Get Instruments and controls Guide for Vauxhall Grandland X SUV 2020

78

Instruments and controls

Power indicator gauge ............... 90

Engine coolant temperature

Engine coolant temperature ...... 97

Preheating ................................. 97

Exhaust filter .............................. 97

AdBlue ....................................... 97

Deflation detection system ........ 98

Engine oil pressure .................... 98

Low fuel ..................................... 98

Charge cord connected ............. 98

Autostop .................................... 98

Exterior light .............................. 98

Low beam .................................. 99

High beam ................................. 99

High beam assist ....................... 99

LED headlights .......................... 99

Front fog lights ........................... 99

Rear fog light ............................. 99

Rain sensor ............................... 99

Cruise control ............................ 99

Adaptive cruise control .............. 99

Vehicle detected ahead ............. 99

Side blind spot alert ................... 99

Active emergency braking ....... 100

Speed limiter ........................... 100

Door open ................................ 100

Instruments and

controls

gauge ....................................... 91

Engine oil level monitor ............. 91

Service display .......................... 91

Control indicators ...................... 92

Turn lights .................................. 92

Seat belt reminder ..................... 93

Airbag and belt tensioners ......... 93

Airbag deactivation .................... 94

Charging system ....................... 94

Malfunction indicator light .......... 94

Service vehicle soon ................. 94

Stop engine ............................... 94

System check ............................ 95

Hybrid system active ................. 95

Hybrid system fault .................... 95

Brake and clutch system ........... 95

Electric parking brake ................ 95

Electric parking brake fault ........ 95

Automatic operation of electric

Controls ....................................... 79

Steering wheel adjustment ........ 79

Steering wheel controls ............. 79

Heated steering wheel ............... 80

Horn ........................................... 80

Pedestrian safety alert ............... 80

Windscreen wiper and washer . . 80

Rear window wiper and

washer ...................................... 82

Outside temperature .................. 83

Clock ......................................... 83

Power outlets ............................. 84

Inductive charging ..................... 86

Cigarette lighter ......................... 87

Ashtrays .................................... 87

parking brake off ....................... 96

Antilock brake system (ABS) ..... 96

Gear shifting .............................. 96

Lane departure warning ............ 96

Lane keep assist ....................... 96

Electronic Stability Control and

Traction Control system ........... 96

Electronic Stability Control and

Traction Control system off ...... 97

Warning lights, gauges and indi‐

cators ........................................... 87

Instrument cluster ...................... 87

Speedometer ............................. 89

Odometer .................................. 89

Trip odometer ............................ 89

Tachometer ............................... 89

Fuel gauge ................................ 90

Battery gauge ............................ 90

Displays ..................................... 100

Driver Information Centre ........ 100

Info Display .............................. 102

Vehicle messages ...................... 106

Warning chimes ....................... 106

Instruments and controls

Steering wheel controls

79

Vehicle personalisation .............. 107

Telematics services ................... 110

Vauxhall Connect .................... 110

Controls

Steering wheel adjustment

Cruise control and speed limiter are

operated via the controls on the left

side of the steering wheel.

Additionally, adaptive cruise control

can be set by using the controls on the

left side of the steering wheel.

Infotainment system can be operated

via the controls on the right side of the

steering wheel.

Unlock lever, adjust steering wheel,

then engage lever and ensure it is

fully locked.

Do not adjust steering wheel unless

vehicle is stationary and steering

wheel lock has been released.

Driver assistance systems 3 159.

Further information is available in the

Infotainment manual.

80

Instruments and controls

Heated steering wheel

Horn

Windscreen wiper and

washer

Windscreen wiper with adjustable

wiper interval

Activate heating by pressing *.

Activation is indicated by the LED in

the button.

Heating is operational when the

engine is running and during an

Autostop.

Press j.

Pedestrian safety alert

The sound of the pedestrian safety

alert is generated to indicate the

vehicle presence to pedestrians when

combustion engine is off. It is active

up to 12 mph.

HI : fast

LO : slow

INT : interval wiping

OFF : off

Stop-start system 3 138.

For a single wipe when the

windscreen wiper is off, press the

lever down to position 1x.

Do not use if the windscreen is frozen.

Switch off in car washes.

Instruments and controls

81

To activate interval wiping mode the

next time ignition is switched on,

press the lever downwards to position

OFF and back to INT.

Windscreen wiper with rain sensor

switched on, press the lever

downwards to position OFF and back

to AUTO.

For a single wipe when the

windscreen wiper is off, press the

Adjustable wiper interval

lever downwards to position 1x.

Do not use if the windscreen is frozen.

Switch off in car washes.

Adjustable sensitivity of the rain

sensor

HI

: fast

LO

: slow

AUTO : automatic wiping with rain

sensor

OFF : off

Wiper lever in position INT.

Turn the adjuster wheel to adjust the

desired wipe interval.

In AUTO position, the rain sensor

detects the amount of water on the

windscreen and automatically

regulates the frequency of the

windscreen wiper. If ignition is

switched off, automatic wiping mode

is deactivated. To activate automatic

wiping mode the next time ignition is

Turn the adjuster wheel to adjust the

sensitivity.

Make sure the sensor is not blocked

3 38, 3 10.

Control indicator < 3 80.

