Get Instrument cluster Guide for Toyota C-Hr SUV 2020

85

Instrument cluster

2

2.

Instrument cluster

Warning lights and

indicators .......................... 86

Gauges and meters ............ 94

Multi-information display ..... 97

Fuel consumption

information...................... 105

C-HR_OM_USA_OM10634U

86

2. Instrument cluster

Warning lights and indicators

The warning lights and indicators on the instrument cluster and

center panel inform the driver of the status of the vehicle’s vari-

ous systems.

For the purpose of explanation, the following illustration dis-

plays all warning lights and indicators illuminated.

The units used on the meters and some indicators may differ depending on

the target region.

C-HR_OM_USA_OM10634U

87

2. Instrument cluster

Warning lights

Warning lights inform the driver of malfunctions in the indicated vehi-

cle’s systems.

Warning lights

Pages

P. 421

1

2

*

Brake system warning light (red) (U.S.A.)

Brake system warning light (red) (Canada)

Malfunction indicator lamp (U.S.A.)

Malfunction indicator lamp (Canada)

SRS warning light

P. 421

P. 422

P. 423

2

ABS warning light (U.S.A.)

ABS warning light (Canada)

Electric power steering system warning light

(red)

Electric power steering system warning light

(yellow)

“RCTA OFF” indicator (if equipped)

Slip indicator light

1, 3

*

1

*

Brake system warning light (yellow)

PCS warning light

1

C-HR_OM_USA_OM10634U

88

2. Instrument cluster

Warning lights

Pages

P. 423

2

*

Parking brake indicator (U.S.A.)

Parking brake indicator (Canada)

Low fuel level warning light

*

P. 423

P. 424

Driver’s and front passenger’s seat belt

reminder light

Rear passengers’ seat belt reminder lights (on

the center panel)

1

*

Tire pressure warning light

*¹: These lights turn on when the engine switch is turned to the “ON” position

(vehicles without a smart key system) or IGNITION ON mode (vehicles

with a smart key system) to indicate that a system check is being per-

formed. They will turn off after the engine is started, or after a few seconds.

There may be a malfunction in a system if a light does not come on, or if

the lights do not turn off. Have the vehicle inspected by your Toyota dealer.

*²: The light flashes to indicate a malfunction.

*³: The light comes on to indicate a malfunction.

C-HR_OM_USA_OM10634U

89

2. Instrument cluster

Indicators

The indicators inform the driver of the operating state of the vehicle’s

various systems.

Indicators

Pages

P. 193

Turn signal indicator

Headlight indicator (U.S.A.)

P. 202

P. 212

P. 203

P. 207

P. 194

P. 269

2

Tail light indicator (Canada)

Front fog light indicator (if equipped)

Headlight high beam indicator

Automatic High Beam indicator

Parking brake indicator (U.S.A.)

Parking brake indicator (Canada)

BSM OFF indicator (if equipped)

1, 2

1

*

BSM outside rear view mirror indicator

(on the outside rear view mirrors) (if equipped)

P. 269,

278

*

2

*

“RCTA OFF” indicator (if equipped)

Security indicator (on the center panel)

Slip indicator light

P. 278

P. 81

1, 3

*

P. 287

C-HR_OM_USA_OM10634U

90

2. Instrument cluster

Indicators

Pages

P. 287

1, 2

*

VSC off indicator

PCS warning light

*

P. 232

P. 46

“AIR BAG ON/OFF” indicator (U.S.A.)

(on the center panel)

1

*

“AIR BAG ON/OFF” indicator (Canada)

(on the center panel)

1

*

P. 46

*¹: These lights turn on when the engine switch is turned to the “ON” position

(vehicles without a smart key system) or IGNITION ON mode (vehicles

with a smart key system) to indicate that a system check is being per-

formed. They will turn off after the engine is started, or after a few seconds.

There may be a malfunction in a system if a light does not come on, or if

the lights do not turn off. Have the vehicle inspected by your Toyota dealer.

*²: The light turns on when the system is off.

*³: The light flashes to indicate that the system is operating.

