Starting and driving › Manual gearbox 169
When the system is deactivated, the symbol lights
up in the button
In mode the gear is changed at higher speeds
.
than in mode
.
Select between and (sprung position)
If a system-related engine switch-off occurs and the
system is deactivated, the engine will start.
Selector lever out of position or solve
lights up - the selector lever is locked
Troubleshooting
Press the brake pedal,
›
The engine does not switch off when stopping, or
it starts before starting up
The system has detected that the engine is running.
and at the same time,
press the button in the
selector lever.
Manual gearbox
Operation
NOTICE
Danger of engine damage!
WARNING
Shift to a higher gear before reaching the red area
on the tachometer scale.
▶
Danger of the vehicle rolling away automatically!
▶ When the selector lever is in the position
,
or
in manual shift mode, secure the vehicle with the
brake.
NOTICE
Danger of gearbox damage!
Fully depress the clutch pedal when changing gear.
▶
When not shifting gear, do not put your hand on
the shift lever.
▶
Operation
Start up
Engaging reverse gear
Stop the vehicle.
Fully depress the clutch.
Move the shift lever to the neutral position.
Push the shift lever down.
Turn it completely to the left.
Wait briefly.
Engage reverse gear.
Keep the brake pedal depressed.
Start the engine.
Press the button on the selector lever and set it to
the desired position.
›
›
›
›
›
›
›
Release the brake pedal and press the accelerator
pedal lightly.
›
›
›
Speeding up while driving (kick-down)
›
Fully depress the accelerator.
›
Stopping temporarily (e.g. at a junction)
Automatic gearbox
Selector lever positions
Parked vehicle
Leave the selector lever in the position
cure the vehicle with the brake pedal.
and se-
›
Stop
Keep the brake pedal depressed.
Secure the vehicle with the parking brake.
Press the button in the selector lever and bring it
to the position adjust.
›
›
›
The drive wheels are
locked.
Only adjust he po-
sition when the vehi-
cle is stationary.
Turn off the engine.
›
Drive in neutral
Reverse gear
If the system detects that no gear is engaged while
driving, it automatically switches to neutral position.
Only adjust he po-
sition when the vehi-
cle is stationary.
It will
be displayed in the instrument cluster.
Idle position
There is no transmission of engine power to the
wheels.
Forward drive / sports program
The gear is changed automatically.
Requirements for driving in neutral position
✓
The mode is selected.
✓ Neither the accelerator nor the brake pedal is
pressed.
✓ The vehicle speed is 20-130 km/h.
✓ No device is connected to the trailer socket.
