Keys 113
The valet key fits only the ignition switch
and door locks. You can keep the glove
box locked when you leave your vehicle
and valet key at a parking facility.
2-1. Keys
NOTE
2-2. Keyless access with
push-button start system (if
equipped)
For models with “keyless access with
push-button start system”, refer to
“Keyless access with push-button start
system” �P113.
NOTE
The following access key fobs are pro-
vided with the vehicle.
Locking/unlocking using the remote
keyless entry system can also be con-
trolled with the buttons on the key. For
details, refer to “Remote keyless entry
system” �P130.
The following keys are provided with the
vehicle.
CAUTION
Do not attach a large key holder or
key case to either key. If it bangs
against your knees while you are
driving, it could turn the ignition
switch from the “ON” position to
the “ACC” or “LOCK” position,
thereby stopping the engine.
1
2
Access key fobs
Key number plate
The “keyless access with push-button start
system” allows the following functions to
be performed when the access key fob is
being carried.
& Key number plate
1
2
3
Master keys
Valet key
Key number plate
The key number is stamped on the key
number plate attached to the key set. Write
down the key number and keep it in
another safe place, not in the vehicle. This
number is needed to make a replacement
key if you lose your key or lock it inside the
vehicle. Refer to “Key replacement”
�P129.
.
Locking and unlocking of doors, rear
gate and fuel filler lid (For details, refer
to “Locking and unlocking by holding
the access key fob” �P117.)
These keys can be used in the following
locations.
.
.
.
Ignition switch
Driver’s door
Glove box (except the valet key)
.
Starting and stopping the engine (For
details, refer to “Starting and stopping
– CONTINUED –