82

Instruments and controls

Activation or deactivation of this

function can be changed in the

Vehicle personalisation menu 3 107.

Windscreen washer

Rear window wiper and

washer

Rear window wiper

Rear window washer

Pull lever. Washer fluid is sprayed

onto the windscreen and the wiper

wipes a few times.

Washer fluid 3 215.

OFF : off

Push lever.

INT : intermittent operation

ON : continuous operation

Washer fluid is sprayed onto the rear

window and the wiper wipes a few

times.

The rear window washer system is

deactivated when the fluid level is

low.

Do not use if the rear window is

frozen.

Switch off in car washes.

The rear window wiper comes on

automatically when the windscreen

wiper is switched on and reverse gear

is engaged.

Washer fluid 3 215.

Instruments and controls

7'' Colour Info Display

83

Outside temperature

Clock

A drop in temperature is indicated

immediately and a rise in temperature

after a time delay.

Date and time are shown in the Info

Display.

Press ; and then select Settings.

Select Time and Date to display the

respective submenu.

Info Display 3 102.

Graphic Info Display

Press MENU to open the menu page.

Illustration shows an example.

Set Time Format

If outside temperature drops to 3 °C,

a warning message is displayed in the

Driver Information Centre.

To select the desired time format,

touch 12h or 24h.

Select ˆ.

Select Display configuration.

Select Date and time adjustment.

Set successively the respective

values for date and time by using the

four way switch. Confirm with OK.

Set Date Format

9 Warning

To select the desired date format,

select Set Date Format and choose

between the available options in the

submenu.

The road surface may already be

icy even though the display

indicates a few degrees above 0

°C.

84

Instruments and controls

Auto Set

Power outlets

To choose whether time and date are

to be set automatically or manually,

select Auto Set.

For time and date to be set

automatically, select On - RDS.

For time and date to be set manually,

select Off - Manual. If Auto Set is set

to Off - Manual, the submenu items

Set Time and Set Date become

available.

Set time and date

Select Setting the time-date.

To adjust the time and date settings,

To change the time and date formats,

select the respective tabs and then

select the desired formats.

By default the displayed time and

date are automatically adjusted by

the system.

A 12 V power outlet is located behind

the storage cover. Press cover to

open.

select Set Time or Set Date.

Touch + or - to adjust the settings.

8'' Colour Info Display

Press SET and then select

OPTIONS.

To manually adjust the displayed time

and date:

Select the Time tab.

Set Synchronization with GPS (UTC)

to Off and then select the Time field

to set the desired time.

Select the Date tab and then select

the Date: field to set the desired date.

Instruments and controls

85

A 12 V power outlets is also located

in the rear console.

Do not damage the outlet by using

unsuitable plugs.

Stop-start system 3 138.

USB ports

A 230 V power outlet may also be

located in the rear console.

Do not exceed the maximum power

At the left sidewall in the load

compartment, another 12 V power

outlet is located.

Do not exceed the maximum power

consumption of 120 W.

consumption of 150 W.

With ignition off, the power outlets are

deactivated. Additionally the power

outlets are deactivated in the event of

low vehicle battery voltage.

A USB port is located behind the

storage cover. Press cover to open.

Electrical accessories that are

connected must comply with the

electromagnetic compatibility

requirements laid down in

DIN VDE 40 839.

Do not connect any current-delivering

accessories, e.g. electrical charging

devices or batteries.

86

Instruments and controls

Inductive charging

9 Warning

Inductive charging can affect the

operation of implanted

pacemakers or other medical

devices. If applicable, seek

medical advice before using the

inductive charging device.

9 Warning

A further USB port may be located in

the rear console.

To charge a device, the ignition must

be switched on.

To charge a mobile device:

Remove any metal objects from

the charging device before

charging a mobile device, as these

objects could become very hot.

The USB ports are prepared for

charging external devices and

provide a data connection to the

Infotainment system. For further

information, see Infotainment

manual.

1. Remove all objects from the

charging device.

2. Place the mobile device with the

display facing upwards on the

charging device in the storage.

Use the elastic band to secure the

mobile device.

Charging status is indicated in the

LED: illuminates green, when mobile

device is charging.

Notice

The sockets must always be kept

clean and dry.

PMA or Qi compatible mobile devices

can be charged inductively.

Instruments and controls

87

On some mobile devices, a back

cover with an integrated coil or a

jacket may be required to use

inductive charging.

Protective cover for the mobile device

could have impact on the inductive

charging.

In the event that the mobile device is

not charging properly, rotate it 180°

and place it on the charging device

again.

Press in cigarette lighter. It switches

off automatically once the element is

glowing. Pull out cigarette lighter.

Warning lights, gauges

and indicators

Instrument cluster

Ashtrays

The following instrument cluster is

available:

Caution

To be used only for ash and not for

combustible rubbish.

Cigarette lighter

Overview

O

X

Turn lights 3 92

Seat belt reminder 3 93

A portable ashtray can be placed in

the cupholders.

v

Airbag and belt tensioners

3 93

The cigarette lighter is located behind

the storage cover. Press cover to

open.

