Driving -> Driving procedures-Continuously variable transmission vehicles without paddle shift switches for Your Toyota Corolla 4 Door 2023

160  
4-2. Driving procedures  
dealer.  
Continuously variable  
transmission (vehi-  
cles without paddle  
shift switches)  
When driving with the dynamic  
radar cruise control activated  
Even when switching the driving  
mode to sport mode with the intent  
of enabling engine braking, engine  
braking will not occur because  
dynamic radar cruise control will not  
be canceled. (P.247)  
Select the shift position  
depending on your purpose  
and situation.  
Restraining sudden start  
(Drive-Start Control)  
P.149  
Shift position purpose  
and functions  
G AI-SHIFT  
G AI-SHIFT automatically selects a  
suitable gear for sporty driving  
Shift posi-  
according to driver’s input and driv-  
ing conditions. G AI-SHIFT operates  
automatically when the shift lever is  
in D and sport mode is selected for  
the driving mode. (Selecting normal  
mode or shifting the shift lever to the  
B position cancels this function.)  
Objective or function  
tion  
Parking the vehi-  
cle/starting the engine  
P
R
N
Reversing  
After recharging/reconnecting  
the battery  
Neutral  
(Condition in which the  
power is not transmit-  
ted)  
P.385  
Continuously variable transmis-  
sion fail-safe control  
*
D
B
Normal driving  
The system detects malfunctioning  
parts targeted (all of the solenoids  
that perform the shifting function) by  
the On-Board Diagnostics, and per-  
forms fail-safe mechanisms, such  
as restricting the shifting function or  
transmission ratio control.  
Applying moderate  
engine braking driving  
down hills  
*
: To improve fuel efficiency and  
reduce noise, shift the shift lever  
to D for normal driving.  
In this event, the malfunction indica-  
tor lamp turns on.  
WARNING  
To protect the continuously  
variable transmission  
When driving on slippery  
road surfaces  
If the continuously variable trans-  
mission fluid temperature is high,  
“Transmission Oil Temp High Stop in  
a Safe Place and See Owner’s  
Manual” will be displayed on the  
multi-information display and the  
vehicle will go into transmission pro-  
tection mode automatically. Have  
the vehicle inspected by your Toyota  
Do not accelerate or shift the shift  
gears suddenly.  
Sudden changes in engine brak-  
ing may cause the vehicle to spin  
or skid, resulting in an accident.  
161  
4-2. Driving procedures  
Shifting the shift lever  
Shift lock system  
The shift lock system is a system to  
prevent accidental operation of the  
shift lever in starting.  
The shift lever can be shifted from P  
only when the engine switch is in  
ON and the brake pedal is being  
depressed.  
If the shift lever cannot be  
shifted from P  
First, check whether the brake pedal  
is being depressed.  
If the shift lever cannot be shifted  
with your foot on the brake pedal,  
there may be a problem with the  
shift lock system. Have the vehicle  
inspected by your Toyota dealer  
immediately.  
The following steps may be used as  
an emergency measure to ensure  
that the shift lever can be shifted.  
Releasing the shift lock:  
4
1 Set the parking brake.  
2 Turn the engine switch off.  
3 Depress the brake pedal.  
4 Ply the cover up with a flathead  
screwdriver or equivalent tool.  
To prevent damaging the cover,  
wrap the tip of the flathead  
screwdriver with a tape.  
:While the engine switch is in  
ON and the brake pedal  
depressed*, shift the shift lever  
while pushing the shift release  
button on the shift knob.  
:Shift the shift lever while  
pushing the shift release button  
on the shift knob.  
:Shift the shift lever normally.  
When shifting the shift lever  
between P and D, make sure that  
the vehicle is completely stopped  
and the brake pedal is depressed.  
5 Press and hold the shift lock  
override button and then push  
the shift release button on the  
shift knob.  
*
: For the vehicle be able to be  
shifted from P, the brake pedal  
must be depressed before the  
shift release button is pushed. If  
the shift release button is pushed  
first, the shift lock will not be  
released.  
The shift lever can be shifted while