Get Storage space and interior equipment Guide for Skoda Kodiaq SUV 2020

216 Storage space and interior equipment › Equipment in the boot

Remove

Storage space and interior

equipment

Equipment in the boot

Overview

Hook the bracket to remove the wheel covers at

the edge of the panel as close to the centre as pos-

sible.

Loosen the centre of the wheel cover by pulling

and pull oﬀ the cover.

›

To make removal easier, it is possible to insert the

A

Applicable to the ﬁve-seater variant of the vehi-

wheel wrench through the bracket loop and pull on

the two key ends.

cle.

Removable partition of the storage compart-

ment

Max. load 2.5 kg

Install

If an anti-theft wheel bolt is used, it must be in the

position marked on the cover.

›

B

Lever for folding forward the rear seat backrests

Place the cover on the wheel rim and press in the

individual spokes of the cover one after the other

until they engage completely.

Press in the centre of the wheel cover until it clicks

into place.

›

C

Fixed storage compartment

Max. load 1.5 kg

D

E

F

12 voltsocket

Hitch switch

›

Applicable to the seven-seater variant of the ve-

hicle.

NOTICE

Use hand pressure, do not hit the wheel cover.

▶

Side compartment

Pull at the loop to open.

›

Emergency equipment

Overview of the emergency equipment

Emergency equipment in the luggage compart-

ment

A

Positioning of the ﬁrst aid kit (depending on

equipment)

B

Tool kit

C

Placing of the warning triangle

Storage space and interior equipment › Storage compartment for the reﬂective vest 217

Storage compartment for the reﬂective vest

The storage compartment for the reﬂective vest is in

the storage compartment of the front door.

Fasteners in the boot

Overview

Fire extinguisher under the passenger seat

Five-seater variant of the vehicle

Tool kit

Pocket hook

A

Max. load 7.5 kg

Hook for fastening the fastening nets

Depending on the equipment, not all of the following

components may be included in the tool kit.

B

Lashing eyes for securing the load and the fas-

tening nets

C

Max. load 350 kg

Seven-seater variant of the vehicle

A

B

C

D

E

Attachment for the anti-theft wheel bolts

Towing lug

Bracket for removing the full wheel covers

Jack with sign and crank

Pocket hook

A

Wheel wrench

Max. load 7.5 kg

F

Removal clip for the wheel bolt cover caps

Breakdown set

Hook for fastening the fastening nets

B

G

Lashing eye for securing the load and the fasten-

ing nets

Max. load 350 kg

C

The declaration of conformity is enclosed with the

jack or the logbook folder.

Storage compartment for the reﬂective

vest

218 Storage space and interior equipment › Bag hooks in the boot

Other fastening elements

Cargoelements in the luggage

compartment

Sliding bag hook

Max. load 7.5 kg

Cargoelements

Max. load 8 kg

A

B

The maximum load of the Cargoelements is 8 kg.

A storage compartment for the cargo elements

is located under the ﬂoor covering in the boot.

Fastening nets

Overview

Fold up the cargo element and fasten it to the

ﬂoor covering in the boot.

›

Bag hooks in the boot

The maximum load of the respective fastening nets

is 1.5 kg.

The maximum load for the hook is 7.5 kg.

Storage space and interior equipment › Sliding hooks 219

Before installing the net partition behind the sec-

ond row of seats, fold forward the third row of

seats.

›

Sliding hooks

Settings

› ^{Insert the crossbar into the mount}A on one side

Moving

and push it forwards.

Releasing

Moving

1

Attach the bar to the other side in the same way.

›

2

3

› ^{Snap the carabiners}B into the lashing eyes.

› ^{Pull the straps ﬁrmly at the free ends}C .

Applying

Fasten at the front

The procedure is analogous to the process behind.

The lashing eyes for the carabiners are located under

the central body pillars.

Loosen

Removal

Loosening takes place in the reverse order to fasten-

ing.

Move the hook into the

front area of the ﬁxing

strip and remove it.

›

Double-sided ﬂoor covering

Overview

Depending on the equipment, the vehicle may be

equipped with a double-sided ﬂoor covering in the

luggage compartment. One side is made of fabric,

the other side is washable.

Inserting hook

Press the hook against

the front part of the

ﬁxing strip and fold it

down to the stop.

Floor covering in the boot

Folding up and folding down

The maximum load for the hook is 7.5 kg.