V

Airbag deactivation 3 94

88

Instruments and controls

b

m

B

Ø

p

Z

Charging system 3 94

Electronic Stability Control

and Traction Control

system 3 96

Cruise control 3 99

Malfunction indicator light

3 94

Side blind spot alert 3 99

Active emergency braking

3 100

W o

Engine coolant tempera‐

ture high 3 97

C

Service vehicle soon

3 94

ß

Speed limiter 3 100

Door open 3 100

!

%

Y

Preheating 3 97

Exhaust filter 3 97

AdBlue 3 97

STOP Stop engine 3 94

h

J

System check 3 95

i

Hybrid system fault 3 95

R

Brake and clutch system

3 95

READY Hybrid system active

Deflation detection system

3 98

w

3 95

m,

o

Electric parking brake

3 95, automatic operation

of electric parking brake off

3 96

j

Charge cord connected

3 98

I

Y o

D

Engine oil pressure 3 98

Low fuel 3 98

Electronic Stability Control

99

Autostop 3 98

and Traction Control

E

Electric parking brake fault

3 95

system off 3 97

8

9

C

f

>

Exterior light 3 98

Low beam 3 99

u

Antilock brake system

(ABS) 3 96

High beam 3 99

R

Gear shifting 3 96

High beam assist 3 99

Front fog lights 3 99

Rear fog light 3 99

Rain sensor 3 99

)

Lane departure warning

3 96

ø

L

Lane keep assist 3 96

<

Instruments and controls

89

The recorded distance since the last

reset is displayed in the Driver

Information Centre.

Driver Information Centre

Speedometer

Trip odometer counts up to

9,999 miles.

Press L for 2 seconds to reset trip

odometer.

Two trip odometer pages are

selectable in the trip / fuel information

menu for different trips 3 100.

Tachometer

Indicates vehicle speed.

Trip odometer

Odometer

The total recorded distance is

displayed in miles.

Displays the engine speed.

Drive in a low engine speed range for

each gear as much as possible.

90

Instruments and controls

A red marker indicates the beginning

of the warning zone of excessive

revolutions. For Diesel engines, the

warning zone starts at 5000

revolutions per minute. For petrol

engines, the warning zone starts at

7000 revolutions per minute.

Displays the fuel level.

Control indicator o illuminates if the

fuel level is low.

Power indicator gauge

Never run the fuel tank dry.

Because of the fuel remaining in the

tank, the top-up quantity may be less

than the specified fuel tank capacity.

Caution

Battery gauge

If the needle is in the red warning

zone, the maximum permitted

engine speed is exceeded. Engine

at risk.

The power indicator gauge informs

about the current energy situation of

the vehicle.

Fuel gauge

Charge : Battery is being charged

with energy resulting from

braking or deceleration of

the vehicle

Eco

: An optimum in energy is

accessible in all driving

modes

The battery gauge displays the high

voltage battery state of charge.

Power : Vehicle is driven in a

dynamic driving style with

focus on performance

Instruments and controls

Service display

91

Engine coolant temperature

gauge

Caution

The service system informs when to

change the engine oil and filter or a

vehicle service is required. Based on

driving conditions, the interval at

which an engine oil and filter change

is required can vary considerably.

If engine coolant temperature is

too high, stop vehicle, switch off

engine. Danger to engine. Check

coolant level.

Service information 3 250.

Engine oil level monitor

A required service due is displayed in

the Driver Information Centre for

7 seconds after switching on the

ignition.

The state of the engine oil level is

displayed in the Driver Information

Centre for a few seconds following

the service information after switching

on the ignition.

If no service is required for the next

1800 miles or more no service

A proper state of engine oil level is

indicated by a message.

information appears in the display.

Displays the coolant temperature.

If service is required within the next

1800 miles, the remaining distance or

time duration is indicated for several

seconds. Simultaneously C

If engine oil level is low, I flashes

and a message is indicated,

accompanied by the C indicator.

Confirm engine oil level by using the

dipstick and top up engine oil

respectively.

50 : engine operating temperature

not yet reached

90 : normal operating temperature

130 : temperature too high

illuminates permanently as reminder.

Control indicator o illuminates if

coolant temperature is too high.

Switch off engine immediately.

If service is required in less than

600 miles, C flashes and then

illuminates permanently. Remaining

distance or time duration is indicated

for several seconds.

Engine oil 3 214.

A fault of measurement is indicated

by a message. Check engine oil level

manually by using the dipstick.

92

Instruments and controls

Overdued service is indicated by a

message in the Driver Information

Centre which indicates the overdued

distance. C flashes and then

illuminates permanently until service

is executed.

ignition is switched on, most control

indicators will illuminate briefly as a

functionality test.

Retrieving service information

The control indicator colours mean:

red

: danger, important reminder

yellow : warning, information, fault

green : confirmation of activation

blue : confirmation of activation

white : confirmation of activation

Reset of service interval

After each service, the service

indicator must be reset to ensure

proper functionality. It is

See all control indicators on different

instrument clusters 3 87.

recommended to seek the assistance

of a workshop.

If service is executed by yourself,

operate as following:

Turn lights

To retrieve the status of the service

information at any time press button

CHECK. The service information is

displayed for a few seconds.

O illuminates or flashes green.

●

switch off ignition

press and hold button CHECK

switch on ignition, the distance

indication begins a countdown

Illuminates briefly

The parking lights are switched on.

