data

Or:

68 Driver information system › Speed limit warning

Menu item for driving data

Select and reset the memory for driving data in

the display of the instrument cluster using the

control lever

Speed limit warning

Usage

To select the memory

›

for the displayed driv-

ing data, press button

A repeatedly.

The system oﬀers the possibility to set a speed limit

beyond which an acoustic warning signal will sound

and the following warning message appears in the

display of the instrument cluster.

To reset the memory,

hold down the A but-

›

ton.

Settings

Select memory for driving data in the display of

the instrument cluster via the multifunction steer-

ing wheel and reset it

Setting the speed limit

Select and conﬁrm the menu item Warning at or

(depending on display type).

›

To select the memory

›

When the vehicle is stationary, set the desired

speed limit and conﬁrm.

›

for the displayed driv-

ing data, press the set-

ting wheel A repeat-

edly.

While driving, drive at the desired speed and con-

ﬁrm it as the speed limit.

›

To reset the memory,

hold the setting wheel

›

Resetting the speed limit

Select and conﬁrm the menu item Warning at or

›

(depending on display type).

To reset the speed limit, conﬁrm the stored value.

›

If the journey is interrupted for more than 2 hours,

the set limit is deactivated, but the set value remains

stored.

Select memory in infotainment

To select the memory, use the functional areas

in the following menu in the infotainment system.

Menu item for driving data

Or:

Vehicle status

Display

Menu item for driving data

Reset memory in infotainment

The memory is reset in the following menu in the in-

fotainment system.

The vehicle status is displayed in the following menu

in the infotainment system.

Menu item for vehicle status

Or:

Menu item for vehicle status

Settings

Select the driving data to be displayed

The driving data to be displayed is selected in the

following Infotainment menu.

Or:

Vehicle areas shown in colour indicate associ-

ated warning messages

Set units

The units are set in the following Infotainment menu.

No notiﬁcation

Warning messages regarding the vehicle con-

dition and their quantity

Or:

Driver information system › Stopwatch in the instrument cluster 69

Since start - Start the timer automatically upon

start-up

Statistics - Evaluate and reset the measured times

▶

Display of information about the status of

the START-STOP system

▶

Activation / deactivation of the infor-

▶

mation regarding the messages of the START-

STOP system in another screen display

Fastest - The fastest lap

▶

Slowest - The slowest lap

▶

Average - the average lap time

▶

Overall time - the total of all the lap times

Reset - Reset all measured times

Functionality

▶

In the event of a system fault, messages relating to

the relevant fault are shown on the instrument clus-

ter display when the ignition is switched on.

New lap - Start measuring the next lap time

Split time - show the split time

Stop - Interrupt the time measurement

▶

Malfunctions can also be displayed in infotainment.

▶

Continue - Continue measurement of the current

lap time

As long as the malfunctions have not been rem-

edied, the warning messages are displayed again and

again. After the ﬁrst display of the message, only the

indicator lights remain on (Hazard) or (Warning)

is displayed.

▶

New lap - Start measuring the next lap time

Abort lap - Cancel the time measurement with-

out saving the measured time

Exit - Cancel the time measurement and save the

▶

measured time

Stopwatch in the instrument cluster

Usage

Stopwatch in the Infotainment

Overview

The function Laptimer oﬀers the possibility to use up

to 11 lap times, e.g. when driving on a race track, to

measure and display in the display of the instrument

cluster.

The stopwatch display is shown in the menu in the

Infotainment.

Sport

Or:

Operation

Sport

Select Lap timer in the menu item in the instrument

cluster display.

›

Displaying functions via the multifunction steering

wheel

Turn - Select entry /

set values

Press - Conﬁrm en-

try

Overall time

Start the measurement

Stop the measurement

Current lap time

Displaying functions via the control lever

Evaluate/reset split times

Press - Select en-

End the measurement (the current lap time is

not stored)

try / set values

Press - Conﬁrm en-

try

Start measurement of the next lap time

The split time is brieﬂy shown in the display A

End the measurement (the current lap time is

stored)

Overview of functions

Start - Start the time measurement manually /

▶

continue the interrupted measurement

70 Driver information system › Information Sport

Vehicle status

Information Sport

Settings

Or:

Vehicle status

The Sport information display is shown in the menu

in the Infotainment.

The account changes e.g. when changing drivers

while traveling. This prevents unwanted resetting of

the personalized functions in the active user account.

Sport

Or:

Sport

Settings

A swipe of the ﬁnger vertically across the screen al-

This function is set in the following menu in the Info-

tainment system.

lows three of the following displays to be shown.

Charge pressure.

Acceleration.

▶

Or:

Output.

Coolant temperature.

Oil temperature.

Key assignment - Options for assigning the recog-

▶

nized key to the active user account

▶

Manual - the key must be assigned to the active

account manually

Automatic - detected key automatically assigned

Personalization

Usage

▶

to a diﬀerent account of the active account

Assign key to current user account - Manual as-

signment of the key to the active account

The personalization feature allows each vehicle key

to be assigned a user account.

▶

In the user account, settings can be assigned regard-

ing e.g. light function, driver's seat and exterior mir-

ror position, assistance systems, radio, navigation,

etc.

To maintain the assignment of the selected user

account to the selected key, we recommend that

you select the manual key assignment.

Functionality

After opening the driver's door, the personalized

functions are set according to the user account as-

signed to the key with which the vehicle was un-

locked.

There are three user accounts and a guest account.

A change in the set personalized functions is auto-

matically saved in the active user account.

Change user account

WARNING

Risk of accident!

Carry out the account change while the vehicle is

stationary.

▶

In the instrument cluster display

Switching to a diﬀerent user account is

›

in the instrument cluster display within

10 seconds after turning on the igni-

tion.

In Infotainment

The system settings are made in the Infotainment

in the following menu.

›

Driver information system for Your Skoda Kodiaq SUV 2020

Popular Manuals