Net partition

NOTICE

Fasten the net partition

Fasten at the back

Before closing the boot lid, remove the hook from

the frame.

220 Storage space and interior equipment › Roll-up luggage compartment cover

Insert the cover into

the recesses of the

side panel.

›

Roll-up luggage compartment cover

Operation

Extending

Close the side pockets.

›

Restore the original

position of the variable

loading ﬂoor.

Pull out the cover on

the handle until it clicks

into place.

›

Variable loading ﬂoor in the boot

Setting the position

The maximum load of the rear plate in the upper po-

sition is 25 kg. The maximum load of both plates in

the upper position is 75 kg in total.

Retracting

Press the cover in the

handle area.

›

Five-seater version of the vehicle – the variable load-

ing ﬂoor consists of two parts.

The cover rolls up.

It is possible that the

cover rolls more slowly

during winter weather

conditions.

Seven-seater verison of the vehicle – the variable

loading ﬂoor consists of one part.

For vehicles with a two-part variable loading

ﬂoor, one side of the rear panel may be made of fab-

ric and the other side may be washable.

In vehicles with an emergency wheel or vehicle

battery under the ﬂoor covering in the luggage com-

partment, the variable loading ﬂoor cannot be adjus-

ted to the lower position.

For vehicles with an emergency wheel under the

ﬂoor covering in the luggage compartment, the max-

imum load on the ﬂoor covering is 5 kg.

Removing and inserting

Take out and insert the roll-up cover

Press the end of the

›

crossbar and take out

or insert the cover.

Set the variable loading ﬂoor to the upper or lower

position

The front and rear plates of the variable load ﬂoor

can be adjusted to the upper or lower position. The

handling of the two panels is identical.

Lift the variable load

ﬂoor and pull it to-

›

wards you.

Stowing the cover under the variable loading ﬂoor

Applicable to the seven-seater variant of the vehicle.

Open the side pockets.

›

Storage space and interior equipment › Partition in the boot 221

To set in the upper po-

›

Partition in the boot

Removing and inserting

Remove the partition

sition, place the varia-

ble loading ﬂoor in the

front area on area A .

To set in the lower po-

sition, place the varia-

ble loading ﬂoor in the

front area on space B .

Press the variable load-

ing ﬂoor forward and

hang up.

›

Vehicle version: Five-seater/seven-seater

The partition prevents the cargo from slipping.

Remove the partition upwards.

›

Dividing the boot

Through-loading bag

Insert and lock

Lift the rear plate of

the variable loading

ﬂoor.

Push the plate into the

grooves A .

›

In the bag, a max. of 2 pairs of skis with poles can be

transported.

Fold the middle rear seat back forward. Where ap-

plicable, fold down the third row of seats.

›

Push the skis and poles with the tips backwards in-

to the bag and secure the bag.

›

The bag can be shortened in relation to the length

of the ski by means of a band attached inside the

bag.

Place the empty bag in the opening in such a way

that the end of the bag with the zip is in the boot.

Fold the front plate up and back

Lift the plate. The plate

is inserted into the

›

grooves A .

Tighten the drawstring

around the skis on the

base of the binding.

›

Folding it back takes

place in reverse order.

›

Insert the belt tongue

into the buckle of the

middle seat.

›

222 Storage space and interior equipment › Overview of passenger compartment

Max. load 1.5 kg

Press the left button on the lid of the lower

storage compartment to open it.

›

G

H

Storage compartment

Bottle holder with a capacity of max. 1.5 l

Storage compartment for the waste container

Storage compartment for the reﬂective vest

▶

Bottom storage compartment with air outlet

nozzle

In the compartment, there is a card holder, a pen

holder and a storage compartment for coins.

Snap the carabiners onto the lashing eyes on both

sides.

›

Max. load 3 kg

To better access the eyelets, the backrests of the

Press the button on the right to open.

To open the air outlet nozzle, turn the regulator

›

second row of seats can be folded forward.

Tighten the straps.

›

to position

.

WARNING

I

Storage compartment

In the compartment is a 12-volt socket and

USBconnections.

The maximum weight of the transported skis is

10 kg.

The USBconnections can be used for charging

and data transfer.

Overview of passenger compartment

Overview of practical equipment in the front

Pull the strip to open the compartment.

