210 Wheels › Spare and emergency spare wheel
When replacing SEAL tyres with standard tires, the
vehicle must have one of the following pieces of
equipment.
Remove the wheel on vehicles with sound
system and replace
Remove
Spare or emergency spare wheel with correspond-
ing tool for replacing it.
▶
Partially pull out the
securing tab A .
›
Breakdown kit.
▶
Press the safety button
and pull out the plug.
›
Spare and emergency spare wheel
Overview
Spare wheel
The dimensions of a full-featured spare wheel cor-
respond to the dimensions of the wheels installed
on the vehicle.
A temporary spare wheel is provided with a warn-
ing label on the rim. This wheel is intended to ena-
ble you to reach the nearest specialist garage.
▶
Unscrew the lock nut.
Take out the bass
speaker.
Take out the wheel.
›
›
▶
›
Inflate a space saver wheel with the maximum pre-
scribed pressure.
Emergency wheel
A warning label is displayed on the rim of the tempo-
rary spare wheel. This wheel is intended to enable
you to reach the nearest specialist garage.
Insertion
Insert the wheel into the wheel well with the out-
side facing downwards.
›
An emergency wheel is significantly narrower than
the wheels mounted ex-factory.
Insert the bass speaker.
Screw in the locknut until it stops.
Insert the plug into the bass speaker.
›
›
Remove and insert the wheel on vehicles
without a sound system
›
› Secure securing tab A .
The spare wheel or emergency wheel is mounted in a
recess under the floor covering or the variable load-
ing floor in the boot.
Changing the wheel and raising the
vehicle
Remove
What you should be mindful of
Loosen the retaining
belt and take out the
box with the tool kit.
Unscrew the lock nut.
Take out the wheel.
›
Before changing
Park the vehicle safely and secure it against rolling
away.
›
›
›
Turn off the engine.
Let all passengers get out. During the wheel
change they should not stand on the road, e.g. be-
hind the crash barriers.
›
›
Close all doors, the luggage compartment and en-
gine compartment flaps.
›
Insertion
If a trailer is coupled, uncouple it.
›
Insert the wheel into the wheel well with the out-
›
side facing downwards.
Pull the fixing band through the opposite holes in
the wheel rim.
›
Screw in the locknut until it stops.
Replace the box with the tool kit into the wheel
and secure it with the tape.
›
›
