198
Vehicle care
7. Remove and replace the bulbs:
Tail light / brake light (1)
Turn light (2)
Number plate light
Have lights repaired by a workshop in
case of failure.
Reverse light (3)
Interior lights
8. Insert the bulb carrier into the light
assembly. Attach plug to the light
assembly. Fit the light assembly in
the recess and tighten the lamp
fixing nut from the inside. Attach
the cover.
Have the following bulbs replaced by
a workshop:
●
●
●
courtesy light, reading lights
load compartment light
instrument panel illumination
Rear fog light
2. Slightly press down the bulb, turn
it anticlockwise and remove it
from the socket.
3. Replace and insert the new bulb
into socket by turning clockwise.
4. Insert the bulb socket into the
reflector and turn clockwise.
Centre high-mounted brake light
Have lights repaired by a workshop in
case of failure.
Bulb check
Switch on the ignition, operate and
check all lights.
1. Turn the bulb holder anticlockwise
and remove it from the reflector
housing.
