Vehicle specifications -> Specifications for Your Toyota Rav4 SUV 2020

664  
9-1. Specifications  
9-1.Specifications  
Maintenance data (fuel, oil level, etc.)  
Dimensions and weights  
Except ADVEN-  
TURE grade (for  
the U.S.A.)/Trail 180.9 in. (4595 mm)  
grade (for Can-  
ada)  
*1  
Overall length  
ADVENTURE  
grade (for the  
U.S.A.)/Trail  
grade (for Can-  
ada)  
181.5 in. (4611 mm)  
Except ADVEN-  
TURE grade (for  
the U.S.A.)/Trail 73.0 in. (1855 mm)  
grade (for Can-  
ada)  
*1  
Overall width  
ADVENTURE  
grade (for the  
U.S.A.)/Trail  
grade (for Can-  
ada)  
73.4 in. (1865 mm)  
*2  
*3  
67.0 in. (1701 mm)  
67.2 in. (1706 mm)  
Without bridge  
type roof rail  
*1  
Overall height  
With bridge type  
roof rail  
68.6 in. (1742 mm)  
*1  
105.9 in. (2690 mm)  
Wheelbase  
*2  
63.0 in. (1600 mm)  
62.6 in. (1590 mm)  
Front  
Rear  
*3  
*1  
Tread  
*2  
63.7 in. (1619 mm)  
63.3 in. (1609 mm)  
*3  
665  
9-1. Specifications  
900 lb. (410 kg)  
Vehicle capacity weight (Occupants +  
luggage)  
*4  
1500 lb. (680 kg)  
Trailer Weight Rating (Trailer weight  
+ cargo weight)  
*5  
3500 lb. (1590 kg)  
*1  
:Unladen vehicle  
*2  
*3  
*4  
*5  
:Vehicles without 235/55R19 tires  
:Vehicles with 235/55R19 tires  
:Vehicles without towing package  
:Vehicles with towing package  
Vehicle identification  
Vehicle identification num-  
ber  
The vehicle identification num-  
ber (VIN) is the legal identifier  
for your vehicle. This is the pri-  
mary identification number for  
your Toyota. It is used in regis-  
tering the ownership of your  
vehicle.  
This number is also on the Certi-  
fication Regulation Label.  
This number is stamped on the  
top left of the instrument panel.  
9
Engine number  
On some models, this number is  
also stamped under the right-  
hand front seat.  
The engine number is stamped  
on the engine block as shown.  
666  
9-1. Specifications  
Engine  
Model  
A25A-FKS  
Type  
4-cylinder in line, 4-cycle, gasoline  
3.44 4.07 in. (87.5 103.4 mm)  
Bore and stroke  
Displacement  
Valve clearance  
Drive belt tension  
3
151.8 cu. in. (2487 cm )  
Automatic adjustment  
Automatic adjustment  
Fuel  
Fuel type  
Unleaded gasoline only  
87 (Research Octane Number 91) or  
higher  
Octane Rating  
Fuel tank capacity (Reference) 14.5 gal. (55 L, 12.1 Imp.gal.)  
Lubrication system  
Oil capacity (Drain and refill reference*)  
With filter  
4.8 qt. (4.5 L, 4.0 Imp. qt.)  
4.4 qt. (4.2 L, 3.7 Imp. qt.)  
Without filter  
*
: The engine oil capacity is a reference quantity to be used when changing  
the engine oil. Warm up and turn off the engine, wait more than 5 min-  
utes, and check the oil level on the dipstick.  
Engine oil selection  
used in your Toyota vehicle. Use  
Toyota approved “Toyota Genu-  
Toyota Genuine Motor Oil” is  
667  
9-1. Specifications  
ine Motor Oil” or equivalent to  
satisfy the following grade and  
viscosity.  
viscosity (one with a higher  
value) may be better suited if  
the vehicle is operated at high  
speeds, or under extreme  
load conditions.  
Oil grade:  
API SN/RC multigrade engine  
oil  
How to read oil container label:  
Recommended viscosity:  
SAE 0W-16  
API registered mark is added to  
some oil containers to help you  
select the oil you should use.  
SAE 0W-16 is the best choice  
for good fuel economy and good  
starting in cold weather.  
If SAE 0W-16 is not available,  
SAE 0W-20 oil may be used.  
However, it must be replaced  
with SAE 0W-16 at the next oil  
change.  
A
Outside temperature  
Oil viscosity (0W-16 is explained  
here as an example):  
• The 0W in 0W-16 indicates  
the characteristic of the oil  
which allows cold startability.  
Oils with a lower value before  
the W allow for easier starting  
of the engine in cold weather.  
• The 16 in 0W-16 indicates the  
viscosity characteristic of the  
oil when the oil is at high tem-  
perature. An oil with a higher  
9