Vehicle care
225
4. Insert bulb socket and turn
anticlockwise.
Electrical system
5. Insert left end of the light
assembly, slide to the left and
insert right end.
Fuses
Data on the replacement fuse must
match the data on the defective fuse.
There are two fuse boxes in the
Number plate light
vehicle:
Number plate lights are designed as
LEDs and can not be changed.
●
●
engine compartment
instrument panel
Have lights repaired by a workshop in
case of failure.
Before replacing a fuse, turn off the
respective switch and the ignition.
2. Turn bulb socket clockwise and
remove from light assembly.
A blown fuse can be recognised by its
melted wire.
Interior lights
Have the following bulbs replaced by
a workshop:
Caution
●
●
●
courtesy light, reading lights
load compartment light
instrument panel illumination
Do not replace the fuse until the
cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
3. Detach the bulb from the bulb
socket and replace the bulb.
