Wheels -> Snow chains for Your Skoda Kodiaq SUV 2020

Wheels › All-season or winter tires 209  
Conditions of use  
WARNING  
Risk of accident!  
Do not use worn tires.  
If all-season or winter tires are used that have a low-  
er speed category than the actual maximum speed  
of the vehicle, then proceed as follows.  
Tire manufacturing date  
The date of manufacture is indicated on the tyre  
sidewall.  
Set the speed limit in the Infotainment according  
to the category of the fitted tires.  
For example, DOT ... 10 19 means that the tire was  
manufactured in the 10th week of 2019.  
In the driver's field of view, affix a warning label  
with the maximum value of the speed category in-  
tended for the tyres fitted (applies only to certain  
countries).  
WARNING  
Risk of accident!  
Do not use tires that are older than 6 years.  
Settings  
Troubleshooting  
The speed limit setting for tyres is set in the Infotain-  
ment in the following menu item.  
Help with a flat tire  
Spare wheel and emergency spare  
wheel » page 210.  
Changing the wheel and raising the vehi-  
cle » page 210.  
Breakdown set » page 212.  
Or:  
Snow chains  
Usage  
Stop the vehicle.  
Check the tires and tire pressures.  
The snow chains improve driving in wintry road con-  
ditions.  
Show tires with changed pressure  
In the following menu, select the menu item for dis-  
playing the tyre condition.  
WARNING  
Risk of accident as well as tyre damage!  
Do not use chains on routes that are free from  
snow and ice.  
Or:  
What you should be mindful of  
Before fitting the snow chains, remove the full  
wheel trims.  
Only mount the snow chains on the front wheels.  
All-season or winter tires  
Usage  
All-season or winter tyres improve handling in winter  
weather conditions. They are characterised by ‘M+S’  
Technical specifications  
and a mountaintop and snowflake symbol  
.
Permitted rim / tire combinations for the installation  
of the snow chains.  
What you should be mindful of  
Rim size  
Wheel size  
215/65 R17  
6.5Jx17 ET38  
For the best possible handling, use tyres on all four  
wheels with a minimum tread depth of 4 mm.  
Only use snow chains with links and locks no larger  
than 13 mm.  
Change winter tyres to summer tyres at the appro-  
priate time. Summer tyres have better driving and  
braking characteristics on snow- and ice-free roads  
and at temperatures above 7 °C.  
SEAL tyres  
Usage  
The SEAL tyres have increased resistance to air leak-  
age when punctured.  
210 Wheels Spare and emergency spare wheel  
When replacing SEAL tyres with standard tires, the  
vehicle must have one of the following pieces of  
equipment.  
Remove the wheel on vehicles with sound  
system and replace  
Remove  
Spare or emergency spare wheel with correspond-  
ing tool for replacing it.  
Partially pull out the  
securing tab A .  
Breakdown kit.  
Press the safety button  
and pull out the plug.  
Spare and emergency spare wheel  
Overview  
Spare wheel  
The dimensions of a full-featured spare wheel cor-  
respond to the dimensions of the wheels installed  
on the vehicle.  
A temporary spare wheel is provided with a warn-  
ing label on the rim. This wheel is intended to ena-  
ble you to reach the nearest specialist garage.  
Unscrew the lock nut.  
Take out the bass  
speaker.  
Take out the wheel.  
Inflate a space saver wheel with the maximum pre-  
scribed pressure.  
Emergency wheel  
A warning label is displayed on the rim of the tempo-  
rary spare wheel. This wheel is intended to enable  
you to reach the nearest specialist garage.  
Insertion  
Insert the wheel into the wheel well with the out-  
side facing downwards.  
An emergency wheel is significantly narrower than  
the wheels mounted ex-factory.  
Insert the bass speaker.  
Screw in the locknut until it stops.  
Insert the plug into the bass speaker.  
Remove and insert the wheel on vehicles  
without a sound system  
Secure securing tab A .  
The spare wheel or emergency wheel is mounted in a  
recess under the floor covering or the variable load-  
ing floor in the boot.  
Changing the wheel and raising the  
vehicle  
Remove  
What you should be mindful of  
Loosen the retaining  
belt and take out the  
box with the tool kit.  
Unscrew the lock nut.  
Take out the wheel.  
Before changing  
Park the vehicle safely and secure it against rolling  
away.  
Turn off the engine.  
Let all passengers get out. During the wheel  
change they should not stand on the road, e.g. be-  
hind the crash barriers.  
Close all doors, the luggage compartment and en-  
gine compartment flaps.  
Insertion  
If a trailer is coupled, uncouple it.  
Insert the wheel into the wheel well with the out-  
side facing downwards.  
Pull the fixing band through the opposite holes in  
the wheel rim.  
Screw in the locknut until it stops.  
Replace the box with the tool kit into the wheel  
and secure it with the tape.