Service information 3 250.

Flashes

Turn lights or the hazard warning

flashers are activated.

Rapid flashing: failure of a turn light or

associated fuse, failure of turn light on

trailer.

Bulb replacement 3 219.

Turn lights 3 117.

●

when the display indicates =0,

release the button

Control indicators

The control indicators described are

not present in all vehicles. The

description applies to all instrument

versions. Depending on the

The symbol C disappears.

equipment, the position of the control

indicators may vary. When the

Instruments and controls

93

on, if the seat belt of any

occupied seat has not been

fastened.

airbags and belt pretensioners may

fail to trigger in the event of an

accident.

Deployment of the belt pretensioners

or airbags is indicated by continuous

illumination of v.

Seat belt reminder

Seat belt reminder on all seats

X illuminates or flashes red in the

instrument cluster together with the

indication in the roof console for each

seat belt.

●

After driving off, X in the

instrument cluster and the

symbol for the respective seat in

the roof console flashes for a

certain time together with a

chime. After a certain time of

driving X illuminates constantly

until the seat belt of the

9 Warning

Have the cause of the fault

remedied immediately by a

workshop.

respective seat has been

fastened or if any passenger has

unfastened the seat belt.

Belt pretensioners 3 51.

Airbag system 3 54.

Seat belts 3 51.

Airbag and belt tensioners

v illuminates red.

When the ignition is switched on, the

control indicator illuminates for

approx. 4 seconds.

●

When the ignition is switched on,

X in the instrument cluster and

the symbol for the respective

seat in the roof console comes

If it does not illuminate, does not

extinguish after 4 seconds or

illuminates whilst driving, there is a

fault in the airbag system. Seek the

assistance of a workshop. The

94

Instruments and controls

Illuminates when the engine is

running

Flashes when the engine is

running

Airbag deactivation

Stop, switch off engine. Vehicle

battery is not charging. Engine

cooling may be interrupted. The

brake servo unit may cease to be

effective. Seek the assistance of a

workshop.

Fault that could lead to catalytic

converter damage. Ease up on the

accelerator until the flashing stops.

Seek the assistance of a workshop

immediately.

Service vehicle soon

Malfunction indicator light

C illuminates yellow.

Z illuminates or flashes yellow.

Illuminates briefly when the ignition is

switched on.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

May illuminate together with other

control indicators and a

ÓON illuminates yellow.

The front passenger airbag is

activated.

*OFF illuminates yellow.

The front passenger airbag is

deactivated.

corresponding message in the Driver

Illuminates when the engine is

running

Fault in the emission control system.

The permitted emission limits may be

exceeded. Seek the assistance of a

workshop immediately.

Information Centre.

Seek the assistance of a workshop

immediately.

Airbag deactivation 3 59.

Stop engine

Y illuminates red.

Charging system

p illuminates red.

Illuminates briefly when the ignition is

switched on.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Instruments and controls

95

Illuminates together with other control

indicators, accompanied by a warning

chime and a corresponding message

in the Driver Information Centre.

Stop engine immediately and seek

the assistance of a workshop.

The hybrid system has a fault.

Switch off ignition and seek the

assistance of a workshop.

9 Warning

Have the cause of the fault

remedied immediately by a

workshop.

Brake and clutch system

R illuminates red.

The brake and clutch fluid level is too

low.

o illuminates yellow.

System check

Illuminates

J illuminates yellow or red.

Automatic operation is deactivated or

faulty. Activate automatic operation

again or have the cause remedied by

a workshop in the event of a fault.

9 Warning

Illuminates yellow

A minor engine fault has been

detected.

Stop. Do not continue your

journey. Consult a workshop.

Automatic operation 3 153.

Illuminates red

Brake fluid 3 216.

Electric parking brake fault

A major engine fault has been

detected.

Stop engine as soon as possible and

seek the assistance of a workshop.

Electric parking brake

E illuminates yellow.

m illuminates or flashes red.

Illuminates

Electric parking brake has a fault

3 153.

Illuminates

Electric parking brake is applied

3 153.

Hybrid system active

READY illuminates green. The hybrid

system ist active.

9 Warning

Flashes

Have the cause of the fault

remedied immediately by a

workshop.

Electric parking brake is not applied

automatically. The application or the

release are faulty.

Hybrid system fault

i illuminates red.

96

Instruments and controls

fault in the ABS. The brake system

remains operational but without ABS

regulation.

Illuminates green

The system is switched on and ready

to operate.

Automatic operation of

electric parking brake off

o illuminates yellow.

Antilock brake system 3 152.

Illuminates yellow

The system approaches a detected

lane marking without using the turn

light in that direction.

Illuminates

Gear shifting

Automatic operation is deactivated or

faulty. In the event of a fault, o

illuminates together with other control

indicators or it is accompanied by a

corresponding message in the Driver

Information Centre.

Activate automatic operation again or

have the cause remedied by a

workshop in the event of a fault.

R with the number of a higher gear is

indicated, when upshifting is

recommended for fuel saving

reasons.

Flashes yellow

The system recognizes that the lane

is departed significantly.

Lane departure warning

Lane keep assist 3 191.

) illuminates green or flashes yellow.

Illuminates green

System is switched on and ready to

operate.

