Get Lighting Guide for Vauxhall Corsa 4 Door 2020

Lighting

83

Lighting features .......................... 90

Entry lighting .............................. 90

Exit lighting ................................ 91

Vehicle locator lighting .............. 91

Peripheral lighting ...................... 91

Battery discharge protection ...... 91

Exterior lighting

Light switch

Lighting

Exterior lighting ............................ 83

Light switch ................................ 83

Automatic light control ............... 84

High beam ................................. 84

High beam assist ....................... 84

Headlight flash ........................... 85

Headlight range adjustment ...... 85

Headlights when driving

abroad ...................................... 85

Daytime running lights ............... 85

LED headlights .......................... 85

Hazard warning flashers ............ 87

Turn lights .................................. 88

Front fog lights ........................... 88

Rear fog light ............................. 88

Parking lights ............................. 89

Reversing lights ......................... 89

Misted light covers ..................... 89

Interior lighting ............................. 89

Instrument panel illumination

control ....................................... 89

Interior lights .............................. 90

Reading lights ............................ 90

Sunvisor lights ........................... 90

Turn light switch:

AUTO : automatic light control

switches automatically

between daytime running

light and headlight

: sidelights

8

9

: headlights

Control indicator 8 3 74.

Tail lights

Tail lights are illuminated together

with low / high beam and sidelights.

84

Lighting

conditions. The latest setting of the

high beam assist will remain after the

ignition is switched on again.

Glare-free high beam for Matrix-LED

headlights 3 85.

Tunnel detection

When a tunnel is entered, headlights

are switched on immediately.

Automatic light control

High beam

Activation

The high beam assist can be

activated via the vehicle settings

menu in the Info Display.

Info Display 3 76.

High beam is switched on

automatically in dark surroundings at

a speed above 28 mph. High beam is

switched off at a speed below

22 mph, but high beam assist remains

active.

When the automatic light control

function is switched on, the system

switches between daytime running

lights and headlights automatically

depending on the external lighting

conditions and information given by

the wiper system.

The green control indicator B

Push to switch from low to high beam.

Push again to deactivate high beam.

illuminates continuously when the

high beam assist is activated, the blue

A illuminates when high beam is on.

Daytime running light 3 85.

Control indicator B 3 74, A 3 74.

High beam assist switches

automatically to low beam when:

High beam assist

Automatic headlight activation

During poor lighting conditions the

headlights are switched on.

Additionally, headlights are switched

on if the windscreen wipers have

been activated for several wipes.

The system switches from low beam

to high beam and vice versa to

prevent glaring. Once activated, high

beam assist remains active and

switches high beam on and off

depending on surrounding

●

Driving in urban areas.

Camera detects heavy fog.

Lighting

85

●

Rear fog light is switched on.

Oncoming or preceding vehicles

are detected by the camera.

Headlight range adjustment Headlights when driving

abroad

When driving in countries where

If there are no restrictions detected,

the system switches back to high

beam.

traffic drives on the opposite side of

the road, the headlights do not have

to be adjusted.

Deactivation

The system can be deactivated via

the vehicle settings menu in the Info

Display.

Daytime running lights

Daytime running lights increase

visibility of the vehicle during daylight.

The system switches between

daytime running lights and low beam

automatically, depending on the

lighting conditions.

Info Display 3 76.

To adapt headlight range to the

vehicle load to prevent dazzling, turn

thumb wheel X to required position.

Headlight flash

Automatic light control 3 84.

0 : front seats occupied

1 : all seats occupied

LED headlights

2 : all seats occupied and load

compartment laden

The Matrix-LED headlight system

contains a variety of particular LEDs

in each headlight which enables the

control of the adaptive forward

lighting functions.

3 : driver's seat occupied and load

compartment laden

Light distribution and intensity of light

are variably triggered depending on

the lighting conditions, road type and

driving situation. The vehicle adapts

Pull to activate the headlight flash.

86

Lighting

the headlights automatically to the

situation to enable optimal light

performance for the driver.

Town light

Curve light

The adaptive forward lighting and the

Matrix-LED headlights functions can

be deactivated or activated in the

vehicle personalisation menu.

Vehicle personalisation 3 80.

Info Display 3 76.

The glare-free high beam function of

the Matrix-LED headlights are only

available with light switch in position

AUTO.

Activated automatically at a speed up

to approx. 30 mph. The light is wide

and symmetrical.

Particular LEDs, based on steering

angle and speed, are additionally

triggered to improve lighting in

curves. This function is activated at

speeds from 25 mph to 43 mph.

Cornering light

Glare-free high beam

Country light

9 Warning

The glare-free high beam function

may dazzle other road users when

the vehicle is driven in countries

where traffic moves on the

opposite side of the road. E.g.

when the vehicle was designed for

Activated at a speed of up to 25 mph

when turning off. The light consists of

particular LEDs which illuminate the

direction of travel. These LEDs are

triggered depending on the steering

angle or the activation of the turn

lights.

