Seats, steering wheel and mirror › Second row of seats 37
Each of the memory buttons on the driver's seat can
be used to store and recall the set driver's seat and
exterior mirror position.
Turn the exterior mirror knob to the position
Engage reverse gear.
Adjust the mirror to the desired position.
Disengage reverse gear.
.
›
›
›
›
Depending on the equipment, the front passenger
seat may also have a memory function.
The set mirror position is saved.
When changing the stored seat and exterior mir-
ror position for forward driving, the passenger exte-
rior mirror position for reverse driving must be re-
stored.
Operation
Retrieve stored position
With the ignition off and the driver’s door open,
press the desired memory button.
›
In other instances, hold the button for example
with the ignition switched on or the driver's door
›
Second row of seats
closed.
Adjust the second row of seats
Move the seats lengthways
The passenger seat position can be retrieved in the
same way.
› Pull on the lever A and
Stop position change
move the seat.
With the ignition off and the driver's door open,
press any button on the seat to be adjusted.
›
The seat must audibly
click into place.
Or:
Press the button on the key.
›
In other cases, release the held memory button.
›
Settings
Adjusting the inclination of the seat backrests
Storing driver's seat and exterior mirror position
for driving forwards
› Pull on the loop A and
adjust the inclination of
the seat.
Turn on the ignition.
Adjust the seat and the
›
›
The backrest must
exterior mirrors.
click audibly into place.
› Press the button A
and within 10 seconds
one of the memory
buttons B .
Storing is confirmed by
an acoustic signal.
Access to the third row of seats
Applicable to the seven-seater variant of the vehicle.
The seat position can be stored if the angle of in-
clination of the seat back relative to the seat surface
is less than approximately 110° and the seat is not in
any of the end positions.
Pull the release handle.
Fold the seat back for-
›
›
wards and move the
seat forwards.
Save front passenger seat position
Storing the passenger seat position is analogous to
storing the driver's seat position.
Storing front passenger´s exterior mirror position
for reversing
Turn on the ignition.
Activate the folding function of the mirror in the
Infotainment in the following menu.
›
›
Or:
