Get Instruments and controls -> Multi-function display Guide for Subaru Forester SUV 2024

^{Multi-function display (black and white)}201

! How to change the information dis-

NOTE

3-8. Multi-function display

(black and white)

play

The indicated values vary in accor-

dance with changes in the vehicle’s

running conditions. Also, the indicated

values may differ slightly from the

actual values and should thus be

treated only as a guide.

NOTE

For models with multi-function display

(color LCD), refer to “Multi-function

display (color LCD)” �P205.

& Driving information display

NOTE

You can set the units for both the multi-

function display (black and white) and

the combination meter at the same

time. For details about setting the

language and units, refer to “Menu

screens” �P199.

1

INFO button

Pressing the INFO button on the steering

wheel switches changes the display to the

following sequence.

1

2

3

4

Outside temperature indicator

X-MODE indicator (if equipped)

Driving information display

Clock

With the ignition switch in the “ACC”

position, the clock appears on the display.

With the ignition switch in the “ON” posi-

tion, the outside temperature indicator,

driving information display and clock all

appear on the display.

– CONTINUED –

Multi-function display (black and white)

202

the average rate of fuel consumption.

! Average fuel consumption

! Driving range on remaining fuel

1

2

When setting the displayed unit as MPH

When setting the displayed unit as km/h

1

Displays the driving range per gallon of

fuel

2

3

Displays the driving range per liter of fuel

Displays the fuel consumption per 100

km

If the driving range is shown as “

is only a tiny amount of fuel left in the tank.

”, there

NOTE

This display shows the average rate of fuel

consumption since the trip meter was last

reset.

The driving range on the remaining fuel

is only a guide. The indicated value may

differ from the actual driving range on

the remaining fuel, so you must im-

mediately fill the tank when the low fuel

warning light illuminates.

1

2

When setting the displayed unit as MPH

When setting the displayed unit as km/h

The driving range indicates the distance

that can be driven taking into account the

amount of fuel remaining in the tank and

^{Multi-function display (black and white)}203

! Average vehicle speed

! Current fuel consumption

1

TRIP RESET switch

1

2

When units in miles is selected

When units in km is selected

1

Displays the driving range per gallon of

fuel

Displays the driving range per liter of fuel

Displays the fuel consumption per 100

km

Press the TRIP RESET switch to switch

between the displays for the average fuel

consumption that corresponds to the A trip

meter mileage and the average fuel con-

sumption that corresponds to the B trip

meter mileage.

When the trip meter displays is reset, the

corresponding average fuel consumption

value is also reset.

2

3

This display shows the average vehicle

speed since the trip meter was last reset.

Pressing the TRIP RESET switch toggles

the display between the average vehicle

speed corresponding to the A trip meter

display and the average vehicle speed

corresponding to the B trip meter display.

This indication shows the rate of fuel

consumption at the present moment.

When either of the trip meter displays is

reset, the corresponding average vehicle

speed value is also reset.

NOTE

When the trip meter display is reset, the

average fuel consumption correspond-

ing to that trip meter display is not

shown until the vehicle has subse-

quently covered a distance of 1 mile

(or 1 km).

NOTE

When either trip meter display is reset,

the average vehicle speed correspond-

ing to that trip meter display is not

shown until the vehicle has subse-

– CONTINUED –

Multi-function display (black and white)

204

quently covered a distance of 1 mile (or

1 km).

when passing through a tunnel)

– When starting the engine after

being parked for a certain period

of time

The temperature unit cannot be

changed.

& Outside temperature indica-

tor

! Turn off display of driving informa-

tion display

.

Select the blank space in the menu to exit

the driving information display selection.

! Road surface freeze warning indi-

NOTE

cation

.

The average fuel consumption and

average vehicle speed are calcu-

lated even while the driving informa-

tion display is not displayed.

.

Even if you turn off the driving

information display, the display will

automatically turn on when the bat-

tery voltage is disconnected and

then reconnected for battery repla-

cement or fuse replacement.

1

2

U.S.-spec. models

Except U.S.-spec. models

NOTE

.

The outside temperature indicator

shows the temperature around the

sensor. However, the temperature

may not be indicated correctly or

the update may be delayed in the

following conditions.

1

2

U.S.-spec. models

Except U.S.-spec. models

When the outside temperature drops to a

certain temperature or lower, the tempera-

ture indication flashes for 5 seconds to

show that the road surface may be frozen.

If the display is already indicating that the

outside temperature is low when the

ignition switch is turned to the “ON”

position, the indication does not flash.

– While parking or driving at low

speeds

– When the outside temperature

changes suddenly (example:

when going in and out of an

underground parking area or

^{Multi-function display (color LCD)}205

& Features

The multi-function display (color LCD) has

the following functions.

NOTE

3-9. Multi-function display

(color LCD)

The outside temperature indication

may differ from the actual outside

temperature. The road surface freeze

warning indication should be treated

only as a guide. Be sure to check the

condition of the road surface before

driving.

NOTE

Description

Page

Displays useful messages, such

as notification, etc.

For models with multi-function display

(black and white), refer to “Multi-func-

tion display (black and white)” �P201.

207

Displays basic screens (e.g. fuel

consumption screen, etc.)

207

226

Sets and adjusts maintenance

notification

WARNING

& X-MODE indicator (if

equipped)

Always pay adequate attention to

safe driving when operating the

multi-function display (color LCD)

while the vehicle is in motion. When

operation of the multi-function dis-

play (color LCD) is disturbing your

awareness and ability to concen-

trate on driving, stop the vehicle in

a safe place before performing op-

erations on the screen. Also, do not

concentrate on the display while

driving. Doing so may cause you to

look away from the road and could

result in an accident.

Also, the multi-function display (color LCD)

can also be used to set and initialize the

multi-function display (color LCD) itself.

This indicator will be shown while X-MODE

is activated. It will turn off when X-MODE is

deactivated.

NOTE

& Clock

For details about clock setting, refer to

“Clock” �P228.

.

When the vehicle is in motion,

certain functions and selections

may not be available.

You can set the language and units

for both the multi-function display

(color LCD) and the combination

meter at the same time. For details

about setting the language and

units, refer to “Menu screens”

�P199.

.

The images displayed in this Own-

er’s Manual are sample images. The

actual image may vary depending on

the market and vehicle specifica-

tions.

– CONTINUED –

Multi-function display (color LCD)

206

When the checks are performed, the color

of the icon corresponding to the checked

item will change.

If there is a notification, the message will

be displayed. Take the appropriate actions

based on the message indicated.

After the self-check is completed, today’s

date, the stored birthday or the stored

anniversary is displayed.

& Welcome screen

When the driver’s door is opened and

closed, the welcome screen will appear for

a short time.

& Self-check screen

NOTE

When the setting is “On”, the self-

check screen appears. For details

about this setting, refer to “On/Off

setting” �P226.

NOTE

.

The welcome screen will disappear

when the ignition switch is turned to

the “ON” position while the welcome

screen is displayed.

When the ignition switch is turned to the

“ON” position, the vehicle self-check will

be performed. The screens corresponding

to the following items will appear one after

another for several seconds each.

NOTE

.

The welcome screen can be set to on

or off. For details, refer to “Screen

Settings” �P199.

For a certain period of time after the

welcome screen has once appeared,

it may not appear again even when

the driver’s door is opened and

closed again. This does not indicate

a malfunction.

.

After performing the maintenance,

change the setting of the corre-

sponding maintenance item. For de-

tails, refer to “Maintenance settings”

�P226.

.

The maintenance notification screen

will be displayed under either of the

following conditions.

– The period of time remaining until

the registered notification date is

15 days or less.

– The total driving distance remain-

ing until the registered notifica-

tion distance is approximately

311 miles (500 km) or less.

The maintenance notification screen

will be displayed until either of the

following conditions is satisfied.

– The period of time passed after

the registered notification date is

15 days or more.

1

2

Engine oil: Checks the interval of engine

oil replacement.

Oil filter: Checks the interval of oil filter

replacement.

Tires: Checks the interval of tire rotation.

Inspection and maintenance: Checks the

interval of inspection and maintenance.

.

3

4

^{Multi-function display (color LCD)}207

– The total distance driven after the

registered notification distance

is approximately 311 miles (500

km) or more.

& Basic operation

& Basic screens

& Interruption screen

Control switch

1

2

3

4

INFO button

/SET

Example

Press the INFO button on the steering

wheel to switch the item displayed on the

basic screen. You can operate the items

on the setting screen by using the “ ”,

Useful messages, such as reminder in-

formation, weather information (if

equipped) and traffic information (if

equipped) may interrupt the current screen

and appear on the display accompanied

by a beep. Take proper action according to

the message.

“

” and “ /SET” switches.

1

2

3

4

Clock

Climate control*

Outside temperature

Information screen

The interruption screen will return to the

original screen after a few seconds. Also,

you can press the INFO button to skip the

interruption screen.

– CONTINUED –

Multi-function display (color LCD)

208

*: This is not displayed on the multi-function

display (color LCD) when the ignition switch

is in the “ACC” position.

control panel” �P261.

! Clock

! Climate control screen

The climate control status is displayed on

the multi-function display (color LCD).

The clock can be displayed in either 12-

hour display or 24-hour display. For details

about the setting, refer to “Clock” �P228.

While the ignition switch is in the “ACC” or

“ON” position, the basic screen will be

displayed.

! Outside temperature indicator

The outside temperature is displayed on

the multi-function display (color LCD).

NOTE

.

The outside temperature indicator

shows the temperature around the

sensor. However, the temperature

may not be indicated correctly or

the update may be delayed in the

following conditions.

Climate control screen

1

2

3

4

5

Set temperature indicator (left-hand side)

FULL AUTO indicator

AUTO indicator

– While parking or driving at low

speeds

– When the outside temperature

changes suddenly (example:

when going in and out of an

underground parking area or

when passing through a tunnel)

– When starting the engine after

being parked for a certain period

of time

Airflow mode indicator

Set temperature indicator (right-hand

side)*¹

6

7

8

9

Air inlet selection indicator

SYNC indicator*¹

Fan speed indicator

Air conditioner ON indicator

*1: Models with the SYNC function only

.

The temperature unit cannot be

changed.

When operating the climate control sys-

tem, the basic screen switches to the

climate control screen. For details about

climate control operation, refer to “Climate

^{Multi-function display (color LCD)}209

! Information screen

Press the INFO button on the steering wheel to switch the item displayed on the information screen.

Content

Description

Displays the operating status of the electric components and equipment.

Displays the status of your vehicle.

Page

210

211

212

213

214

Electric components operating status screen*¹

Prevention safety screen

EyeSight screen

Displays the operating status of EyeSight.

Displays up to 3 optional items.

Favorite screen

Weather information screen*²

Traffic information*²/Navigation*³screen

Audio screen*³

Displays weather information.

Displays information linked with the navigation system.

Displays audio system information.

Fuel consumption screen

Clock/date screen

Displays fuel consumption information.

Displays the clock.

Guidance screen

Moves to the setting screen.

*1: If equipped

*2: Models with SiriusXM Satellite Radio

*3: Models with navigation system

– CONTINUED –

Multi-function display (color LCD)

210

3. Pull the “ /SET” switch to enter the

selected item.

! Electric components operation

screen (if equipped)

NOTE

.

Indicators do not display for func-

tions that are not equipped to the

vehicle.

.

The indicators of functions that are

not operating are displayed in gray.

! Prevention safety screen

X-MODE screen

1

2

Vehicle posture

X-MODE

1

2

BSD/RCTA*

Reverse Automatic Braking (RAB) sys-

tem*

Lane Departure Warning indicator

Pre-Collision Braking System indicator*

High beam assist

Front view monitor*

Driver Monitoring System*

This screen displays the driving status of

the vehicle and the operation status func-

tions. For functions that are operating, the

indicator will illuminate or flash.

3

4

5

6

7

NOTE

.

The vehicle posture indication may

differ from the actual vehicle pos-

ture.

When X-MODE has turned on, the

screen of the multi-function display

is switched to the prevention safety

screen.

The vehicle posture angle varies not

only due to the angle of the road

surface, but also due to the vehicle

*: If equipped

1

2

3

4

Telltale screen

Steering angle

Vehicle posture

Running condition

This screen displays the electric compo-

nents operation status of the vehicle.

1. Press and hold the “INFO” button to

enter the menu screen.

2. Operate the “ ” or “ ” button to

select the preferred item.

.

^{Multi-function display (color LCD)}211

tilt caused by the occupants, cargo,

and acceleration or deceleration.

Item

Details

! Favorite screen

The engine coolant temperature is

displayed.

! EyeSight screen

The engine oil temperature is

displayed.

The average vehicle speed is

displayed.

The accelerator opening ratio is

displayed.

Favorite screen (display example)

This screen displays up to three optional

pieces of information that can be selected

from the following items.

1

2

3

4

5

6

7

Lead vehicle indicator

Your own vehicle indicator

Stop lights

Road line indicator

Lane indicator

The vehicle posture is displayed.

The current rate of fuel consump-

tion is displayed.

Lane Centering indicator

Steering wheel indicator

This screen displays the status of the

EyeSight system. The lead vehicle indica-

tor moves forward and backward depend-

ing on the distance with the vehicle in front.

For details, refer to the Owner’s Manual

supplement for the EyeSight system.

The direction of the vehicle is

displayed.*¹

The weather information is dis-

played.*²

– CONTINUED –

Multi-function display (color LCD)

212

Item

Details

.

The weather forecast for the set

destination remains displayed until

a new destination is set or until you

reach the destination.

Depending on the reception timing

of XM, the display of weather infor-

mation may be delayed.

! Weather information screen (if

equipped)

The posted speed limit of the road

you are currently driving on is

displayed.*¹

The calendar is displayed.

! Navigation screen (models with

navigation system)

Driver Monitoring System infor-

mation is displayed.*¹

Nothing is displayed.

1

2

Weather information for the destination*

Weather information for the current loca-

tion

*1: If equipped

*2: Models with SiriusXM Satellite Radio

*: Only when a destination is set in the

navigation system

NOTE

The weather information is displayed on

the screen.

Some displayed items may not be

displayed depending on the model

and specifications.

The navigation system information to the

destination is displayed on the screen.

NOTE

The items shown in the favorite screen can

be changed. For details, refer to “Favorite

setting” �P223.

.

When all of the following conditions

are satisfied, weather information is

displayed.

NOTE

When a destination is not set in the

navigation system, the compass orien-

tation, name, route sign and speed limit

of the road the vehicle is traveling on

remain displayed on the screen.

– The vehicle is equipped with an

audio and navigation system for

SiriusXM satellite radio.

– You have a current SiriusXM

satellite radio subscription.

^{Multi-function display (color LCD)}213

warning light illuminates.

! Audio screen

! Fuel consumption screen

! Clock/date screen

1

2

Driving range on remaining fuel

Average fuel consumption corresponding

to the driving distance of each trip meter

Current fuel consumption

User information (if equipped)

The screen of the currently selected audio

source is displayed.

For details about how to use the audio set,

refer to the separate navigation/audio

Owner’s Manual.

The time and date are displayed.

You can adjust the time and date. For

details, refer to “Clock” �P228.

3

4

The fuel consumption information is dis-

played on the screen.

If the driver is recognized by the Driver

Monitoring System, average fuel con-

sumption for the driver will be displayed.

NOTE

The driving range on the remaining fuel

is only a guide. The indicated value may

differ from the actual driving range on

the remaining fuel, so you must im-

mediately fill the tank when the low fuel

– CONTINUED –

Multi-function display (color LCD)

214

& Setting screen

! Guidance screen

1. Press and hold the INFO button on the

guidance screen. The top menu is

displayed.

2. Operate the “ ” or “ ” switch to

select the preferred menu from the

top menu.

3. Pull the “ /SET” switch to enter the

selected menu.

4. Operate the “ ” or “ ” switch to

select the preferred menu from the

2nd menu.

5. Pull the “ /SET” switch to enter the

selected menu.

NOTE

When the combination meter display

(color LCD) is displaying the menu

screen entering screen, the system will

not move to the setting screen even if

the INFO button is pressed and held.

When the INFO button on the steering

wheel is pressed and held on this screen,

the setting screen can be displayed.

For details, refer to “Setting screen”

�P214.

^{Multi-function display (color LCD)}215

The menu lists are as follows.

Items that can be set when stopped:

Top menu

2nd menu

Description

Page

217

—

Birthday

Set a birthday.

Date

Anniversary

Set an anniversary day.

Return to the 1st menu.

Perform the user recognition.

Go Back

Repeat facial scan

User Recognition

Yes or No

217

222

Turn the user recognition settings on or off.

On or Off

Turn the automatically retract seat on entry

function on or off.

Automatically retract seat on entry

Register User

222

Register the user.

218

221

222

220

221

—

Driver Moni-

toring System Update User Settings

Delete Driver Position

Delete User

Re-register the driver’s position.

Delete the registered driver’s position.

Delete the registered user.

Delete the registered all user.

Return to the 1st menu.

