Seats, restraints
39
All i-Size child restraint systems can
be used on any vehicle seat suitable
for i-Size, i-Size table 3 41.
child's backbone, which is still very
weak, is under less strain in the event
of an accident.
Suitable are child restraint systems
that comply with valid UN ECE
regulations. Check local laws and
regulations for mandatory use of child
restraint systems.
Either a Top-tether strap or a support
leg must be used in addition to the
ISOFIX brackets.
The following child restraints are
recommended for the following
weight classes:
●
Group 0, Group 0+:
In addition to the ISOFIX brackets,
fasten the Top-tether strap to the
Top-tether anchors.
Maxi Cosi Cabriofix with or
without ISOFIX base for children
up to 13 kg
i-Size child seats and vehicle seats
with i-Size approval are marked with
i-Size symbol, see illustration.
ISOFIX child restraint systems of
universal category positions are
marked in the table by IUF 3 41.
●
●
Group I: Duo Plus with ISOFIX
and Top-tether for children from
9 kg to 18 kg
Group II, Group III: Kidfix XP with
or without ISOFIX for children
from 15 kg to 36 kg
Top-tether anchors
Top-tether anchors are marked with
the symbol t for a child seat.
Selecting the right system
The rear seats are the most
convenient location to fasten a child
restraint system.
Children should travel facing
rearwards in the vehicle as long as
possible. This makes sure that the
Ensure that the child restraint system
to be installed is compatible with the
vehicle type.
Ensure that the mounting location of
the child restraint system within the
vehicle is correct, see following
tables.
