OTHER CONTROLS AND EQUIPMENT -> Heating system for Your Suzuki Vitara SUV 2020

OTHER CONTROLS AND EQUIPMENT  
Air flow selector (3)  
(c)  
BI-LEVEL (b)  
Heating system  
Description of controls  
(2)  
(b)  
(d)  
54P000536  
Temperature-controlled air comes out of  
the floor outlets and cooler air comes out  
of the center and side outlets. When the  
temperature selector (1) is in the fully cold  
position or fully hot position, however, the  
air from the floor outlets and the air from  
the center and side outlets will be the  
same temperature.  
(a)  
(e)  
54P000534  
This is used to select one of the following  
functions.  
HEAT (c)  
(1)  
(4)  
(3)  
VENTILATION (a)  
54P000533  
Temperature selector (1)  
This is used to select the temperature by  
turning the selector.  
Blower speed selector (2)  
This is used to turn on the blower and to  
select blower speed by turning the selec-  
tor.  
54P000537  
54P000535  
Temperature-controlled air comes out of  
the floor outlets and the side outlets, also  
comes out of the windshield defroster out-  
lets and also comes slightly out of the side  
defroster outlets.  
Temperature-controlled air comes out of  
the center and side air outlets.  
5-25  
54P00-01E  
OTHER CONTROLS AND EQUIPMENT  
System operating instructions  
HEAT & DEFROST (d)  
Air intake selector (4)  
Natural ventilation  
Select VENTILATION and FRESH AIR, the  
temperature selector to the desired tem-  
perature position, and the blower speed  
selector to off. Fresh air will flow through  
the vehicle during driving.  
(f)  
(g)  
54P000538  
61MM0A020  
Temperature-controlled air comes out of  
the floor outlets, the windshield defroster  
outlets, the side defroster outlets and the  
side outlets.  
This selector is used to select the following  
modes.  
Forced ventilation  
The control settings are the same as for  
natural ventilation except you set the  
blower speed selector to a position other  
than off.  
FRESH AIR (f)  
When this mode is selected, the indicator  
light will go off and outside air is used.  
DEFROST (e)  
Normal heating (using outside air)  
Select HEAT and FRESH AIR, the tem-  
perature selector to the desired tempera-  
ture position and the blower speed selector  
to the desired blower speed position. Set-  
ting the blower speed selector to a higher  
blower speed position increases heating  
efficiency.  
RECIRCULATED AIR (g)  
When this mode is selected, the indicator  
light will come on, outside air is shut out  
and inside air is recirculated. This mode is  
suitable when driving through dusty or pol-  
luted air such as in a tunnel, or when  
attempting to quickly cool down the inte-  
rior.  
54P000539  
Temperature-controlled air comes out of  
the windshield defroster outlets, the side  
defroster outlets and the side outlets.  
Quick heating (using recirculated air)  
The control settings are the same as for  
normal heating except you select RECIR-  
CULATED AIR. If you use this heating  
method for an extended period of time, the  
air in the vehicle can become contami-  
nated and the windows can become misty.  
Therefore, use this method only for quick  
heating and change to the normal heating  
method as soon as possible.  
FRESH AIR and RECIRCULATED AIR are  
switched alternately each time the air  
intake selector is pushed.  
NOTE:  
If you select RECIRCULATED AIR for an  
extended period of time, the air in the vehi-  
cle can become contaminated. Therefore,  
you should occasionally select FRESH  
AIR.  
5-26  
54P00-01E  
OTHER CONTROLS AND EQUIPMENT  
Head cooled/Feet warmed heating  
Manual heating and air  
conditioning system  
Select BI-LEVEL and FRESH AIR, the  
temperature selector to the desired tem-  
perature position, and the blower speed  
selector to the desired blower speed posi-  
tion. Unless the temperature selector is in  
the fully cold position or fully hot position,  
the air that comes out of the center and  
side outlets will be cooler than the air that  
comes out of the floor outlets.  
EXAMPLE  
Description of controls  
(2)  
Defrosting/Feet warmed heating  
Select HEAT & DEFROST and FRESH  
AIR, the temperature selector to the  
desired temperature position, and the  
blower speed selector to high. When the  
windshield has become clear, set the  
blower speed selector to the desired  
blower speed position.  
54P000540  
NOTE:  
If you need maximum defrosting, adjust  
the temperature selector to hot end and  
adjust the side outlets so the air blows on  
the side window, in addition to the above  
Defrosting procedure.  
Defrosting  
(1)  
(4) (5)  
(3)  
Select DEFROST and FRESH AIR, the  
temperature selector to the desired tem-  
perature position (higher temperature pro-  
vides more efficient defrosting), and the  
blower speed selector to high. When the  
windshield has become clear, set the  
blower speed selector to the desired  
blower speed position.  
54P000541  
Temperature selector (1)  
This is used to select the temperature by  
turning the selector.  
Blower speed selector (2)  
This is used to turn on the blower and to  
select blower speed by turning the selec-  
tor.  
5-27  
54P00-01E