Activated automatically at a speed

above 30 mph when driving in rural

areas. The illumination of the current

lane and the side of the road is

adapted. Oncoming and preceding

vehicles are not dazzled.

Lighting

87

Motorway mode

Hazard warning flashers

left hand drive traffic and it is

driven in a country with right hand

drive traffic.

Switch off glare-free high beam

function whenever you are driving

in countries mentioned above!

The system enables a glare-free high

beam when driving in dark

surroundings.

Activated automatically at a speed

above 65 mph. Illumination is

adapted to the higher speed driven on

motorways. If there is no oncoming

traffic, the visibility on the side of the

vehicle is increased. When following

vehicles ahead or passing, dazzling

for these vehicles is reduced.

Operated by pressing c.

When braking in an emergency, the

hazard warning flashers are switched

on automatically, depending on the

force of deceleration. They are

switched off automatically the first

time you accelerate.

Fault in LED headlight system

Each LED on right or left side is

triggered or faded out particularly

according to the traffic situation. This

gives the best light distribution

without dazzling other road users.

Glare-free high beam is switched on

automatically at a speed above

31 mph. It is switched off at a speed

below 22 mph, but the system

remains active.

When the system detects a failure in

the LED headlight system, it selects a

preset position to avoid dazzling of

oncoming traffic. A warning is

displayed in the Driver Information

Centre.

88

Lighting

Activate temporary flashing by

holding the indicator lever just before

the resistance point. Turn lights will

flash until indicator lever is being

released.

Turn lights

Rear fog light

To activate three flashes, tap the

indicator lever briefly without passing

the resistance point.

Front fog lights

up

: right turn lights

Operated by pressing H.

down : left turn lights

Light switch in position AUTO:

switching on rear fog light will switch

headlights on automatically.

A resistance point can be felt when

moving the indicator lever.

Light switch in position 8: rear fog

light can only be switched on with

front fog lights.

Constant flashing is activated when

the indicator lever is being moved

beyond the resistance point. It is

deactivated when the steering wheel

is moved in the opposite direction or

indicator lever is manually moved

back to its neutral position.

After 20 seconds the volume of the

audible signal will increase if the

speed is above 50 mph.

The vehicle rear fog light is

deactivated when towing a trailer or a

plug is connected with the socket,

e.g. when a bicycle carrier is used.

Operated by pressing >.

Light switch in position AUTO:

switching on front fog lights will switch

headlights on automatically.

Lighting

89

Parking lights

Misted light covers

Interior lighting

Instrument panel

illumination control

The inside of the light housing may

mist up briefly in poor, wet and cold

weather conditions, in heavy rain or

after washing. The mist disappears

quickly by itself. To help, switch on the

headlights.

When the vehicle is parked, the

parking lights on one side can be

activated:

1. Switch off ignition.

Brightness of the following lights can

be adjusted when the exterior lights

are on:

2. Move the lever all the way up

(right parking lights) or down (left

parking lights).

Confirmed by a signal and the

corresponding turn lights control

indicator.

●

instrument panel illumination

Info Display

illuminated switches and

operation elements

Turn thumb wheel F and hold until

the desired brightness is obtained.

Reversing lights

The reversing light comes on when

reverse gear is selected.

90

Lighting

Interior lights

Reading lights

Lighting features

Entry lighting

During entry and exit of the vehicle,

the front and rear courtesy lights

automatically switch on and then off

after a delay.

Welcome lighting

Some or all of the following lights are

switched on for a short time by

unlocking the vehicle with the radio

remote control:

Notice

In the event of an accident with

airbag deployment the courtesy

lights are turned on automatically.

●

headlights

puddle lights

interior lights

Front courtesy light

The number of activated lights

depends on the surrounding light

conditions.

The lighting switches off immediately

when the ignition is switched on.

Operated by pressing z.

Sunvisor lights

Illuminates when the cover is opened.

Starting off 3 102.

This function can be activated or

deactivated in the vehicle

personalisation.

Vehicle personalisation 3 80.

Operate rocker switch:

;

: automatic switching on

and off

press § : on

press 2 : off

Lighting

91

The following lights will additionally

switch on when the driver's door is

opened:

Peripheral lighting

Peripheral lighting allows you to

switch on the position lights, low

beam and number plate lighting using

the remote control.

●

illumination of some switches

Driver Information Centre

door pocket lights

Press D on the remote control to

switch on peripheral lighting.

Press D a second time to switch off

peripheral lighting.

Exit lighting

The following lights are switched on

when the ignition is switched off:

Battery discharge protection

●

headlights

interior lights

centre console lighting

To prevent discharge of the vehicle

battery when the ignition is switched

off, some interior lights are switched

off automatically after some time.

They will switch off automatically after

a delay. This function works only in

the dark.

Vehicle locator lighting

This function allows to locate the

vehicle, e.g., in weak lighting

conditions using the remote control.

The headlights come on and the turn

lights flash for 10 seconds.

Press b on the remote control.

Lighting for Your Vauxhall Corsa 4 Door 2020

Popular Manuals