Audio -> Tips for operating the audio/visual system for Your Toyota Rav4 SUV 2020

446  
5-11. Tips for operating the audio/visual system  
5-11.Tips for operating the audio/visual system  
FM is about 25 miles (40 km).  
Once outside this range, you  
may notice fading and drifting,  
which increase with the distance  
from the radio transmitter. They  
are often accompanied by dis-  
tortion.  
Operating information  
The use of a cellular phone inside  
or near the vehicle may cause a  
noise from the speakers of the  
audio/visual system which you are  
listening to. However, this does  
not indicate a malfunction.  
Multi-path: FM signals are  
reflective, making it possible for  
2 signals to reach the vehicle’s  
antenna at the same time. If this  
happens, the signals will cancel  
each other out, causing a  
momentary flutter or loss of  
reception.  
NOTICE  
To avoid damage to the  
audio/visual system:  
• Be careful not to spill beverages  
over the audio/visual system.  
Radio  
Static and fluttering: These  
occur when signals are blocked  
by buildings, trees or other large  
objects. Increasing the bass  
level may reduce static and flut-  
tering.  
Usually, a problem with radio  
reception does not mean there  
is a problem with the radio it  
is just the normal result of condi-  
tions outside the vehicle.  
For example, nearby buildings  
and terrain can interfere with FM  
reception. Power lines or phone  
wires can interfere with AM sig-  
nals. And of course, radio sig-  
nals have a limited range. The  
farther the vehicle is from a sta-  
tion, the weaker its signal will  
be. In addition, reception condi-  
tions change constantly as the  
vehicle moves.  
Station swapping: If the FM sig-  
nal being listened to is inter-  
rupted or weakened, and there  
is another strong station nearby  
on the FM band, the radio may  
tune in the second station until  
the original signal can be picked  
up again.  
AM  
Fading: AM broadcasts are  
reflected by the upper atmo-  
sphere especially at night.  
These reflected signals can  
interfere with those received  
directly from the radio station,  
causing the radio station to  
sound alternately strong and  
weak.  
Here are some common recep-  
tion problems that may not indi-  
cate a problem with the radio as  
described.  
FM  
Fading and drifting stations:  
Generally, the effective range of  
447  
5-11. Tips for operating the audio/visual system  
Station interference: When a  
reflected signal and a signal  
received directly from a radio  
station are very nearly the same  
frequency, they can interfere  
with each other, making it diffi-  
cult to hear the broadcast.  
Use of the Made for Apple  
Static: AM is easily affected by  
external sources of electrical  
noise, such as high tension  
power lines, lightening or electri-  
cal motors. This results in static.  
badge means that an acces-  
sory has been designed to  
connect specifically to the  
Apple product(s) identified in  
the badge, and has been cer-  
tified by the developer to meet  
Apple performance stan-  
dards. Apple is not responsi-  
ble for the operation of this  
device or its compliance with  
safety and regulatory stan-  
dards. Please note that the  
use of this accessory with an  
Apple product may affect  
wireless performance.  
SiriusXM*  
Cargo loaded on the roof lug-  
gage carrier, especially metal  
objects, may adversely affect  
the reception of SiriusXM Sat-  
ellite Radio.  
5
Alternation or modifications  
carried out without appropri-  
ate authorization may invali-  
date the user’s right to  
iPhone, iPod, iPod classic,  
iPod nano, iPod touch, and  
Lightning are trademarks of  
Apple Inc., registered in the  
U.S. and other countries.  
operate the equipment.  
*
: This function is not made avail-  
able in some countries or areas.  
iPod/iPhone  
Compatible models  
Certification  
The following iPod touch® and  
iPhone® devices can be used  
with this system.  
Made for  
• iPhone X  
• iPhone 8  
• iPhone 8 Plus  
• iPhone 7  
• iPhone 7 Plus  
• iPhone SE  
448  
5-11. Tips for operating the audio/visual system  
• iPhone 6s  
• iPhone 6s Plus  
• iPhone 6  
• iPhone 6 Plus  
• iPhone 5s  
• iPhone 5c  
• iPhone 5  
• iPod touch (6th generation)  
• iPod touch (5th generation)  
File information  
Compatible USB devices  
USB communi- USB 2.0 HS (480  
cation formats  
Mbps)  
File formats  
FAT 16/32  
Correspon-  
dence class  
Mass storage  
class  
This system only supports audio  
playback.  
Compatible audio format  
Depending on difference between  
models or software versions etc.,  
some models might be incompati-  
ble with this system.  
Compatible compressed files  
Item  
USB  
High-resolution sound  
source  
MP3/WMA/AAC  
WAV(LPCM)/FL  
AC/ALAC/OGG  
Vorbis  
This device supports high-reso-  
lution sound sources.  
