Infotainment Swing › Media 77
Do not use SD cards with a broken slide for write
protection.
▶
Limitation
NOTICE
To insert the SD card, with the bevelled corner to
the right, push into the slot in the external module
until it snaps into place.
›
The availability of some media operation functions is
dependent on the connected source and the soft-
ware being used, e.g. Bluetooth®.
To remove, first disconnect the SD card safely. To
›
›
do so, in the main menu tap Media
Remove safely:
Settings
and select the SD card.
Press on the inserted SD memory card.
Switch track playback including subfolders on / off
The SD card moves to the eject position.
In the main menu, tap Media
Mix / repeat including sub-
›
folders
.
NOTICE
When using an SD card with an adapter, vehicle vi-
brations might cause the card to fall out of the
adapter.
Traffic
To turn on/off the traffic monitoring during the
playback of media files, go to the Media main menu
›
and tap on
Traffic programme (TP).
USB device
To connect, insert the USB device into the appro-
priate port.
›
Safely disconnect the connected device
NOTICE
Use USB ports that support data transfer to play
audio files.
Risk of damage to the data on the connected device!
To safely disconnect/remove the device, proceed as
follows.
To disconnect disconnect the USB device first. To
›
In the main menu, tap Media
Select the desired device.
Disconnect/remove the device.
Remove safely:
.
do so, in the main menu tap Media
Remove safely:
›
›
›
and select the USB device.
Disconnect the USB device.
›
A USB device can be connected directly to the
USB port or via a connection cable.
We recommend that you use extension cords from
ŠKODA original accessories.
USB extension cables or reducers can impair the
playback function of the connected device.
If it is not possible to safely disconnect the de-
vice, switch off the Infotainment and disconnect the
device.
Bluetooth® player
Infotainment allows audio files of a connected Blue-
tooth® player to play using the A2DP and AVRCP au-
dio profile.
Load USB audio source
After connecting the USB device, charging will start
automatically when the following conditions are met.
With Infotainment, multiple devices can be paired
using Bluetooth®, but only one of them can be used
as a Bluetooth® player.
✓ The ignition is switched on.
✓ The USB device allows charging.
For connecting the Bluetooth® player, pair and
connect the device via Bluetooth®.
›
The charging efficiency can be different compared to
the charging from the usual mains power supply.
In the Media main menu , tap on
Bluetooth paired
›
›
devices
.
Depending on the type of the connected USB device
and the frequency of use, the charging current may
not be sufficient to charge the battery of the con-
nected device.
In the list, choose the device with the symbol
.
If a device is connected to Infotainment using
Apple CarPlay or Android Auto, then it cannot be
connected using Bluetooth®.
Some connected audio sources may not be recog-
nised and cannot be charged.
SD card
NOTICE
Risk of damaging the SD card reader!
Supported sources and files