Automatic operation 3 153.

Electronic Stability Control

and Traction Control system

b illuminates or flashes yellow.

Antilock brake system

(ABS)

u illuminates yellow.

Illuminates for a few seconds after the

ignition is switched on. The system is

ready for operation when the control

indicator extinguishes.

Flashes yellow

System recognises an unintended

lane change.

Illuminates

A fault in the system is present.

Continued driving is possible. Driving

stability, however, may deteriorate

depending on road surface

conditions.

Have the cause of the fault remedied

by a workshop.

Lane departure warning 3 190.

Lane keep assist

If the control indicator does not

extinguish after a few seconds, or if it

illuminates while driving, there is a

a illuminates green or yellow, or

flashes yellow.

Instruments and controls

Illuminates temporarily

97

Flashes

Caution

The system is actively engaged.

Engine output may be reduced and

the vehicle may be braked

Start of saturation of the exhaust filter.

Start cleaning process as soon as

possible by driving at a vehicle speed

of at least 40 mph.

Coolant temperature too high.

automatically to a small degree.

Check coolant level immediately

3 215.

Electronic Stability Control and

Traction Control system 3 156.

Selective ride control 3 157.

Illuminates constantly

Indication of a low additive level. Seek

the assistance of a workshop.

If there is sufficient coolant, consult a

workshop.

Exhaust filter 3 141.

Preheating

Electronic Stability Control

and Traction Control system

off

! illuminates yellow.

AdBlue

Preheating of diesel engine is

activated. Only activates when

outside temperature is low. Start the

engine when control indicator

extinguishes.

Y flashes or illuminates yellow.

9 illuminates yellow. The system has

been deactivated.

Electronic Stability Control and

Traction Control system 3 156.

Illuminates yellow

The remaining driving range is

between 370 miles and 1500 miles.

Starting the engine 3 136.

Selective ride control 3 157.

Flashes yellow

The remaining driving range is

between 0 and 370 miles.

AdBlue level is low. Refill AdBlue

soon to avoid prevention of the

engine start. Up to 10 l of AdBlue can

be added.

Exhaust filter

Engine coolant temperature

o illuminates red.

% or C illuminates yellow.

The exhaust filter requires cleaning.

Continue driving until the control

indicator extinguishes.

Illuminates when the engine is

running

Stop, switch off engine.

AdBlue 3 142.

98

Instruments and controls

1. Select neutral gear.

Deflation detection system

Charge cord connected

2. Move out of the flow of traffic as

quickly as possible without

impeding other vehicles.

j illuminates red.

w illuminates or flashes yellow.

The vehicle plug of the charge cord is

still connected to the charge port. The

vehicle cannot be started.

Disconnect the vehicle plug from the

charge port and close the charge port

door.

Illuminates

Tyre pressure loss in one or more

wheels. Stop immediately and check

tyre pressure.

3. Switch off ignition.

9 Warning

When the engine is off,

Flashes

considerably more force is needed

to brake and steer. During an

Autostop the brake servo unit will

still be operational.

Fault in system. Consult a workshop.

Deflation detection system 3 232.

Autostop

D illuminates or flashes green.

Illuminates green

Engine is in an Autostop.

Do not remove key until vehicle is

stationary, otherwise the steering

wheel lock could engage

unexpectedly.

Engine oil pressure

I illuminates red.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Flashes green

Autostop is temporarily unavailable,

or Autostop mode is invoked

automatically.

Keep engine turned off and let the

vehicle be towed to a workshop.

Illuminates when the engine is

running

Stop-start system 3 138.

Low fuel

o illuminates yellow.

Level in fuel tank is too low.

Refuelling 3 203.

Bleeding the diesel fuel system

3 218.

Caution

Exterior light

8 illuminates green.

The exterior lights are on 3 112.

Engine lubrication may be

interrupted. This may result in

damage to the engine and / or

locking of the drive wheels.

Instruments and controls

99

C illuminates in the Driver

Low beam

9 illuminates green.

Illuminated when low beam is on.

Rear fog light

r illuminates yellow.

The rear fog light is on 3 118.

Information Centre.

m illuminates white

The system is on.

High beam

Rain sensor

m illuminates green

C illuminates blue.

< illuminates green.

Adaptive cruise control is active.

Illuminates when high beam is on,

during headlight flash 3 113.

Illuminated when rain sensor position

on wiper lever is selected.

Windscreen wiper and washer 3 80.

When adaptive cruise control is on or

active, C with the set speed is

indicated in the Driver Information

Centre.

High beam assist

f illuminates green.

Cruise control

Adaptive cruise control 3 164.

The high beam assist is activated

3 114.

m illuminates white or green.

Vehicle detected ahead

Illuminates white

The system is on.

A illuminates green.

LED headlights

C illuminates and a warning

message is displayed in the Driver

Information Centre.

Illuminates green

A vehicle ahead is detected in the

same lane.

Adaptive cruise control 3 164.

Forward collision alert 3 170.

Illuminates green

Cruise control is active. Set speed is

indicated in the Driver Information

Centre.

Seek the assistance of a workshop.

Cruise control 3 159.

Front fog lights

> illuminates green.

The front fog lights are on 3 118.

