Before driving -> Opening and closing the windows-Power windows for Your Toyota Corolla 4 Door 2023

134  
3-5. Opening and closing the windows  
3-5.Opening and closing the windows  
dow frame while the window is clos-  
ing, window movement is stopped  
and the window is opened slightly.  
Power windows  
Catch protection function  
Opening and closing the  
power windows  
If an object becomes caught  
between the door and window while  
the window is opening, window  
movement is stopped.  
The power windows can be  
opened and closed using the  
switches.  
Operating the switch moves the  
windows as follows:  
When the window cannot be  
opened or closed  
When the jam protection function or  
catch protection function operates  
unusually and the door window can-  
not be opened or closed, perform  
the following operations with the  
power window switch of that door.  
Stop the vehicle. With the engine  
switch in ON, within 4 seconds of  
the jam protection function or  
catch protection function activat-  
ing, continuously operate the  
power window switch in the  
one-touch closing direction or  
one-touch opening direction so  
that the door window can be  
opened and closed.  
1 Closing  
2 One-touch closing*  
3 Opening  
If the door window cannot be  
opened and closed even when  
performing the above operations,  
perform the following procedure  
for function initialization.  
4 One-touch opening*  
*
: To stop the window partway,  
1 Turn the engine switch to ON.  
operate the switch in the opposite  
direction.  
2 Pull and hold the power window  
switch in the one-touch closing  
direction and completely close  
the door window.  
The power windows can be  
operated when  
3 Release the power window  
switch for a moment, resume  
pulling the switch in the  
The engine switch is in ON.  
Operating the power windows  
after turning the engine off  
one-touch closing direction, and  
hold it there for approximately 6  
seconds or more.  
The power windows can be oper-  
ated for approximately 45 seconds  
after the engine switch is turned to  
ACC or OFF. They cannot, however,  
be operated once either front door is  
opened.  
4 Press and hold the power win-  
dow switch in the one-touch  
opening direction. After the door  
window is completely opened,  
continue holding the switch for  
an additional 1 second or more.  
Jam protection function  
5 Release the power window  
If an object becomes jammed  
between the window and the win-  
switch for a moment, resume  
135  
3-5. Opening and closing the windows  
pushing the switch in the  
one-touch opening direction, and  
hold it there for approximately 4  
seconds or more.  
Closing the windows  
The driver is responsible for all  
the power window operations,  
including the operation for the  
passengers. In order to prevent  
accidental operation, especially  
by a child, do not let a child  
operate the power windows. It is  
possible for children and other  
passengers to have body parts  
caught in the power window.  
Also, when riding with a child, it  
is recommended to use the win-  
dow lock switch. (P.136)  
6 Pull and hold the power window  
switch in the one-touch closing  
direction again. After the door  
window is completely closed,  
continue holding the switch for a  
further 1 second or more.  
If you release the switch while the  
window is moving, start again from  
the beginning.  
If the window reverses and cannot  
be fully closed or opened, have the  
vehicle inspected by your Toyota  
dealer.  
Check to make sure that all pas-  
sengers do not have any part of  
their body in a position where it  
could be caught when a window  
is being operated.  
3
Door lock linked window opera-  
tion  
Vehicles without a smart key sys-  
tem: The power windows can be  
opened and closed using the key.  
(P.112)  
*
Vehicles with a smart key system:  
The power windows can be  
opened and closed using the  
*
mechanical key. (P.382)  
The power windows can be  
opened using the wireless remote  
When using the wireless remote  
control (if equipped), key or  
mechanical key and operating  
the power windows, operate the  
power window after checking to  
make sure that there is no pos-  
sibility of any passenger having  
any of their body parts caught in  
the window. Also do not let a  
child operate window by the  
wireless remote control (if  
*
control. (with a wireless remote  
control function) (P.111)  
*
: These settings must be custom-  
ized at your Toyota dealer.  
Customization  
Some functions can be customized.  
(P.412)  
equipped), key or mechanical  
key. It is possible for children  
and other passengers to get  
caught in the power window.  
WARNING  
Observe the following precau-  
tions. Failure to do so may result  
in death or serious injury.  
When exiting the vehicle, turn  
the engine switch off, carry the  
key and exit the vehicle along  
with the child. There may be  
accidental operation, due to  
mischief, etc., that may possibly  
lead to an accident.  
136  
3-5. Opening and closing the windows  
WARNING  
Jam protection function  
Never use any part of your body  
to intentionally activate the jam  
protection function.  
The jam protection function may  
not work if something gets  
jammed just before the window  
is fully closed. Be careful not to  
get any part of your body  
The power windows can be  
jammed in the window.  
operated when  
Catch protection function  
The engine switch is in ON.  
Never use any part of your body  
or clothing to intentionally acti-  
vate the catch protection func-  
tion.  
When the battery is discon-  
nected  
The window lock switch is disabled.  
If necessary, press the window lock  
switch after reconnecting the bat-  
tery.  
The catch protection function  
may not work if something gets  
caught just before the window is  
fully opened. Be careful not to  
get any part of your body or  
clothing caught in the window.  
Preventing accidental  
operation (window lock  
switch)  
This function can be used to  
prevent children from acciden-  
tally opening or closing a pas-  
senger window.  
Press the switch.  
The indicator  
will come on and  
the passenger windows will be  
locked.  
The passenger windows can still be  
opened and closed using the  
driver’s switch even if the lock  
switch is on.