Get Starting and operating -> SI-DRIVE Guide for Subaru Forester SUV 2024

^SI-DRIVE329

insert a screwdriver into the hole, press

the shift lock release button using a

screwdriver, and then move the select

lever.

standstill. This phenomenon does not

indicate a malfunction.

7-8. SI-DRIVE

SI-DRIVE (SUBARU Intelligent Drive)

works to maximize engine performance,

control and efficiency.

This system consists of two modes:

Intelligent (I), Sport (S), and Sport Sharp

(S#). By operating the SI-DRIVE switches,

the character of the power unit changes.

If the select lever does not move after

performing the above procedure, the shift

lock system may be malfunctioning. Con-

tact a SUBARU dealer for an inspection as

soon as possible.

& Driving tips

& Intelligent (I) mode

CAUTION

! For smooth, efficient performance

driving

If the accelerator and brake pedals

are depressed at the same time,

driving torque may be restrained.

This is not a malfunction.

Always apply the foot or parking brake

when the vehicle is stopped in the “D” or

“R” position.

Make sure to apply the parking brake

when parking your vehicle. Do not hold

the vehicle with only the mechanical

friction of the transmission.

Do not keep the vehicle in a stationary

position on an uphill grade by using the

“D” position. Use the brake instead.

The engine may, on rare occasions,

knock when the vehicle rapidly accel-

erates or rapidly pulls away from a

The linear acceleration characteristic of

the Intelligent (I) mode is ideal for normal

driving usage.

The Intelligent (I) mode provides well-

balanced performance with greater fuel

– CONTINUED –

SI-DRIVE

330

efficiency and smooth driveability without

stress. Power delivery is moderate during

acceleration for maximum fuel efficiency.

This is ideal for around-town driving and

situations that do not require full power

output. It provides better control in difficult

driving conditions, such as slippery roads

or loose surfaces, due to gentler throttle

response.

& Sport Sharp (S#) mode (if

& SI-DRIVE switches

Type A SI-DRIVE switches

Type B SI-DRIVE switches

equipped)

! For maximum performance driving

& Sport (S) mode (if equipped)

! For all-around performance driving

For sports-minded drivers, the Sport

Sharp (S#) mode offers an exhilarating

level of engine performance and control.

The throttle becomes more responsive

regardless of the engine speed. Delivering

maximum driving enjoyment, this mode is

ideal for tackling twisting roads and for

merging or overtaking other vehicles on

the freeway with confidence.

The Sport (S) mode provides the engine

power desired by those who want to make

the driving experience their own personal

adventure.

To select the Intelligent (I) mode, press

the “I” switch.

^{Power steering}331

To select the Sport (S) mode, press the

“S” switch.

To select the Sport Sharp (S#) mode,

press the “S#” switch.

7-9. Power steering

CAUTION

When the power steering warning

light is illuminated, there may be

more resistance when the steering

wheel is operated. Drive carefully to

the nearest SUBARU dealer and

have the vehicle inspected immedi-

ately.

& Power steering warning light

NOTE

While the engine is cool, you cannot

change to Sport Sharp (S#) mode.

The next time you turn on the engine,

after you turned off the engine in the

Sport (S) mode (type A) or Sport

Sharp (S#) mode (type B), the

SI-DRIVE mode changes to the In-

telligent (I) mode.

If the CHECK ENGINE warning light/

malfunction indicator light illumi-

nates while the engine is running,

type A changes to the Sport (S)

mode, and type B remains in the

state that was in effect before the

warning light turned on. In this case,

it is not possible to change to

another mode.

NOTE

If the steering wheel is operated in the

following ways, the power steering

control system may temporarily limit

the power assist in order to prevent the

system components, such as the con-

trol computer and drive motor, from

overheating.

& Power steering system fea-

tures

The steering wheel is operated fre-

quently and turned sharply while the

vehicle is maneuvered at extremely

low speeds, such as while frequently

turning the steering wheel during

parallel parking.

The steering wheel remains in the

fully turned position for a long

period of time.

The vehicle is equipped with an electric

power steering system. When the ignition

switch is turned to the “ON” position, the

power steering warning light on the com-

bination meter illuminates to inform the

driver that the warning system is function-

ing properly. Then, if the engine started,

the warning light turns off to inform the

driver that the steering power assist is

operational.

If any of the SI-DRIVE indicators

blink, the SI-DRIVE system may be

malfunctioning. Contact your

SUBARU dealer.

At this time, there will be more resis-

tance when steering. However, this is

not a malfunction. Normal steering

force will be restored after the steering

– CONTINUED –

Starting and operating -> SI-DRIVE for Your Subaru Forester SUV 2024

Popular Manuals