›

J

Opening and adjustable armrest with storage

compartment

Raise the armrest to open the compartment.

›

K

Storage compartment

Max. load 0.5 kg

A card holder is located in the compartment.

Pull on the handle to open.

›

NOTICE

Do not leave any heat-sensitive objects in the

▶

D.

spectacle compartment

A

B

C

D

Make-up mirror

Note holder

Parking ticket holder

Spectacle compartment

Max. load 0.25 kg

Press the button to open.

›

E

F

USB connection

The USBconnection is for charging only.

Upper storage compartment

Storage space and interior equipment › Storage pockets on the inner sides of the front seats 223

Overview of practical equipment at the rear

Storage pockets on the inner sides of the

front seats

A

Coat hooks

Max. load 2 kg

B

C

D

Folding table

Parking ticket holder

Storage bag

Depending on the equipment:

12 volt socket

▶

230 volt socket

▶

E

F

Storage compartment

Bottle holder with a capacity of max. 1.5 l

▶

Storage compartment for the reﬂective vest

▶

Storage bag

WARNING

Only hang light clothing on the hooks. Do not leave

heavy and sharp objects in the pockets of the

clothing.

▶

Do not use hangers to hang clothes.

224 Storage space and interior equipment › Bottle tray in the storage compartment of the front door

Bottle tray in the storage compartment

of the front door

USBConnections

The USBconnection can only be used for charging.

The tray is suitable for bottles with a max. size of 1.5

l.

Bottle tray in the storage compartment

of the rear door

The USBconnections can be used for charging and

data transfer.

The tray is suitable for bottles with a max. size of 1.5

l.

Storage space and interior equipment › Hook on the middle body pillar 225

Glasses compartment

The USBconnections can only be used for charging.

Hook on the middle body pillar

The maximum load for the compartment is 0.25 kg.

NOTICE

Do not leave any heat-sensitive objects in the

▶

glasses compartment.

Pen holder

The maximum load for the hook is 2 kg.

WARNING

Only hang light clothing on the hooks. Do not leave

heavy and sharp objects in the pockets of the

clothing.

▶

Do not use hangers to hang clothes.

226 Storage space and interior equipment › Storage compartment for cards, coins and SD card

Never put hot beverage containers in the cup hold-

er.

▶

Storage compartment for cards, coins

and SD card

NOTICE

Danger of damage to the electrical system and the

panels from spilled drinks.

Storage compartment under the front

seat

Open the storage compartment

The maximum permissi-

ble load for the storage

compartment is 1.5 kg.

Storage compartment for an umbrella

Overview

Storage compartment for cards in the

storage area on the driver's side

NOTICE

Risk of damage to the body and the interior panelling

of the vehicle!

Only place the umbrella from the ŠKODA original

accessories in the storage compartment.

Always push the umbrella into the storage com-

partment as far as it will go.

▶

Third row of seats - cup and phone

holder

CAUTION

Risk of scalding!

Storage space and interior equipment › Phonebox 227

phone and put it back in the centre of the phone

symbol on the pad.

Phonebox

What you should be mindful of

CAUTION

Risk of burns during charging.

The phone may get warm, remove it carefully from

the storage compartment.

Do not leave any metal objects in the compartment

under the phone. If there is a metallic object in the

storage compartment, which has become hot, re-

move the phone and let it cool down in the storage

compartment!

Cup holder

Overview

▶

Cup holder in front

▶

A bottle can be opened

with one hand in the

holder.

Press the bottle into

the holder and un-

screw the cap.

›

Functionality

Functions of the Phonebox

Wireless phone charging.

▶

Ampliﬁcation of the telephone signal (only valid for

some countries).

▶

Cup holder in the back

The Phonebox is located in the storage compartment

in the front centre console.

Insert a telephone with a maximum size of 160x80

mm into the storage compartment.

Charge status display

When the phone is charging, lights up in the status

bar on the Infotainment screen.

Recommendations for optimal function

✓ The phone is positioned with the screen facing

up.

✓ The protective cover of the phone is removed.

✓ The phone is centred on the phone icon on the

pad.

Operating conditions

Conditions for wireless charging

✓ Ignition is switched on.

✓ The phone supports the Qi standard.

✓ There is no object between the pad and the

CAUTION

Risk of scalding!

Never put hot beverage containers in the cup hold-

er.

phone.