Delete All Users

Go Back

Yes or No

Screen Off*

Turn the screen off.

223

224

—

Favorite

Set and customize the triple meter.

Set the bypass screen for each item.

Adjust the beep sound volume.

Return to the 1st menu.

Display/Beep Bypass Screen

Beep

On or Off

High, Low or Off

Go Back

Set the operation of the automatic climate

control.

Mode Setting

Climate Con-

Normal, Mild, ECO or Power

On or Off

224

Set the operation of the climate control depend-

ing on passenger.

trol

Occupant Detection

224

—

Go Back

Return to the 1st menu.

– CONTINUED –

Multi-function display (color LCD)

216

Top menu

2nd menu

Description

Set and adjust the brightness of a display.

Page

225

—

Brightness

Contrast

Set and adjust the contrast of a display.

Set the camera shift link.

Camera Set-

tings

Camera Shift Link

Go Back

On or Off

Return to the 1st menu.

Engine Oil

Set and adjust the oil maintenance notification date.

Set and adjust the oil filter maintenance notification date.

Set and adjust the tire maintenance notification date.

Set and adjust the vehicle maintenance notification date.

226

Oil Filter

Tires

Maintenance Schedule

Maintenance

Turn on or off the self-check screen that is

activated when the ignition switch is turned to the On or Off

“ON” position.

ON/OFF

226

Clear All Settings

Clear all settings for maintenance items.

Return to the 1st menu.

Yes or No

227

—

Go Back

Initialize

Go Back

—

Reset all settings to the default settings.

Return to the setting screen.

Yes or No

227

—

*: You can also set this while driving.

Items that can be set while driving:

Menu

Description

Page

Screen Off

Go Back

Turn the screen off.

Return to the settings screen.

Yes or No

223

—

For safety reasons, we recommend stopping the vehicle in a safe location while setting.

^{Multi-function display (color LCD)}217

4. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen

without applying the setting changes.

! Date and time settings

You can set the date, time and 12h or 24h

format settings.

! Current date and time setting

For details about clock setting, refer to

“Clock” �P228.

NOTE

You can store a maximum of 5 birth-

days.

! Birthday setting

! Anniversary setting

If a birthday or anniversary is approaching,

a message will be displayed when the

ignition switch is turned to the “ON”

position. This function can be set to on or

off. For details, refer to “Bypass screen

setting” �P223.

1. Select “Birthday” from the 2nd menu in

the setting screen. Refer to “Setting

screen” �P214.

The procedure for setting an anniversary is

the same as “Birthday setting” �P217,

except that in step 1 “Anniversary” is

selected.

2. Select from the list the number that you

want to register.

NOTE

You can store a maximum of 5 anniver-

saries.

! Driver Monitoring System settings

You can set the Driver Monitoring System

settings.

! Repeat facial scan

1. Select “Repeat facial scan” from the

2nd menu in the settings screen. Refer

to “Setting screen” �P214.

3. Enter the date and the text by using the

control switches.

– CONTINUED –

Multi-function display (color LCD)

218

! Register User

1. Adjust the seat position, outside mirror

angle, and reverse tilt-down outside

mirror angle so that you are seated in

the correct driving posture.

NOTE

.

Start the user registration after ad-

justing the seat position, outside

mirror angle, and reverse tilt-down

outside mirror angle. If they are

adjusted during user registration, it

may be disrupted. Refer to “Power

seat” �P34 or “Outside mirrors”

�P252.

When user recognition is completed, the

Hello screen appears and the screen then

switches to the basic screen associated

with the user information.

2. Select “Yes” to start the repeat facial

scan. Select “No” to return to the

previous screen.

3. While seated in the driver’s seat, face

straight forward and wait for a few

moments.

.

If the ignition switch is turned to the

“OFF” position before user registra-

tion is complete, the information of

the adjusted seat position, outside

mirror angle, and reverse tilt-down

outside mirror angle will not be

saved.

2. Select “Register User” from the 2nd

menu in the settings screen. Refer to

“Setting screen” �P214.

^{Multi-function display (color LCD)}219

5. While seated in the driver’s seat, face

straight forward and wait for a few

moments.

3. Select from the list the number that you

want to register.

When the screen changes, the registration

facial scan is completed.

A

Forward direction

Display direction

Face forward.

Do not lower your chin.

Face the display.