Compatible file  
format  
The definition of high-resolution  
is based on the standards of  
groups such as the CTA (Con-  
sumer Technology Association).  
MP4/AVI/WMV  
Compatible file  
MP4/AVI/WMV  
*
format (video)  
Folders in the  
device  
Maximum  
3000  
Supported formats and play-  
able media are as follows.  
Files in the  
device  
Maximum  
9999  
Supported formats  
WAV, FLAC, ALAC, OGG Vorbis  
Playable media  
USB  
Maximum  
255  
Files per folder  
*
: USB video only  
449  
5-11. Tips for operating the audio/visual system  
Corresponding bit rates*1  
Corresponding sampling fre-  
quency  
File type  
MP3 files:  
MPEG 1 LAYER  
3
Bit rate (kbps)  
File type  
Frequency (kHz)  
32/44.1/48  
MP3 files:  
MPEG 1 LAYER  
3
32 - 320  
8 - 160  
MP3 files:  
MPEG 2 LSF  
LAYER 3  
MP3 files:  
MPEG 2 LSF  
LAYER 3  
16/22.05/24  
32/44.1/48  
WMA files: Ver.  
7, 8  
CBR 48 - 192  
CBR 48 - 320  
WMA files:  
*1  
Ver. 7, 8, 9  
WMA files:  
(9.1/9.2)  
*2  
Ver. 9 (9.1/9.2)  
11.025/12/16/  
22.05/24/32/  
44.1/48  
AAC files:  
MPEG4/AAC-LC  
AAC files:  
MPEG4/AAC-LC  
8 - 320  
32-500  
OGG Vorbis  
8/11.025/12/16/  
22.05/24/32/  
44.1/48/88.2/  
96/176.4/192  
WAV (LPCM)  
5
*1  
:Variable Bit Rate (VBR) compati-  
ble  
*2  
files  
*2  
:Only compatible with Windows  
Media Audio Standard  
8/11.025/12/16/  
22.05/24/32/  
44.1/48/88.2/  
96/176.4/192  
*2  
FLAC  
Quantization bit  
File type  
rate (bit)  
WAV (LPCM)  
files  
8/11.025/12/16/  
22.05/24/32/  
44.1/48/64/  
88.2/96  
*2  
ALAC  
16/24  
FLAC  
ALAC  
8/11.025/16/  
22.05/32/44.1/  
48  
*2  
OGG Vorbis  
Compatible channel modes  
*1  
*2  
:Only compatible with Windows  
Media Audio Standard  
File type  
MP3 files  
WMA files  
Channel mode  
Stereo, joint ste-  
reo, dual chan-  
nel and  
:Sound source of 48kHz or more  
is down-converted to  
48kHz/24bit.  
monaural  
2ch  
450  
5-11. Tips for operating the audio/visual system  
disc title, track title and artist  
name in other formats.  
File type  
AAC files  
Channel mode  
1ch, 2ch (Dual  
channel is not  
supported)  
WMA/AAC files can contain a  
WMA/AAC tag that is used in  
the same way as an ID3 tag.  
WMA/AAC tags carry infor-  
mation such as track title and  
artist name.  
WAV (LPCM)/  
FLAC/ALAC/ 2ch  
OGG Vorbis  
MP3 (MPEG Audio Layer 3),  
WMA (Windows Media Audio)  
and AAC (Advanced Audio  
Coding) are audio compres-  
sion standards.  
The emphasis function is  
available only when playing  
MP3 files.  
This system can play back  
AAC files encoded by iTunes.  
This system can play  
MP3/WMA/AAC files on USB  
memory.  
The sound quality of  
MP3/WMA files generally  
improves with higher bit rates.  
MP4, WMV and AVI files can  
use the following resolutions:  
128x96, 160x120, 176x144  
(QCIF), 320x240 (QVGA),  
352x240 (SIF), 352x288  
(CIF), 640x480 (VGA),  
720x480 (NTSC), 720x576  
(PAL)  
m3u playlists are not compati-  
ble with the audio player.  
MP3i (MP3 interactive) and  
MP3PRO formats are not  
compatible with the audio  
player.  
The player is compatible with  
When naming an  
VBR (Variable Bit Rate).  
MP3/WMA/AAC file, add an  
appropriate file extension  
(.mp3/.wma/.m4a).  
When playing back files  
recorded as VBR (Variable Bit  
Rate) files, the play time will  
not be correctly displayed if  
the fast forward or reverse  
operations are used.  
This system plays back files  
with .mp3/.wma/.m4a file  
extensions as  
MP3/WMA/AAC files respec-  
tively. To prevent noise and  
playback errors, use the  
appropriate file extension.  
It is not possible to check fold-  
ers that do not include  
MP3/WMA/AAC files.  