C-HR_OM_USA_OM10634U

91

2. Instrument cluster

Indicators and symbols displayed on the multi-information dis-

play

Indicators

Pages

P. 199

1, 2, 3

*

Brake hold operated indicator

1

*

Brake hold standby indicator

LDA indicator

P. 199

P. 245

P. 252

P. 267

P. 9 3

2

Cruise control indicator

Cruise control “SET” indicator

Radar cruise control indicator

“SPORT” indicator

“ECO MODE” indicator

Eco Driving Indicator Light

Low outside temperature indicator

P. 9 4

*¹: These lights turn on when the engine switch is turned to the “ON” position

(vehicles without a smart key system) or IGNITION ON mode (vehicles

with a smart key system) to indicate that a system check is being per-

formed. They will turn off after the engine is started, or after a few seconds.

There may be a malfunction in a system if a light does not come on, or if

the lights do not turn off. Have the vehicle inspected by your Toyota dealer.

*²: The light turns on when the system is operating.

*³: The light flashes to indicate a malfunction.

C-HR_OM_USA_OM10634U

92

2. Instrument cluster

Symbols on multi-information display

Pages

P. 421

Charging system warning light

Low engine oil pressure warning light

P. 421

High engine coolant temperature warning light P. 424

Smart key system (if equipped)

P. 181

P. 425

Brake Override System/Drive-Start Control

C-HR_OM_USA_OM10634U

93

2. Instrument cluster

■Eco Driving Indicator Light

During Eco-Friendly acceleration (Eco

driving), Eco Driving Indicator Light will

turn on. When the acceleration exceeds

Zone of Eco driving, and when the vehicle

is stopped, the light turns off.

Eco Driving Indicator Light availability can

be customized. The default setting is on.

(P. 490)

Eco Driving Indicator Light will not operate in the following conditions:

●The shift lever is in anything other than D.

2

●The vehicle is being driven in “SPORT” mode (P. 267)

●The vehicle speed is approximately 80 mph (130 km/h) or higher.

WARNING

■If a safety system warning light does not come on

Should a safety system light such as ABS and SRS airbag warning light not

come on when you start the engine, this could mean that these systems are

not available to help protect you in an accident, which could result in death

or serious injury. Have the vehicle inspected by your Toyota dealer.

C-HR_OM_USA_OM10634U

94

2. Instrument cluster

Gauges and meters

The units used on the speedometer may differ depending on the tar-

get region.

Tachometer

Displays the engine speed in revolutions per minute.

Multi-information display

Presents the driver with a variety of driving-related data. (P . 9 7)

Displays warning messages in case of a malfunction. (P. 431)

Speedometer

Displays the vehicle speed.

Fuel gauge

Displays the quantity of fuel remaining in the tank.

Outside temperature display

Displays the outside temperature within the range of -40°F (-40°C) to

122°F (50°C). Low outside temperature indicator comes on when the

ambient temperature is 37°F (3°C) or lower.

C-HR_OM_USA_OM10634U

95

2. Instrument cluster

Odometer and trip meter display

Displays the following items.

Odometer:

Displays the total distance the vehicle has been driven.

Trip meter:

Displays the distance the vehicle has been driven since the meter was last

reset. Trip meters A and B can be used to record and display different dis-

tances independently.

Maintenance required information:

Displays the remaining distance until the engine oil should be changed. If

“-” is displayed before distance, it means oil maintenance is overdue. Have

the engine oil changed by your Toyota dealer.

2

• Displays the maintenance required information when the engine switch

is turned to the “ON” position (vehicles without smart key system) or in

IGNITION ON mode (vehicles with smart key system).

• Maintenance required information reset method (P. 334)

Shift position and shift range display

Displays the selected shift position or selected shift range. (P. 188)

Engine coolant temperature gauge

Displays the engine coolant temperature.

Changing the display

Switches the items of the odome-

ter and trip meter display by

pressing the “TRIP” switch.

When the trip meter is displayed,

pressing and holding the “TRIP”

switch will reset the trip meter.

C-HR_OM_USA_OM10634U

96

2. Instrument cluster

Instrument panel light control

The brightness of the instrument panel lights can be adjusted.

Brighter

Darker

■The meters and display illuminate when

Vehicles without a smart key system:

The engine switch is in the “ON” position.

Vehicles with a smart key system:

The engine switch is in IGNITION ON mode.

■Outside temperature display

●In the following situations, the correct outside temperature may not be dis-

played, or the display may take longer than normal to change.

• When stopped, or driving at low speeds (less than 16 mph [25 km/h])

• When the outside temperature has changed suddenly (at the entrance/

exit of a garage, tunnel, etc.)

●If “” is displayed continuously, the system may be malfunctioning. Take

your vehicle to your Toyota dealer.