B

1

2

3

4. Select “Set” to start the registration

facial scan. Select “Go Back” to return

to the previous screen.

*: Display

– CONTINUED –

Multi-function display (color LCD)

220

.

When “User Recognition” is set to

OFF, user registration cannot be

selected.

NOTE

.

If user registration cannot be per-

formed, turn your face forward as

shown in the illustration, then turn to

the display.

! Delete User

.

If “Unable to register” appears, re-

peat the procedure beginning from

step 4.

There are some cases where user

registration cannot be registered

properly. In those cases, refer to

“Driver Monitoring System” �P379.

1. Select “Delete User” from the 2nd

menu in the settings screen. Refer to

“Setting screen” �P214.

NOTE

.

A screen recommending user regis-

tration appears at the following

times.

– When the driver has not com-

pleted user registration

– When there are 4 or fewer regis-

tered users

Operate the control switch and

select “Yes” to display the screen

in step 3. Then follow the registra-

tion procedure to complete user

registration.

An existing user can be overwritten

by selecting a registered number.

When a user is registered by over-

writing, the individual fuel economy

data is reset.

2. Select from the list the number that you

want to register.

6. Enter the text using the control

switches.

7. Set the desired icons using the control

switches.

.

8. Select “Set” to exit the settings screen.

^{Multi-function display (color LCD)}221

! Delete All Users

! Update User Settings

1. Select “Delete All Users” from the 2nd

menu in the settings screen. Refer to

“Setting screen” �P214.

1. Select “Update User Settings” from the

2nd menu in the settings screen. Refer

to “Setting screen” �P214.

3. Select “Yes” to delete the number.

Select “No” to return to the previous

screen.

2. Select “Yes” to delete all the users.

Select “No” to return to the previous

screen.

2. Select “Set” to re-register the driver

position. Select “Go Back” to return to

the previous screen.

NOTE

.

Start the user registration after ad-

justing the seat position, outside

mirror angle, and reverse tilt-down

outside mirror angle. If they are

adjusted during user registration, it

may be disrupted. Refer to “Power

seat” �P34 or “Outside mirrors”

�P252.

– CONTINUED –

Multi-function display (color LCD)

222

.

If the ignition switch is turned to the

“OFF” position before user registra-

tion is complete, the information of

the adjusted seat position, outside

mirror angle, and reverse tilt-down

outside mirror angle will not be

saved.

! Automatically retract seat on

! User Recognition settings

entry setting

1. Select “User Recognition” from the 2nd

menu in the settings screen. Refer to

“Setting screen” �P214.

1. Select “Automatically retract seat on

entry” from the 2nd menu in the

settings screen. Refer to “Setting

screen” �P214.

! Delete Driver Position

1. Select “Delete Driver Position” from the

2nd menu in the settings screen. Refer

to “Setting screen” �P214.

2. Select “On” or “Off” to turn the User

Recognition settings on or off by using

the control switches.

3. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen.

2. Select “On” or “Off” to turn the auto

entry/exit function on or off by using the

control switches.

3. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen.

2. Select “Yes” to delete the driver posi-

tion. Select “No” to return to the

previous screen.

^{Multi-function display (color LCD)}223

! Display/Beep settings

NOTE

You can set the display settings and

volume settings.

While the screen is off, the screen

switches to the climate control screen

only when the climate control system is

operated.

.

You can display a maximum of the 3

items.

The same item cannot be selected

for the left, center or right location.

Weather information for 3 hours

later or 6 hours later can be dis-

played.

! Screen OFF setting

1. Select “Screen Off” from the 2nd menu

in setting screen. Refer to “Setting

screen” �P214.

! Favorite setting

1. Select “Favorite” from the 2nd menu in

setting screen. Refer to “Setting

screen” �P214.

! Bypass screen setting

1. Select “Bypass Screen” from the 2nd

menu in the setting screen. Refer to

“Setting screen” �P214.

2. Select “Yes” to turn off the screen.

Select “No” to return to the previous

screen.

2. Set the desired items by using the

control switches. For details about

items, refer to “Favorite screen”

�P211.

3. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen

without applying the setting changes.

Restoring the screen

When the INFO button is operated after

the ignition switch is turned to the “ON” or

“ACC” position, the screen will be restored.

The screen will be restored with the basic

screen that was displayed when the

screen was turned off.

2. Select “On” or “Off” to turn the display

of items on or off by using the control

switches.

3. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen

– CONTINUED –

Multi-function display (color LCD)

224

without applying the setting changes.

! Climate Control settings

! Occupant detection settings

You can set the climate control settings.

1. Select “Occupant Detection” from the

2nd menu in the setting screen. Refer

to “Setting screen” �P214.

NOTE

! Mode Setting

Traffic information setting is only dis-

played for the audio unit with SiriusXM

satellite radio.

1. Select “Mode Setting” from the 2nd

menu in the setting screen. Refer to

“Setting screen” �P214.

! Beep setting

1. Select “Beep” from the 2nd menu in the

setting screen. Refer to “Setting

screen” �P214.

2. Select “On” or “Off” to turn the occu-

pant detection on or off by using the

control switches.

3. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen

without applying the setting changes.

2. Select “Normal”, “Mild”, “Power” or

“ECO” by using the control switches.

For details about Mode Setting, refer to

“Automatic climate control customiza-

tion (for type B and C)” �P266.

2. Set the beep volume by using the

control switches.

3. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen

without applying the setting changes.

3. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen

without applying the setting changes.

^{Multi-function display (color LCD)}225

! Camera settings (if equipped)

! Contrast setting

! Camera shift link setting

You can set the front camera display

settings.

1. Select “Contrast” from the 2nd menu in

the setting screen. Refer to “Setting

screen” �P214.

1. Select “Camera Shift Link” from the

2nd menu in the setting screen. Refer

to “Setting screen” �P214.

! Brightness setting

1. Select “Brightness” from the 2nd menu

in the setting screen. Refer to “Setting

screen” �P214.

2. Select the contrast level by using the

control switches.

2. Select “On” or “Off” by using the control

switches.

3. Press the “ /SET” button to confirm

the setting.

3. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen

without applying the setting changes.

2. Select the brightness level by using the

control switches.

3. Press the “ /SET” button to confirm

the setting.

– CONTINUED –

Multi-function display (color LCD)

226

! Maintenance settings

! On/Off setting

NOTE

You can set maintenance reminders.

.

The reminder will be displayed by

either date or distance in accor-

dance with the setting.

Even when either “Day” or “Dis-

tance” are displayed as “_ _” a

pop-up screen will appear.

The reminder will be displayed until

either of the following conditions is

satisfied.

1. Select “On/Off” from the 2nd menu on

the setting screen. Refer to “Setting

screen” �P214.

! Engine oil setting

1. Select “Engine Oil” from the 2nd menu

in the setting screen. Refer to “Setting

screen” �P214.

– The period of time passed after

the registered notification date is

15 days or more.

– The total distance driven after the

registered notification distance

is approximately 311 miles (500

km) or more.

2. Select “On” or “Off” to turn the opening

screen on or off by using the control

switches.

3. Select “Set” to exit settings. Select “Go

Back” to return to the previous screen

without applying the setting changes.

! Oil filter setting

The setting procedure is the same as

“Engine oil setting” �P226, but select the

“Oil Filter” item in step 1.

2. Set the date and distance of the

reminder by using the control switches.

3. Select “Set” to exit settings. Select

“Update” to change the notification

distance to the default value. Select

“Go Back” to return to the previous

screen without applying the setting

changes.

! Tires setting

The setting procedure is the same as

“Engine oil setting” �P226, but select the

“Tires” item in step 1.

! Maintenance schedule setting

The setting procedure is the same as

“Engine oil setting” �P226, but select the

“Maintenance Schedule” item in step 1.

^{Multi-function display (color LCD)}227

! Initialize

& How to get the source code

! Clear setting

using the open source

You can initialize the items that have been

set to your preference.

1. Select “Initialize” from the 2nd menu on

the setting screen. Refer to “Setting

screen” �P214.

1. Select “Clear All Settings” from the 2nd

menu on the setting screen. Refer to

“Setting screen” �P214.

Free/Open Source Software Information

This product contains Free/Open Source

Software (FOSS).

The license information and/or the source

code of such FOSS can be found at the

following URL.

http://www.globaldenso.com/en/open-

source/ivi/subaru/

2. Select “Yes” or “No” by using the

control switches.

2. Select “Yes” or “No” by using the

control switches.

NOTE

You cannot initialize the items if the

Driver Monitoring System is not oper-

ated.

Instruments and controls -> Multi-function display for Your Subaru Forester SUV 2024

Popular Manuals