Driving -> Driving procedures-Engine ignition switch vehicles without a smart key system for Your Toyota Corolla 4 Door 2023

154  
4-2. Driving procedures  
4-2.Driving procedures  
Engine (ignition)  
WARNING  
switch (vehicles with-  
out a smart key sys-  
tem)  
When starting the engine  
Always start the engine while sit-  
ting in the driver’s seat. Do not  
depress the accelerator pedal  
while starting the engine under  
any circumstances. Doing so may  
cause an accident resulting in  
death or serious injury.  
Starting the engine  
1 Check that the parking brake  
is set. (168)  
NOTICE  
2 Check that the shift lever is in  
When starting the engine  
P.  
Do not crank the engine for  
more than 30 seconds at a time.  
This may overheat the starter  
and wiring system.  
3 Firmly depress the brake  
pedal.  
4 Turn the engine switch to  
Do not race a cold engine.  
START to start the engine.  
If the engine becomes difficult to  
start or stalls frequently, have  
your vehicle checked by your  
Toyota dealer immediately.  
If the engine does not start  
The engine immobilizer system may  
not have been deactivated. (P.77)  
Contact your Toyota dealer.  
When the steering lock cannot  
Changing the engine  
switch positions  
be released  
When starting the engine, the  
engine switch may seem stuck in  
OFF. To free it, turn the key while  
turning the steering wheel slightly  
left and right.  
1 OFF (“LOCK” position)  
The steering wheel is locked and  
the key can be removed. (The key  
can be removed only when the shift  
lever is in P.)  
2 ACC (“ACC” position)  
Some electrical components such  
as the audio system can be used.