■Adjusting the clock

The clocks can be adjusted on the audio system screen.

Refer to “MULTIMEDIA OWNER’S MANUAL”.

NOTICE

■To prevent damage to the engine and its components

●Do not let the indicator needle of the tachometer enter the red zone, which

indicates the maximum engine speed.

●The engine may be overheating if the engine coolant temperature gauge

enters the red zone (“H”). In this case, immediately stop the vehicle in a

safe place, and check the engine after it has cooled completely. (P. 457)

C-HR_OM_USA_OM10634U

97

2. Instrument cluster

Multi-information display

Display contents

The multi-information display presents the driver with a variety of vehi-

cle data.

● Menu icons

Displays the following informa-

tion when an icon is selected.

(P . 9 8)

2

Some of the information may be

displayed

automatically

depending on the situation.

Drive information

Select to display various drive data. (P . 9 8)

Audio system-linked display

Select to enable selection of an audio source or track on the meter

using the meter control switches.

Driving assist system information

Select to display the operational status of the following systems:

• LDA (Lane Departure Alert with steering control) (P. 242)

• Dynamic radar cruise control with full-speed range (P. 252)

Warning message display

Select to display warning messages and measures to be taken if a

malfunction is detected. (P. 431)

Settings display

Select to change the meter display settings and the operation set-

tings of some vehicle functions. (P . 1 00)

C-HR_OM_USA_OM10634U

98

2. Instrument cluster

Operating the meter control switches

The multi-information display is

operated using the meter control

switches.

Return to the previous screen

Enter/set

Select an item/change pages

Drive information

● Current fuel consumption (bar type/numerical value)*¹

Displays the current rate of fuel consumption.

● Average fuel consumption (after reset*²/after start/after refuel)*¹

Displays the average fuel consumption since the function was reset, the

engine was started, and the vehicle was refueled, respectively

Use the displayed average fuel consumption as a reference.

● Average vehicle speed (after reset*²/after start)*¹

Displays the average vehicle speed since the function was reset and the

engine was started, respectively

● Elapsed time (after reset*²/after start)*¹

Displays the elapsed time since the function was reset and the engine was

started, respectively

● Distance (range/after start)*¹

Displays the estimated maximum distance that can be driven with the

quantity of fuel remaining and the distance driven after the engine was

started, respectively

• This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

• When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the engine switch off. If the vehicle is refueled with-

out turning the engine switch off, the display may not be updated.

C-HR_OM_USA_OM10634U

99

2. Instrument cluster

● Eco Driving Indicator Zone Display

P . 1 02

● Speedometer

Displays the vehicle speed.

● G Monitor

P . 1 03

● Display off

A blank screen is displayed.

*¹: Can be registered to Drive information 1 and 2. (P . 1 00)

*²: Resetting procedures:

2

• Select a function to be reset using the meter control switches and then

press and hold to reset.

• If there is more than one function that can be reset, check boxes will be

displayed next to those functions.

C-HR_OM_USA_OM10634U

100

Settings display

2. Instrument cluster

The settings of the following items can be changed, refer to P. 488.

For functions that can be enabled or disabled, the function switches

between on and off each time

is pressed.

●

LDA (Lane Departure Alert with steering control) (P. 242)

Select to set up the following items.

• Steering Assist on/off

• Alert sensitivity

• Sway Alert on/off

• Sway sensitivity

●

PCS (Pre-Collision System) (P. 228)

Select to set up the following items.

• PCS on/off

• PCS sensitivity

BSM (Blind Spot Monitor) (if equipped) (P. 269)

Select to set up the following items.

• BSM function on/off

• BSM Sensitivity

• BSM Brightness

• RCTA function on/off

● Driving mode select (P. 267)

C-HR_OM_USA_OM10634U

101

2. Instrument cluster

● Vehicle Settings

•

RCTA setup (P. 282)*

Select to change the RCTA buzzer volume.

•

(Tire pressure warning system) setup (P. 364)

Select to initialize the tire pressure warning system.

● Meter settings

Select the menu to set up the following items.

• Language

2

Select to change the language on the display.

• Units

Select to change the unit of measure for fuel consumption.

•

(Eco Driving Indicator Light) setup

Select to activate/deactivate the Eco Driving Indicator Light

• Drive information 1 and 2

Select to select up to 2 items that will be displayed on a Drive informa-

tion screen, up to 2 Drive information screens can be set.