MP3/WMA/AAC files in fold-  
ers up to 8 levels deep can be  
played. However, the start of  
playback may be delayed  
MP3 files are compatible with  
the ID3 Tag Ver. 1.0, Ver. 1.1,  
Ver. 2.2 and Ver. 2.3 formats.  
This system cannot display  
451  
5-11. Tips for operating the audio/visual system  
when using USB memory  
Compatible video format  
containing numerous levels of  
folders. For this reason, we  
recommend creating USB  
memory with no more than 2  
levels of folders.  
Format  
Codec  
Video codec:  
H.264/MPEG-  
4 AVC  
MPEG4  
Audio codec:  
AAC  
MP3  
MPEG-4  
Corresponding  
screen size:  
MAX 1920   
1080  
Corresponding  
frame rate:  
MAX 60i/30p  
The play order of the USB  
memory with the structure  
shown above is as follows:  
5
The order changes depending  
on the personal computer and  
MP3/WMA/AAC encoding  
software you use.  
452  
5-11. Tips for operating the audio/visual system  
ding track-related information  
Format  
Codec  
in an MP3 file. This embed-  
ded information can include  
the track number, track title,  
the artist’s name, the album  
title, the music genre, the year  
of production, comments,  
cover art and other data. The  
contents can be freely edited  
using software with ID3 tag  
editing functions. Although  
the tags are restricted to a  
number of characters, the  
information can be viewed  
when the track is played back.  
Video codec:  
H.264/MPEG-  
4 AVC  
MPEG4  
WMV9  
WMV9  
Advanced pro-  
file  
Audio codec:  
AAC  
MP3  
WMA9.2 (7, 8,  
9.1, 9.2)  
AVI Container  
Corresponding  
screen size:  
MAX 1920   
1080  
WMA tag  
WMA files can contain a  
WMA tag that is used in the  
same way as an ID3 tag.  
WMA tags carry information  
such as track title and artist  
name.  
Corresponding  
frame rate:  
MAX 60i/30p  
Video codec:  
WMV9  
WMV9  
Advanced pro-  
file  
MP3  
MP3 is an audio compression  
standard determined by a  
working group (MPEG) of the  
ISO (International Standard  
Organization). MP3 com-  
presses audio data to about  
1/10 the size of that on con-  
ventional discs.  
Audio codec:  
WMA9.2 (7, 8,  
9.1, 9.2)  
Windows Media  
Video  
Corresponding  
screen size:  
MAX 1920   
1080  
Corresponding  
frame rate:  
MAX 60i/30p  
WMA  
WMA (Windows Media Audio)  
is an audio compression for-  
mat developed by Microsoft®.  
It compresses files into a size  
smaller than that of MP3 files.  
The decoding formats for  
Terms  
ID3 tag  
This is a method of embed-  
453  
5-11. Tips for operating the audio/visual system  
iPod  
Message  
WMA files are Ver. 7, 8 and 9.  
Windows Media is either a  
registered trademark or trade-  
mark of Microsoft Corpora-  
tion in the United States  
and/or other countries.  
Explanation  
This indicates a  
problem in the  
iPod or its con-  
nection.  
“iPod Error”  
This product includes technol-  
ogy owned by Microsoft Cor-  
poration and cannot be used  
or distributed without a  
This indicates  
“No music files that there is no  
found.”  
music data in the  
iPod.  
license from Microsoft Licens-  
ing, Inc.  
This indicates  
that the software  
version is not  
compatible. Per-  
form the iPod  
firmware  
AAC  
“Please check  
the iPod firm-  
ware version.”  
AAC is short for Advanced  
Audio Coding and refers to an  
audio compression technol-  
ogy standard used with  
updates and try  
again.  
MPEG2 and MPEG4.  
5
This indicates  
that it failed to  
authorize the  
iPod.  
“Unable to  
authorize the  
iPod.”  
Error messages  
USB  
Please check  
your iPod.  
Message  
Explanation  
This indicates a  
problem in the  
USB memory or  
its connection.  
Bluetooth® audio  
“USB Error”  
Message  
Explanation  
“Music tracks not  
supported.  
Please check  
your portable  
player.”  
This indicates a  
problem in the  
This indicates  
that no  
“No music files MP3/WMA/AAC  
®
Bluetooth  
device.  
found.”  
files are included  
in the USB mem-  
ory.  
If the malfunction is not rectified:  
Take your vehicle to your Toyota  
dealer.  
This indicates  
that no video  
files are included  
in the USB mem-  
ory.  
“No video files  
found.”  
454  
Certification  
5-11. Tips for operating the audio/visual system  
For vehicles sold in the U.S.A., Hawaii, Guam, Saipan, American  
Samoa and Puerto Rico  
455  
5-11. Tips for operating the audio/visual system  
For vehicles sold in Canada  
5
456  
5-11. Tips for operating the audio/visual system  
Gracenote  
457  
5-11. Tips for operating the audio/visual system  
For U.S. owners  
5