Vehicle care -> Appearance care for Your Vauxhall Grandland X SUV 2020

246  
Vehicle care  
Screw in the towing eye as far as it will  
go until it stops in a horizontal  
position.  
The lashing eye at the rear  
underneath the vehicle must never be  
used as a towing eye.  
Attach a tow rope – or better still a tow  
rod – to the towing eye.  
The towing eye must only be used for  
towing and not for recovering a  
vehicle.  
If using a vehicle wash, comply with  
the vehicle wash manufacturer's  
instructions. The windscreen wiper  
and rear window wiper must be  
switched off. Remove antenna and  
external accessories such as roof  
racks etc.  
If you wash your vehicle by hand,  
make sure that the insides of the  
wheel housings are also thoroughly  
rinsed out.  
Appearance care  
Exterior care  
Locks  
The locks are lubricated at the factory  
using a high quality lock cylinder  
grease. Use a de-icing agent only  
when absolutely necessary, as this  
has a degreasing effect and impairs  
lock function. After using a de-icing  
agent, have the locks regreased by a  
workshop.  
Wax painted parts of the vehicle  
regularly.  
Caution  
Clean edges and folds on opened  
doors and the bonnet as well as the  
areas they cover.  
Clean bright metal mouldings with a  
cleaning solution approved for  
aluminium to avoid damages.  
Washing  
Drive slowly. Do not drive jerkily.  
Excessive tractive force can  
damage the vehicle.  
The paintwork of your vehicle is  
exposed to environmental influences.  
Wash and wax your vehicle regularly.  
When using automatic vehicle  
washes, select a programme that  
includes waxing.  
After towing, unscrew the towing eye.  
Insert cap with the upper flange into  
the recess and fix cap by pushing.  
Caution  
Bird droppings, dead insects, resin,  
pollen and the like should be cleaned  
off immediately, as they contain  
aggressive constituents which can  
cause paint damage.  
Always use a cleaning agent with  
a pH value of 4 to 9.  
Do not use cleaning agents on hot  
surfaces.  
Vehicle care  
247  
Do not clean the engine compartment  
with a steam-jet or high-pressure jet  
cleaner.  
Thoroughly rinse and leather-off the  
vehicle. Rinse leather frequently. Use  
separate leathers for painted and  
glass surfaces: remnants of wax on  
the windows will impair vision.  
Plastic body parts must not be treated  
with wax or polishing agents.  
Glass panel  
Use a soft lint-free cloth or chamois  
leather together with window cleaner  
to clean the glass panel.  
Windows and wiper blades  
Switch off wipers before handling in  
their areas.  
Use a soft lint-free cloth or chamois  
leather together with window cleaner  
and insect remover.  
When cleaning the rear window from  
inside, always wipe in parallel to the  
heating element to prevent damage.  
For mechanical removal of ice, use a  
sharp-edged ice scraper. Press the  
scraper firmly against the glass so  
that no dirt can get under it and  
scratch the glass.  
Clean smearing wiper blades with a  
soft cloth and window cleaner. Also  
make sure to remove any residues  
such as wax, insect residues and  
similar from the window.  
Wheels and tyres  
Do not use high-pressure jet  
cleaners.  
Clean rims with a pH-neutral wheel  
cleaner.  
Have the door hinges of all doors  
greased by a workshop.  
Exterior lights  
Rims are painted and can be treated  
with the same agents as the body.  
Headlight and other light covers are  
made of plastic. Do not use any  
abrasive or caustic agents, do not use  
an ice scraper, and do not clean them  
dry.  
Paintwork damage  
Rectify minor paintwork damage with  
a touch-up pen before rust forms.  
Have more extensive damage or rust  
areas repaired by a workshop.  
Polishing and waxing  
Wax the vehicle regularly at the latest  
when water no longer beads.  
Otherwise, the paintwork will dry out.  
Polishing is necessary only if the paint  
has become dull or if solid deposits  
have become attached to it.  
Paintwork polish with silicone forms a  
protective film, making waxing  
unnecessary.  
Underbody  
Some areas of the vehicle underbody  
have a PVC undercoating while other  
critical areas have a durable  
Ice residues, pollution and continuous  
wiping on dry windows will damage or  
even destroy the wiper blades.  
protective wax coating.  
After the underbody is washed, check  
the underbody and have it waxed if  
necessary.  
248  
Vehicle care  
Bitumen / rubber materials could  
damage the PVC coating. Have  
underbody work carried out by a  
workshop.  
Before and after winter, wash the  
underbody and have the protective  
wax coating checked.  
Interior care  
Interior and upholstery  
Only clean the vehicle interior,  
including the instrument panel fascia  
and panelling, with a dry cloth or  
interior cleaner.  
Clean the leather upholstery with  
clear water and a soft cloth. In case of  
heavy soiling, use leather care.  
Caution  
Close Velcro fasteners and open  
Velcro fasteners on clothing could  
damage seat upholstery.  
The same applies to clothing with  
sharp-edged objects, e.g. zips,  
belts or studded jeans.  
Liquid gas system  
Plastic and rubber parts  
9 Danger  
The instrument cluster and the  
displays should only be cleaned using  
a soft damp cloth. If necessary use a  
weak soap solution.  
Plastic and rubber parts can be  
cleaned with the same cleaner as  
used to clean the body. Use interior  
cleaner if necessary. Do not use any  
other agent. Avoid solvents and petrol  
in particular. Do not use high-  
pressure jet cleaners.  
Liquid gas is heavier than air and  
can collect in sink points.  
Take care when performing work  
at the underbody in a pit.  
Clean fabric upholstery with a  
vacuum cleaner and brush. Remove  
stains with an upholstery cleaner.  
For painting work and when using a  
drying booth at a temperature above  
60 °C, the liquid gas tank must be  
removed.  
Do not make any modifications to the  
liquid gas system.  
Clothing fabrics may not be  
colourfast. This could cause visible  
discolourations, especially on light-  
coloured upholstery. Removable  
stains and discolourations should be  
cleaned as soon as possible.  
Floor mats  
9 Warning  
If a floor mat has the wrong size or  
is not properly installed, it can  
interfere with the accelerator pedal  
and/or brake pedal, what can  
cause unintended acceleration  
Towing equipment  
Do not clean the coupling ball bar with  
a steam-jet or high-pressure jet  
cleaner.  
Clean seat belts with lukewarm water  
or interior cleaner.  
Vehicle care  
249  
and/or increased stopping  
distance which can cause a crash  
and injury.  
Use the following guidelines for  
proper floor mat usage.  
The original equipped floor mats  
were designed for your vehicle.  
Have damaged floor mats only  
replaced by certified floor mats.  
Always check that the floor mats  
do not interfere with the pedals.  
2. Align slots in the mat with the  
retainers, as shown.  
3. Push the mat to the floor.  
To remove the floor mat:  
Use the floor mat with the correct  
side up. Do not turn it over.  
Do not place anything on top of  
the driver's side floor mat.  
Use only a single floor mat on the  
driver's side.  
1. Move the seat backwards as far  
as possible.  
2. Pull the floor mat upwards to  
remove.  
Installing and removing the floor  
mats  
The driver's side floor mat and the  
passenger's side floor mat are each  
held in place by two retainers.  
To install the floor mat:  
1. Move the seat backwards as far  
as possible.