Illumination brightness control 167
& Combination meter settings
Meter and vehicle settings can be set on
the combination meter display (color
LCD). Refer to “Menu screens” �P199.
NOTE
3-5. Illumination brightness
control
.
When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the
automatic dimming function does
not work at all.
.
The brightness setting is not can-
celed even when the ignition switch
is turned to the “LOCK”/“OFF” posi-
tion.
& Auto dimmer cancel function
When the ambient light is bright, the
illumination brightness is set to the max-
imum regardless of the position of the
control dial. In this case, you cannot adjust
the illumination brightness by using the
control dial. When the ambient light is dark,
you can dim the illumination brightness as
described above.
The illumination brightness of the instru-
ment panel illuminates under the following
conditions.
.
The light switch is in the “
position when the ambient light is dark.
” or “
”
The operational/non-operational setting
and sensitivity of the auto dimmer cancel
function can be changed by your SUBARU
dealer. Contact your SUBARU dealer for
details.
.
The light control switch is in the “AUTO”
position and the headlights illuminate
automatically.
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