Adaptive cruise control

Side blind spot alert

B illuminates green.

m illuminates white or green.

The system is active 3 184.

100

Instruments and controls

Active emergency braking

Speed limiter

Displays

ß illuminates in the Driver

Information Centre when speed

limiter is active. Set speed is indicated

alongside ß symbol.

m illuminates or flashes yellow.

Driver Information Centre

Illuminates

The Driver Information Centre is

located in the instrument cluster.

The system has been deactivated or

a fault has been detected.

Speed limiter 3 162.

Driver Information Centre indicates:

●

overall and trip odometer

digital speed indication

trip / fuel information menu

gear shift indication

service information

vehicle and warning messages

driver assistance messages

pop-up messages

Additionally, a warning message is

displayed in the Driver Information

Centre.

Check the reason of the deactivation

3 172 and in case of a system fault,

seek the assistance of a workshop.

Door open

h illuminates red.

A door or the tailgate is open.

Notice

m also illuminates if the seat belts

of the front passengers are not

fastened. In this case, active

AdBlue information

powerflow

range autonomy

emergency braking is deactivated.

Flashes

The system is actively engaged.

Depending on the situation, the

vehicle may automatically brake

moderately or hard.

Selecting menus and functions

The menus and functions can be

selected via the buttons on the

indicator lever.

Forward collision alert 3 170.

Front pedestrian protection 3 175.

Instruments and controls

101

Differerent pages with combined

information can be selected.

Turn the adjuster wheel to select a

page.

Information page:

Fuel range

Range is calculated from current fuel

level and current consumption. The

display shows average values.

After refuelling, the range is updated

automatically after a brief delay.

Turn the adjuster wheel to select a

page in the trip / fuel information

menu.

Press SET / CLR to confirm or reset

a function.

Vehicle and service messages are

popped up in the Driver Information

Centre if required. Scroll messages

by turning the adjuster wheel.

Confirm messages by pressing

SET / CLR.

Press CHECK to switch between the

respective menus.

Vehicle messages 3 106.

When the fuel level is low, a message

appears on the display and the

control indicator o in the fuel gauge

illuminates 3 98.

Instantaneous Fuel Consumption

Display of the instantaneous

consumption.

Trip / fuel information menu

Trip 1 page:

Average speed

Display of average speed. The

measurement can be reset at any

time.

Additionally, some menus can be

selected via the CHECK button.

Average fuel consumption

102

Instruments and controls

Display of average consumption. The

measurement can be reset at any

time and starts with a default value.

Distance travelled

Displays the current distance for trip

1 since the reset.

The values of trip 1 page can be reset

by pressing SET / CLR for a few

seconds.

Digital speed page

Digital display of the instantaneous

speed.

Powerflow

Displays the current powerflow in the

hybrid system, e.g., when the vehicle

is operating in electric mode or when

energy is regenerated.

Autostop time counter

A time counter calculates the time

spent in Autostop during a journey. It

resets to zero every time the ignition

is switched on.

Range autonomy

Displays the selected drive mode, the

range of the high voltage battery and

the combined range, i.e., the range of

the high voltage battery and the fuel

tank.

Compass page

Displays the geographic direction of

driving.

Trip 2 page:

Average speed

Display of average speed. The

measurement can be reset at any

time.

Blank page

Info Display

No trip / fuel information is displayed.

The Info Display is located in the

instrument panel near the instrument

cluster.

Average fuel consumption

AdBlue

Display of average consumption. The

measurement can be reset at any

time and starts with a default value.

Distance travelled

Displays the current distance for trip

2 since a certain reset.

The values of trip 2 page can be reset

by pressing SET / CLR for a few

seconds.

Press CHECK repeatedly until the

AdBlue menu is shown.

Depending on the vehicle

configuration the vehicle has a

AdBlue range

●

Graphic Info Display

or

Indicates an estimate of the AdBlue

level. A message indicates whether

the level is sufficient or low.

●

7'' Colour Info Display with

touchscreen functionality

3 142.

or

●

8'' Colour Info Display with

touchscreen functionality

Instruments and controls

103

The Info Displays can indicate:

●

settings for programmable

7'' Colour Info Display

charging 3 197

●

time 3 83

outside temperature 3 83

date 3 83

Infotainment system, see

description in the Infotainment

manual

Selecting menus and settings

Menus and settings are accessed via

the display.

settings for eSave function

Graphic Info Display

●

indication of rear view camera

3 188

indication of panoramic view

system 3 185

indication of parking assist

instructions 3 176

navigation, see description in the

Infotainment manual

vehicle and system messages

3 106

settings for vehicle

personalisation 3 107

indication of the current

powerflow within the hybrid

system

Press X to switch on the display.

Press ; to display the homepage.

Touch required menu display icon

with the finger.

Touch a respective icon to confirm a

selection.

Touch 9 to return to the next higher

menu level.

Press X to switch on the display.

Press MENU to select main menu

page.

Press èäåé to select a menu page.

Press OK to confirm a selection.

Press BACK to exit a menu without

changing a setting.

●

indication of the average fuel and

power consumption

Press ; to return to the homepage.

104

Instruments and controls

For further information, see

Infotainment manual.

Press SET to select system settings

(units, language, time and date).

Vehicle personalisation 3 107.

