When trouble arises -> Steps to take in an emergency-If your vehicle needs to be towed for Your Toyota Corolla 4 Door 2023

351  
7-2. Steps to take in an emergency  
7-2.Steps to take in an emergency  
While towing  
If your vehicle needs  
to be towed  
When towing using cables or  
chains, avoid sudden starts, etc.  
which place excessive stress on  
the towing eyelets, cables or  
chains. The towing eyelets,  
cables or chains may become  
damaged, broken debris may hit  
people, and cause serious dam-  
age.  
If towing is necessary, we  
recommend having your  
vehicle towed by your Toy-  
ota dealer or commercial  
towing service, using a  
wheel-lift type truck or flat-  
bed truck.  
Do not turn the engine switch  
off.  
There is a possibility that the  
steering wheel is locked and  
cannot be operated.  
Use a safety chain system  
for all towing, and abide by  
all state/provincial and local  
laws.  
Installing towing eyelets to  
the vehicle  
Make sure that towing eyelets are  
installed securely.  
If not securely installed, towing  
eyelets may come loose during  
towing.  
WARNING  
Observe the following precau-  
tions.  
Failure to do so may result in  
death or serious injury.  
NOTICE  
When towing the vehicle  
To prevent damage to the  
vehicle when towing using a  
wheel-lift type truck  
Be sure to transport the vehicle  
with the front wheels raised or  
with all four wheels raised off the  
ground. If the vehicle is towed  
with the front wheels contacting  
the ground, the drivetrain and  
related parts may be damaged.  
7
Vehicles without a smart key  
system: Do not tow the vehicle  
from the rear when the engine  
switch is off or the key is  
removed. The steering lock  
mechanism is not strong  
enough to hold the front wheels  
straight.  
Vehicles with a smart key sys-  
tem: Do not tow the vehicle from  
the rear when the engine switch  
is off.  
When raising the vehicle,  
ensure adequate ground clear-  
ance for towing at the opposite  
end of the raised vehicle. With-  
out adequate clearance, the  
vehicle could be damaged while  
being towed.  
352  
7-2. Steps to take in an emergency  
Turn automatic mode off.  
(P.169)  
NOTICE  
To prevent damage to the  
vehicle when towing with a  
sling-type truck  
From the rear  
Do not tow with a sling-type truck,  
either from the front or rear.  
To prevent damage to the  
vehicle during emergency  
towing  
Do not secure cables or chains to  
the suspension components.  
Situations when it is nec-  
essary to contact dealers  
before towing  
Use a towing dolly under the  
front wheels.  
NOTICE  
The following may indicate a  
problem with your transmission.  
Contact your Toyota dealer or  
commercial towing service  
before towing.  
Towing with a sling-type truck  
Do not tow with a sling-type truck  
to prevent body damage.  
The engine is running but the  
vehicle does not move.  
The vehicle makes an abnor-  
mal sound.  
Towing with a wheel-lift  
type truck  
Using a flatbed truck  
When using a flat-bed truck to  
transport the vehicle, use tire  
strapping belts. Refer to the  
owner's manual of the flat-bed  
truck for the tire strapping  
method.  
From the front  
In order to suppress vehicle  
movement during transporta-  
tion, set the parking brake and  
turn the engine switch off.  
Release the parking brake.  
353  
7-2. Steps to take in an emergency  
Type A  
Emergency towing (vehi-  
cles with a towing eyelet)  
If a tow truck is not available in  
an emergency, your vehicle may  
be temporarily towed using  
cables or chains secured to the  
emergency towing eyelets. This  
should only be attempted on  
hard surfaced roads for at most  
50 miles (80 km) at under 18  
mph (30 km/h).  
A driver must be in the vehicle to  
steer and operate the brakes.  
The vehicle’s wheels, drive train,  
axles, steering and brakes must  
be in good condition.  
Type B  
For vehicles with a continuously  
variable transmission, only the  
front towing eyelets may be  
used.  
Emergency towing proce-  
dure (vehicles with a tow-  
ing eyelet)  
7
To have your vehicle towed by  
another vehicle, the towing eye-  
let must be installed to your  
vehicle. Install the towing eyelet  
using the following procedure.  
3 Insert the towing eyelet into  
the hole and tighten partially  
by hand.  
1 Take out the wheel nut  
wrench and towing eyelet.  
(371)  
2 Remove the eyelet cover  
using a flathead screwdriver.  
To protect the bodywork, place a  
rag between the screwdriver and  
the vehicle body as shown in the  
illustration.