Get Storage space and interior equipment -> Sliding hooks Guide for Skoda Kodiaq SUV 2020

Storage space and interior equipment › Sliding hooks 219

Before installing the net partition behind the sec-

ond row of seats, fold forward the third row of

seats.

›

Sliding hooks

Settings

› ^{Insert the crossbar into the mount}A on one side

Moving

and push it forwards.

Releasing

Moving

Attach the bar to the other side in the same way.

›

› ^{Snap the carabiners}B into the lashing eyes.

› ^{Pull the straps ﬁrmly at the free ends}C .

Applying

Fasten at the front

The procedure is analogous to the process behind.

The lashing eyes for the carabiners are located under

the central body pillars.

Loosen

Removal

Loosening takes place in the reverse order to fasten-

ing.

Move the hook into the

front area of the ﬁxing

strip and remove it.

›

Double-sided ﬂoor covering

Overview

Depending on the equipment, the vehicle may be

equipped with a double-sided ﬂoor covering in the

luggage compartment. One side is made of fabric,

the other side is washable.

Inserting hook

Press the hook against

the front part of the

ﬁxing strip and fold it

down to the stop.

Floor covering in the boot

Folding up and folding down

The maximum load for the hook is 7.5 kg.

Net partition

NOTICE

Fasten the net partition

Fasten at the back

Before closing the boot lid, remove the hook from

the frame.

220 Storage space and interior equipment › Roll-up luggage compartment cover

Insert the cover into

the recesses of the

side panel.

›

Roll-up luggage compartment cover

Operation

Extending

Close the side pockets.

›

Restore the original

position of the variable

loading ﬂoor.

Pull out the cover on

the handle until it clicks

into place.

›

Variable loading ﬂoor in the boot

Setting the position

The maximum load of the rear plate in the upper po-

sition is 25 kg. The maximum load of both plates in

the upper position is 75 kg in total.

Retracting

Press the cover in the

handle area.

›

Five-seater version of the vehicle – the variable load-

ing ﬂoor consists of two parts.

The cover rolls up.

It is possible that the

cover rolls more slowly

during winter weather

conditions.

Seven-seater verison of the vehicle – the variable

loading ﬂoor consists of one part.

For vehicles with a two-part variable loading

ﬂoor, one side of the rear panel may be made of fab-

ric and the other side may be washable.

In vehicles with an emergency wheel or vehicle

battery under the ﬂoor covering in the luggage com-

partment, the variable loading ﬂoor cannot be adjus-

ted to the lower position.

For vehicles with an emergency wheel under the

ﬂoor covering in the luggage compartment, the max-

imum load on the ﬂoor covering is 5 kg.

Removing and inserting

Take out and insert the roll-up cover

Press the end of the

›

crossbar and take out

or insert the cover.

Set the variable loading ﬂoor to the upper or lower

position

The front and rear plates of the variable load ﬂoor

can be adjusted to the upper or lower position. The

handling of the two panels is identical.

Lift the variable load

ﬂoor and pull it to-

›

wards you.

Stowing the cover under the variable loading ﬂoor

Applicable to the seven-seater variant of the vehicle.

Open the side pockets.

›

Storage space and interior equipment › Partition in the boot 221

To set in the upper po-

›

Partition in the boot

Removing and inserting

Remove the partition

sition, place the varia-

ble loading ﬂoor in the

front area on area A .

To set in the lower po-

sition, place the varia-

ble loading ﬂoor in the

front area on space B .

Press the variable load-

ing ﬂoor forward and

hang up.

›

Vehicle version: Five-seater/seven-seater

The partition prevents the cargo from slipping.

Remove the partition upwards.

›

Dividing the boot

Through-loading bag

Insert and lock

Lift the rear plate of

the variable loading

ﬂoor.

Push the plate into the

grooves A .

›

In the bag, a max. of 2 pairs of skis with poles can be

transported.

Fold the middle rear seat back forward. Where ap-

plicable, fold down the third row of seats.

›

Push the skis and poles with the tips backwards in-

to the bag and secure the bag.

›

The bag can be shortened in relation to the length

of the ski by means of a band attached inside the

bag.

Place the empty bag in the opening in such a way

that the end of the bag with the zip is in the boot.

Fold the front plate up and back

Lift the plate. The plate

is inserted into the

›

grooves A .

Tighten the drawstring

around the skis on the

base of the binding.

›

Folding it back takes

place in reverse order.

›

Insert the belt tongue

into the buckle of the

middle seat.

›

Storage space and interior equipment -> Sliding hooks for Your Skoda Kodiaq SUV 2020

Popular Manuals