▶

NOTICE

Troubleshooting

Danger of damage to the electrical system and the

panels from spilled drinks.

A message was displayed on the Infotainment

screen stating that the mobile phone could not be

charged.

Check that there is no object between the support

and the phone to be charged. If this is the case, re-

move the phone and the item. Place the phone

centrally on the phone symbol on the pad again.

Check that the position of the phone to be charged

has not changed. If this is the case, remove the

▶

228 Storage space and interior equipment › Waste container

cigarette lighter

Waste container

Replace bags

Push in the lighter.

Wait until the glowing

lighter pops back out.

›

Remove and use the

lighter.

Push the lighter back

in.

›

The socket of the ciga-

rette lighter serves as a

12V socket.

Folding table

service

Ashtray and cigarette lighter

What you should be mindful of

Fold up the table

Fold the table up to the

desired position.

›

CAUTION

Risk of burning or ﬁre!

Do not use the ashtray for storing hot or burning

objects.

▶

Handle the lighter carefully.

▶

service

The ashtray is inserted in the cup holder.

Open the ashtray

Unfold the table

Press the safety button

and unfold the table.

›

Slide out the cup holder

Remove the lid

The maximum load for the table is 8.5 kg.

CAUTION

Risk of injury!

While driving, the table must be in the folded-

down position.

▶

Storage space and interior equipment › Multifunction holder 229

adjust size

Multifunction holder

Overview

Pull out the locking tab

›

and move the upper

part of the holder to

the desired position.

Cup holder

A

B

Storage compart-

ment for storing the

cover of the 12-volt

power outlet

Set the minimum size of

the empty holder to

avoid noise while driving.

Storage compart-

ment for the vehicle

key

Storage compart-

ment for coins and

C

D

Removal and Insertion

card

Storage tray

Fasten behind the headrests

E

Place the open adapter

on the front guide rods

of the headrest and

clip in carefully.

›

The multifunction holder can be removed or rotated.

Ceiling

Remove and insert

The blanket is in a bag that can be attached to one of

the following locations.

On the guide rods of the front headrests.

In the storage pockets on the backs of the front

seats.

▶

Clip in the holder in the

adapter.

›

On the operating lever for adjusting the second

seat row in the longitudinal direction.

▶

Tablet holder

Settings

Tilt and turn

Removal

Press the safety button

and unfold the holder.

›

230 Storage space and interior equipment › 12-Volt power socket

Press on the adapter

and remove it.

›

Operating conditions

✓ The engine is running.

On vehicles with the START-STOP system, the

socket also works in STOP mode.

Troubleshooting

The indicator light ﬂashes red

The socket is switched oﬀ for the following reasons.

Excessive current.

Low state of charge of the battery.

Overheating of the socket.

▶

Technical data

The holder is for ﬁxing a tablet with a height of min.

12.2 cm and max. 19.5 cm.

If the reasons given above no longer apply and the

socket is still not switched on automatically, dis-

connect the connected consumer from the socket

and reconnect after a short time.

›

The maximum load for the holder is 0.75 kg.

12-Volt power socket

Operating conditions

Storage compartment with air outlet

nozzle

NOTICE

Risk of damage to the electrical system of the vehi-

cle!

Storage compartment with air outlet nozzle

Use the sockets only for the connection of ap-

proved electrical accessories with a total power

consumption of up to 120 watts.

▶

In the compartment, there is a card holder and a pen

holder.

The maximum load for the compartment is 3 kg.

NOTICE

Turn the knob in the compartment to position to

open the air outlet nozzle.

›

Danger of damage to the connected consumers!

Switch oﬀ the consumers before switching the ig-

nition on or oﬀ and before starting the engine.

▶

230-Volt power socket

Functionality

NOTICE

Danger of damage to the connected consumers!

Do not connect a light with ﬂuorescent lamp to the

▶

socket.

Switch oﬀ the consumers before switching the ig-

nition on or oﬀ and before starting the engine.

▶

Status display

Lit up in green - the socket is switched on.

▶

Blinking green - the socket is still switched on for

about 10 minutes after the engine has been

switched oﬀ, if a consumer was connected before

the engine was switched oﬀ.

▶

The socket has a child safety lock. When insert-

ing the plug, the fuse is unlocked and the socket is

switched on.

Storage space and interior equipment for Your Skoda Kodiaq SUV 2020

Popular Manuals