Press Í to select vehicle settings or

driving functions.

8'' Colour Info Display

Touch required menu display icon or

a function with the finger.

Confirm a required function or

selection by touching.

Selecting menus and settings

There are three options to operate the

display:

Touch r on the display to exit a

●

via buttons below the display

by touching the touchscreen with

the finger

menu without changing a setting.

For further information, see

Infotainment manual.

1. Press m.

●

via speech recognition

2. Select Flow.

Speech recognition

Description see Infotainment manual.

Button and touch operation

Different colours show which engine

is used and whether energy is

regenerated.

Vehicle personalisation 3 107.

Powerflow

●

green: electric engine operating

orange: combustion engine

operating

This menu displays the current

energy flow within the hybrid system.

The components will be highlighted

when they are active.

●

blue: regenerating energy

Average consumption

This menu displays the average

power and fuel consumption during

the current trip. The current trip is

subdivided into time steps. For each

Press X to switch on the display.

Instruments and controls

105

time step, the average consumption

is displayed. The time steps can be

modified.

of the vehicle. This energy is

partially used to recharge the

battery.

Fuel consumption

The orange bars show the average

fuel consumption in litre per 100

miles.

eSave function

This function allows to provide

electrical energy of the high voltage

battery for a later use, e.g. for driving

in areas restricted to electrical

vehicles. It is possible to reserve the

complete electrical energy of the

battery or a part of it.

1. Press m.

2. Select eSave.

3. Select the distance for which

1. Press m.

electrical is to be reserved or

2. Select Statistics.

reserve the whole capacity of the

high voltage battery.

Notice

If the energy requested exceeds the

energy of the high voltage battery,

the combustion engine charges the

battery. This results in a loss of

performance and a higher fuel

consumption.

3. Press + and - to modify the time

steps.

4. Press ON.

Power consumption

The consumption of electrial power is

displayed in kWh/100 miles.

●

The green bars show the electric

energy comsumed from the

battery.

The function can be activated in the

Colour Info Display.

The blue bars show the electric

energy generated from the

braking and deceleration phases

106

Instruments and controls

Messages in the

Colour Info Display

Vehicle messages

Messages are indicated in the Driver

Information Centre, in some cases

together with a warning chime.

Some important messages may

appear additionally in the

Info Display. Some messages only

pop-up for a few seconds.

Warning chimes

The warning chime regarding not

fastened seat belts has priority over

any other warning chime.

5. To use the reserved electrical

energy change to electric mode.

The setting of this function is not

stored when the ignition is switched

off.

When starting the engine or whilst

driving

A warning chime will sound when

●

a seat belt is not fastened

a door or the tailgate is not fully

closed

Smartphone app

With the myVauxhall smartphone

app, some vehicle functions can be

operated / displayed.

To operate these functions, download

the app from Apple App Store or

Google Play Store.

Press SET / CLR to confirm a

message.

●

a certain speed is exceeded with

parking brake applied

cruise control deactivates

automatically

a programmed speed or speed

limit is exceeded

Ia warning message appears in

the Driver Information Centre

Vehicle and service messages

The vehicle messages are displayed

as text. Follow the instructions given

in the messages.

Instruments and controls

107

●

the electronic key is not in the

passenger compartment

the parking assist detects an

object

an unintended lane change

occurs

the exhaust filter has reached the

maximum filling level

Select ˆ Personalisation-

configuration I OK.

Vehicle personalisation

The vehicle's behaviour can be

personalised by changing the settings

in the Info Display.

Depending on vehicle equipment and

country-specific regulations some of

the functions described below may

not be available.

Unit settings

Select Display configuration I OK.

Select Choise of units I OK.

Select desired settings I OK.

Language settings

Select Display configuration I OK.

Select Choise of language I OK.

Select desired language I OK.

If several warnings appear at the

same time, only one warning chime

will sound

Some functions are only displayed or

active when the engine is running.

Graphic Info Display

When the vehicle is parked and /

or the driver's door is opened

●

Vehicle settings

Select Define vehicle parameters I

With exterior lights on.

OK.

In the corresponding submenus the

During an Autostop

following settings can be changed:

●

If the driver's door is opened.

If any condition for a restart of the

engine is not fulfilled.

●

Lighting

Follow me home headlamps:

Activation and setting duration

time.

Welcome lighting: Activation and

setting duration time.

Comfort

Press MENU to open the menu page.

Use four-way button to operate the

display:

Ambient lighting: Activation /

deactivation.

108

Instruments and controls

Rear wiper in reverse gear:

Activation / deactivation.

Vehicle

Unlocking boot only: Activation /

deactivation.

Plip action: Driver / all doors.

Driving assistance

Fatigue Detection system:

Activation / deactivation.

Change units for Consumption and

Distance and Temperature.

Forward Collision Alert: Activates

or deactivates the forward

collision alert auto brake, adjusts

the sensitivity of the forward

collision alert.

●

Language settings

Select Language.

Change language by touching the

respective entry.

●

Comfort and Convenience

Auto Wipe in Reverse Gear:

Activates or deactivates

automatic switching on of the

rear window wiper when reverse

gear is engaged.

Vehicle settings

Select Vehicle.

In the corresponding submenus the

following settings can be changed:

Speed recommendation:

Activation / deactivation.

