Maintenance and service -> Air cleaner element for Your Subaru Forester SUV 2024

Air cleaner element  
466  
! Changing the coolant  
11-8. Air cleaner element  
It may be difficult to change the coolant.  
Have the coolant changed by your  
SUBARU dealer if necessary.  
WARNING  
The coolant should be changed according  
to the maintenance schedule in the “War-  
ranty and Maintenance Booklet”.  
Do not operate the engine with the  
air cleaner element removed. The air  
cleaner element not only filters in-  
take air but also stops flames if the  
engine backfires. If the air cleaner  
element is not installed when the  
engine backfires, you could be  
burned.  
3. After refilling the reserve tank and the  
radiator, reinstall the cap and check  
that the rubber gaskets inside the  
radiator cap are in the proper position.  
CAUTION  
When replacing the air cleaner ele-  
ment, use a genuine SUBARU air  
cleaner element. If it is not used, it  
will cause a negative effect to the  
engine.  
CAUTION  
.
Be careful not to spill engine  
coolant when adding it. If coolant  
touches the exhaust pipe, it may  
cause a bad smell, smoke, and/or  
a fire. If engine coolant gets on  
the exhaust pipe, be sure to wipe  
it off.  
The air cleaner element functions as a filter  
screen. When the element is perforated or  
removed, engine wear will be excessive  
and engine life shortened.  
.
Do not splash the engine coolant  
over painted parts. The alcohol  
contained in the engine coolant  
may damage the paint surface.  
It is not necessary to clean or wash the air  
cleaner element.  
Air cleaner element 467  
cleaner case (rear) into the slits on the  
air cleaner case (front).  
6. Install in the reverse order of removal.  
& Replacing the air cleaner ele-  
ment  
Replace the air cleaner element according  
to the maintenance schedule in the “War-  
ranty and Maintenance Booklet”. Under  
extremely dusty conditions, replace it  
more frequently. It is recommended that  
you always use genuine SUBARU parts.  
NOTE  
Install the air cleaner element so that  
the surface with “UPR” printed on it  
faces upward.  
3. Remove the air cleaner element.  
4. Clean the inside of the air cleaner case  
(both front and rear) with a damp cloth  
and install a new air cleaner element.  
1. Unsnap the two clips holding the air  
cleaner case (rear).  
2. Open the air cleaner case and pull the  
cover rearward while lifting it up.  
5. To install the air cleaner case (rear),  
insert the three projections on the air