OTHER CONTROLS AND EQUIPMENT -> Frame hooks for Your Suzuki Vitara SUV 2020

OTHER CONTROLS AND EQUIPMENT  
You can use the roof rails or the roof rack  
anchors to attach the optional roof rack  
which is available at your SUZUKI dealer.  
If you use a roof rack, observe the instruc-  
tions and precautions in this section and  
provided with the roof rack.  
Otherwise, these items could block your  
view.  
Frame hooks  
• Secure the front and rear ends of long  
items such as wood panels and surf-  
boards, to both the front and rear of the  
vehicle. You should protect the painted  
surfaces of the vehicle from scuffing  
caused by tie-down ropes.  
• Check periodically that the roof rack is  
securely installed and free from damage.  
• For vehicles with roof rack anchors,  
check that the anchors are covered with  
the caps when not in use.  
Your SUZUKI not recommend you use the  
frame hooks for towing another vehicle.  
SUZUKI was originally designed to tow  
your vehicle on the road emergency tow-  
ing.  
If your vehicle needs to be towed in an  
emergency, refer to “Towing” in “EMER-  
GENCY SERVICE” section.  
• Check that the roof rack is securely  
installed.  
To mount various types of cargo (such  
as skis, bicycles, etc.) properly, use suit-  
able attachments which are available at  
your SUZUKI dealer. Install the attach-  
ments properly and securely according  
to the instructions provided. Do not  
mount cargo directly on the roof panel.  
The cargo can damage the roof panel.  
• The gross weight of the roof rack plus  
cargo must not exceed the loading  
capacity.  
WARNING  
Observe the following instructions  
when using frame hooks. The towing  
hook or vehicle body may break and  
cause serious injury or damage.  
WARNING  
• Abrupt maneuvers or failure to  
properly secure cargo can allow  
the cargo to fly off the vehicle and  
hit others, causing personal injury  
or property damage.  
• Do not use the frame hooks for  
towing another vehicle.  
– Roof rails: 75 kg (165 lbs)  
– Roof rack anchors: 50 kg (110 lbs)  
Also, do not let the gross vehicle weight  
(fully loaded vehicle including driver,  
passengers, cargo, roof load and trailer  
tongue weight) exceed the Gross Vehi-  
cle Weight Rating (GVWR) listed in  
“SPECIFICATIONS” section.  
• Mount and secure the cargo onto the  
roof rack properly according to the  
instructions provided. Stow the heaviest  
items at the bottom and distribute the  
cargo as evenly as possible.  
• Avoid pulling the vehicle to get out  
of severe snowy, muddy or sandy  
conditions, sudden starts or erratic  
driving maneuvers which could  
cause excessive stress on the tow-  
ing hook.  
• Mount cargo securely and avoid  
abrupt maneuvers such as jackrab-  
bit starts, sharp turns, fast corner-  
ing and sudden braking. Check  
periodically that cargo is securely  
fastened.  
• Large, bulky, long or flat items can  
affect vehicle aerodynamics or be  
caught by the wind, and can reduce  
vehicle control resulting in an acci-  
dent and personal injury. Drive cau-  
tiously at a safely reduced speed  
when carrying this type of cargo.  
In such case, we recommend that  
you contact a professional service.  
• Do not carry large items that hang over  
the bumpers or the sides of the vehicle.  
5-20  
54P00-01E  
OTHER CONTROLS AND EQUIPMENT  
To install the hook (1), follow the procedure  
below.  
Front  
EXAMPLE  
(C)  
EXAMPLE  
EXAMPLE  
(1)  
(A)  
(1)  
(A)  
(B)  
54P000528  
2) Remove the cover (C) by using a jack  
handle (A) covered with a soft cloth as  
shown in the illustration.  
61MM0B039  
54P000527  
1) Pick up the towing hook (1), jack handle  
(A) and wheel brace (B) in the luggage  
compartment.  
The towing hook (1) is provided on the  
front of the vehicle for use in emergency  
situations only.  
NOTE:  
Do not use excessive force as it may dam-  
age the cover strap.  
5-21  
54P00-01E  
OTHER CONTROLS AND EQUIPMENT  
Rear  
EXAMPLE  
EXAMPLE  
(B)  
(1)  
EXAMPLE  
(1)  
(2)  
54P000529  
54P000530  
3) Install the towing hook (1) by hand.  
4) To tighten the towing hook (1), turn it  
clockwise by using a wheel brace (B)  
until the hook (1) is securely installed.  
54P000802  
NOTE:  
The frame hook (2) is provided on the rear  
of the vehicle for use in emergency situa-  
tions and sea shipping purposes only.  
We recommend that fasten the cover with  
tape to prevent damage during towing.  
To remove the towing hook (1), reverse the  
installation procedure.  
5-22  
54P00-01E  
OTHER CONTROLS AND EQUIPMENT  
Other hooks  
EXAMPLE  
Heating and air conditioning  
system  
WARNING  
Do not use the hooks (3), (4) and the  
frame holes (5) for towing purpose.  
These hooks and holes may break  
and cause serious injury or damage.  
There are three types of heating and air  
conditioning systems as follows:  
• Heating system  
• Manual heating and air conditioning sys-  
tem  
• Automatic heating and air conditioning  
system (climate control)  
NOTICE  
(3)  
To prevent damage to the vehicle,  
never use the towing hook (1) for  
trailer / train shipping and sea ship-  
ping purposes.  
(4)  
(5)  
54P000531  
The hooks (3) (if equipped) and frame  
holes (5) are provided for trailer/train ship-  
ping purposes only. The hooks (4) are pro-  
vided for sea shipping purpose only.  
5-23  
54P00-01E  
OTHER CONTROLS AND EQUIPMENT  
Air outlet  
1
4
1
4
2
2
3
3
5
5
5*  
5*  
EXAMPLE  
54P000532  
1. Windshield defroster outlet  
2. Side defroster outlet  
3. Side outlet  
76MH0A118  
When each outlet is open, air comes out  
regardless of the air flow selector position.  
4. Center outlet  
5. Floor outlet  
* if equipped  
5-24  
54P00-01E