Lighting

●

Collision / Detection Systems

Ambient Lighting: Activates or

deactivates the ambient lighting

and adjusts its brightness.

Welcome Lighting: Activates or

deactivates and changes the

duration of welcome lighting.

Exit Lighting: Activates or

deactivates and changes the

duration of exit lighting.

7" Colour Info Display

Side Blind Spot Alert: Activates

or deactivates side blind spot

alert.

Drowsy Driver Alert: Activates or

deactivates the driver

drowsiness system.

Speed Limit Information:

Activates or deactivates the

speed limit information by traffic

sign recognition.

Rear View Camera Guidelines:

Activates or deactivates the rear

view camera guidelines on the

Info Display.

●

Remote Lock, Unlock, Start

Remote Door Unlock: Changes

the configuration to unlock the

driver's door only or all doors

when pressing O on the remote

control.

Unit settings

Select Units.

Instruments and controls

109

Unlock boot only: Activates or

deactivates unlocking the tailgate

only when pressing T on the

remote control.

Language settings

Select Languages.

Change language by touching the

respective entry.

doors when pressing O on the

remote control.

Door unlock: Boot only: Activates

or deactivates unlocking the

tailgate only when pressing T

on the remote control.

Motorised tailgate/door:

Activates or deactivates the

opening or closing of the power

tailgate.

Confirm with G.

8" Colour Info Display

Vehicle settings

Hands-Free opening: Activates

or deactivates the function.

●

Safety

Recommended speed display:

Activates or deactivates the

speed limit information by traffic

sign recognition.

Active safety brake: Activates or

deactivates active emergency

braking and the forward collision

alert, the alert sensitivity can be

selected.

Mirror adaptation in reverse:

Adjusts the exterior mirrors if

reverse gear is engaged to

facilitate sidewalks visibility.

Press SET to open settings menu.

Use touch buttons to operate the

display.

Press Í.

Select Vehicle settings.

In the corresponding submenus the

following settings can be changed:

Unit settings

Select System settings.

Change units for Distance and fuel

consumption and Temperature.

●

Vehicle access

Door unlock: Driver only:

Changes the configuration to

unlock the driver's door only or all

Confirm with G.

110

Instruments and controls

Driver's attention warning:

Driving functions

Telematics services

Activates or deactivates the

driver drowsiness system.

Vauxhall Connect

Rear wiper in reverse: Activates

or deactivates automatic

switching on of the rear window

wiper when reverse gear is

engaged.

Driving lighting

Directional headlamps: Activates

or deactivates the function.

Vauxhall Connect comprises multiple

connected services accessible via

app, online or within the vehicle.

Notice

Full functionality of

●

Vauxhall Connect is subject to

registration and proper activation.

Connected services may include live

navigation such as online traffic

information and vehicle status and

information such as maintenance

alerts.

Services accessible within the vehicle

also include emergency call and

breakdown call. These functions are

automatically activated. Terms and

conditions apply.

Emergency call function and

breakdown call function are operated

by the buttons in the overhead

console.

Comfort lighting

Guide-me-home lighting:

Press Í.

Select Driving functions.

In the corresponding submenus the

following settings can be changed:

Activates or deactivates the

function and adjusts its duration.

Welcome lighting: Activates or

deactivates the function and

adjusts its duration.

Mood lighting: Adjusts the

brightness of the ambient

lighting.

●

Park Assist: Activates advanced

park assist, a parking maneuver

can be selected.

●

Blind spot sensors: Activates or

deactivates side blind spot alert.

Panoramic view system:

Activation / deactivation of the

function.

Instruments and controls

111

confirm that a connection to the

nearest PSAP is being established.

The LED illuminates steadily as long

as the call is active.

Pressing the SOS button immediately

a second time will terminate the call.

The LED switches off.

sent, e.g., in case a breakdown call is

triggered.The emergency call

function will not be impacted.

Status LED in the overhead

console

Illuminates green and red and

extinguishes after a short time, when

the ignition is switched on: the system

works properly.

Illuminates red: fault in the system.

Contact a workshop.

Flashes red: backup battery needs

replacement. Contact a workshop.

Change the privacy settings in the

vehicle by simultaneously pressing

the . button and the SOS button.

Versions with navigation system:

privacy settings can also be changed

in the system settings menu.

Automatic crash notification

In case of an accident with airbag

deployment, an automatic

emergency call is established and an

automatic crash notification will be

transmitted to the next PSAP.

Emergency call

The emergency call function will

establish a connection to the nearest

public safety answering point (PSAP).

A minimum set of data including

vehicle and location information will

be sent to the PSAP.

Breakdown call

Pressing the . button for more than

2 seconds connects you to a roadside

assistance service provider.

For information about coverage and

scope of services of the roadside

assistance, please refer to the

Service and warranty booklet.

Notice

Establishing an emergency call may

not be possible in areas without

sufficient network availability or due

to hardware damage during an

accident.

Privacy settings

Privacy settings of Vauxhall Connect

can be configured in your vehicle.

This will impact the set of data being

In case of an emergency, press the

red SOS button for more than

2 seconds. The LED flashes green to

Instruments and controls for Your Vauxhall Grandland X SUV 2020

Popular Manuals