52 Lighting, windscreen wipers and washers › COMING HOME, LEAVING HOME exterior lighting
service
turn on
COMING HOME, LEAVING HOME
exterior lighting
Functionality
Push the lever in the
direction of the arrow.
›
The COMING HOME function turns on the light after
turning off the ignition and opening the driver's door.
The light switches off automatically after the set
lighting time has elapsed.
Lights up in the instru-
ment cluster
from
the isolation box.
The LEAVING HOME function switches on the light
when unlocking the vehicle with the wireless remote
control.
Turn off
Manually switch the high beam on or off.
›
Functional conditions
Settings
✓ Visibility has worsened.
Activation / deactivation
The function is activated or deactivated in the fol-
✓
The light switch is in the
position.
lowing menu in the Infotainment system.
Settings
Or:
This function is set in the following menu in the Info-
tainment system.
Or:
Replace light bulbs
What you should be mindful of
DIY replacement of the following bulbs is possible.
Have the remaining light sources replaced by a spe-
cialist garage.
Light Assist high-beam assist system
Functionality
The new bulb must conform to the specification of
the original light bulb. The name of the bulb is
marked on the bulb socket.
The high beam assist system automatically switches
the high beam on and off.
After changing a bulb in the low beam light, the main
beam or fog light, have the headlights adjusted by a
specialist garage.
WARNING
Risk of accident!
If necessary, manually switch the high beam on or
▶
off.
CAUTION
Halogen lamps are pressurised and can burst during
replacement!
Functional conditions
Wear gloves and safety goggles.
▶
✓ The system is activated.
NOTICE
✓
The light switch is in the position
.
Contamination of the halogen lamp reduces the life
✓ The driving speed is higher than 60 km/h (for
of the lamp!
some countries, higher than 40 km/h).
Do not touch the glass of the light bulb with your
▶
bare fingers.
✓ The low beam is switched on.
NOTICE
Danger of headlight damage due to the ingress of
water and dirt!
Always fit the protective cap on the headlight cor-
▶
rectly after changing a bulb.
Conditions for changing a bulb
✓ Ignition switched off.