• Pop-up display

Select to enable/disable pop-up displays for incoming call display of the

hands-free phone system.

• Initialisation

Registered or changed meter settings will be deleted or returned to their

default setting.

*: if equipped

C-HR_OM_USA_OM10634U

102

2. Instrument cluster

■Setting items

●“Meter Settings” and “Vehicle Settings” setting items are not selectable

during driving and cannot be operated.

Also, the settings screen is temporarily canceled in the following situations.

• A warning message is displayed.

• The vehicle starts off.

●Settings for functions not equipped to the vehicle are not displayed.

●When a function is turned off, the related settings for that function are not

selectable.

■Pop-up display

In some situations, such as when a switch operation is performed, a pop-up

display will be temporarily displayed on the multi-information display.

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

■When disconnecting and reconnecting battery terminals

The drive information will be reset.

■Eco Driving Indicator Zone Display

Suggests Zone of Eco driving and Eco

driving ratio based on acceleration.

Zone of Eco driving

Eco driving ratio based on accelera-

tion

If the vehicle exceeds Zone of Eco

driving, the green area disappears

and Eco Driving Indicator Light will

turn off. (P . 9 3)

C-HR_OM_USA_OM10634U

103

2. Instrument cluster

■G Monitor

The following item is displayed.

G-force display

Displays the current G-force state.

2

■Ending display

When the engine switch is turned off, each of the following will be displayed

on the multi-information display, and will extinguish after approximately

30 seconds.

●Elapsed time

●Distance

●Average fuel consumption

C-HR_OM_USA_OM10634U

104

2. Instrument cluster

WARNING

■Caution for use while driving

●When operating the multi-information display while driving, pay extra

attention to the safety of the area around the vehicle.

●Do not look continuously at the multi-information display while driving as

you may fail to see pedestrians, objects on the road, etc. ahead of the

vehicle.

■The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal

information display. At extremely low temperatures, the information display

monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that

the vehicle is parked in a place with adequate ventilation. In a closed area

such as a garage, exhaust gases including harmful carbon monoxide (CO)

may collect and enter the vehicle. This may lead to death or a serious

health hazard.

NOTICE

■While setting up the display

To prevent battery discharge, ensure that the engine is running while setting

up the display features.

C-HR_OM_USA_OM10634U

105

2. Instrument cluster

Fuel consumption information

Fuel consumption information can be displayed on the audio

system screen.

2

C-HR_OM_USA_OM10634U

106

2. Instrument cluster

Trip information

Press the “MENU” button.

1

2

Select “Info” on the “Menu”

screen.

If the “History” screen is displayed,

select “Trip Information”.

Resetting the consumption data

Average vehicle speed since

the engine was started

Elapsed time since the engine

was started

Fuel consumption in the past 15

minutes

Cruising range (P . 1 07)

Current fuel consumption

Average fuel consumption for the past 15 minutes is divided by color

into past averages and averages attained since the engine switch was

last turned to the “ON” position (vehicles without a smart key system)

or IGNITION ON mode (vehicles with a smart key system). Use the

displayed average fuel consumption as a reference.

The image is an example only, and may vary slightly from actual condi-

tions.

C-HR_OM_USA_OM10634U

107

2. Instrument cluster

History

Press the “MENU” button.

1

2

Select “Info” on the “Menu” screen.

If the “Trip Information” screen is displayed, select “History”.

Resetting the history data

Best recorded fuel consumption

Latest fuel consumption

Previous fuel consumption

record

2

Displays the daily average fuel

consumption. (Instead of the date,

“Trip 1” through “Trip 5” will be dis-

played.)

Updating the latest fuel consumption data

The average fuel consumption history is divided by color into past

averages and the average fuel consumption since the last time

updated. Use the displayed average fuel consumption as a reference.

The image is an example only, and may vary slightly from actual condi-

tions.

■Updating the history data

Update the average fuel consumption by selecting “Clip” to measure the cur-

rent fuel consumption again.

■Resetting the data

The fuel consumption data can be deleted by selecting “Clear”.

■Cruising range

Displays the estimated maximum distance that can be driven with the quan-

tity of fuel remaining.

This distance is computed based on your average fuel consumption.

As a result, the actual distance that can be driven may differ from that dis-

played.

C-HR_OM_USA_OM10634U

108

2. Instrument cluster

C-HR_OM_USA_OM10634U

Instrument cluster for Your Toyota C-Hr SUV 2020

Popular Manuals