Get Instruments and controls Guide for Vauxhall Mokka SUV 2020

76

Instruments and controls

Steering wheel controls

Heated steering wheel

Controls

Steering wheel adjustment

Activate heating by pressing *.

Activation is indicated by the LED in

the button.

Heating is operational when the

engine is running.

The Infotainment system and the

cruise control can be operated via the

controls on the steering wheel.

Further information is available in the

Infotainment manual.

Unlock lever, adjust steering wheel,

then engage lever and ensure it is

fully locked.

Do not adjust steering wheel unless

vehicle is stationary and steering

wheel lock has been released.

Cruise control 3 151

Instruments and controls

77

Adjustable wiper interval

Horn

Windscreen wiper/washer

Windscreen wiper

Wiper lever in position INT.

Turn the adjuster wheel to adjust the

desired wipe interval:

Press j.

HI : fast

LO : slow

short interval

long interval

: turn adjuster

wheel upwards

: turn adjuster

wheel downwards

INT : interval wiping or automatic

wiping with rain sensor

OFF : off

For a single wipe when the

windscreen wiper is off, press the

lever down to position 1x.

Do not use if the windscreen is frozen.

Switch off in car washes.

78

Instruments and controls

Automatic wiping with rain sensor

Adjustable sensitivity of the rain

sensor

Windscreen washer

INT : automatic wiping with rain

sensor

Pull lever. Washer fluid is sprayed

onto the windscreen and the wiper

wipes a few times.

Turn the adjuster wheel to adjust the

sensitivity:

The rain sensor detects the amount of

water on the windscreen and

automatically regulates the frequency

of the windscreen wiper.

low sensitivity : turn adjuster

Washer fluid 3 181

wheel downwards

high sensitivity : turn adjuster

wheel upwards

Keep the sensor free from dust, dirt

and ice.

Instruments and controls

Outside temperature

79

Rear window wiper/washer

Push lever. Washer fluid is sprayed

onto the rear window and the wiper

wipes a few times.

Do not use if the rear window is

frozen.

A drop in temperature is indicated

immediately and a rise in temperature

after a time delay.

Press the rocker switch to activate the

rear window wiper:

upper switch

: continuous

operation

Switch off in car washes.

lower switch

: intermittent

operation

The rear window wiper comes on

automatically when the windscreen

wiper is switched on and reverse gear

is engaged.

middle position : off

Activation or deactivation of this

function can be changed in the menu

Settings in the Info-Display.

Washer fluid 3 181

Vehicle personalisation 3 104.

80

Instruments and controls

If outside temperature drops to

0.5 °C, a warning message is

displayed in the Driver Information

Centre.

Set Time

Select Time and Date to display the

respective submenu.

Select Set Time to enter the

respective submenu.

Select Auto Set at the bottom of the

screen. Activate either On - RDS or

Off (Manual).

9 Warning

If Off (Manual) is selected, adjust

The road surface may already be

icy even though the display

indicates a few degrees above 0

°C.

hours and minutes.

Repeatedly select 12-24 HR at the

bottom of the screen to choose a time

mode.

If the 12-hour mode is selected, a

third column for AM and PM selection

is displayed. Select the desired

option.

Clock

Date and time are shown in the

Info-Display.

Set Time Format

Info-Display 3 100.

To select the desired time format,

touch the screen buttons 12 h or 24 h.

Set Date

Graphic-Info-Display

Press MENU to open the respective

audio menu.

Select Set Date to enter the

respective submenu.

Set Date Format

To select the desired date format,

select Set Date Format and choose

between the available options in the

submenu.

Select Auto Set at the bottom of the

screen. Activate either On - RDS or

Off (Manual).

If Off (Manual) is selected, adjust the

date settings.

Auto Set

To choose whether time and date are

to be set automatically or manually,

select Auto Set.

7'' Colour-Info-Display

Press ; and then select Settings.

Select Time and Date.

Instruments and controls

81

For time and date to be set

Notice

automatically, select On - RDS.

If date information is automatically

provided, this menu item is not

available.

For time and date to be set manually,

select Off - Manual. If Auto Set is set

to Off - Manual, the submenu items

Set Time and Set Date become

available.

Select Auto Set at the bottom of the

screen. Activate either On - RDS or

Off - Manual.

If Off - Manual is selected, adjust the

Set time and date

date by touching n or o.

To adjust the time and date settings,

select Set Time or Set Date.

Clock display

Touch + and - to adjust the settings.

8'' Colour-Info-Display

Select Clock Display to enter the

Select Auto Set at the bottom of the

screen. Activate either On - RDS or

Off - Manual.

If Off - Manual is selected, adjust

hours and minutes by touching n or

o.

Touch 12-24 Hr on the right side of the

screen to select a time mode.

If 12-hour mode is selected, a third

column for AM and PM setting is

displayed. Select the desired option.

respective submenu.

To turn off the digital clock display in

the menus, select Off.

Press ; and then select the

Settings icon.

Select Time and Date.

Set time

Select Set Time to enter the

respective submenu.

Set date

Select Set Date to enter the

respective submenu.

82

Instruments and controls

Power outlets

Caution

Do not connect any current

delivering accessories, e.g.

electrical charging devices or

batteries.

Do not damage the outlets by

using unsuitable plugs.

Do not exceed the maximum power

consumption of 150 watts.

With ignition off the power outlet is

deactivated.

Additionally the power outlet is

deactivated in the event of low battery

voltage.

Electrical accessories that are

connected must comply with the

electromagnetic compatibility

requirements laid down in

DIN VDE 40 839.

A 12 Volt power outlet is located in the

front console behind the cover. To

open, push the button.

A further 12 Volt power outlet may be

located in the rear centre console.

Do not exceed the maximum power

consumption of 120 watts.

Depending on equipment, a 230 Volt

power outlet is located in the rear

centre console.

Instruments and controls

83

Midlevel instrument cluster

Odometer

Warning lights, gauges

and indicators

Speedometer

Select ; by pressing Menu on the

turn signal lever. Turn adjuster wheel

and select ;1 or ;2. Each trip

odometer page can be reset

separately by pressing SET/CLR on

the turn signal lever for a few seconds

on the respective menu.

The total recorded distance is

displayed in miles.

Trip odometer

Indicates vehicle speed.

The recorded distance since the last

reset is displayed on the trip computer

page.

Trip odometer counts up to

9,999 miles and then restarts at 0.

Two trip odometer pages are

selectable for different trips.

84

Instruments and controls

Uplevel instrument cluster

Tachometer

Fuel gauge

Select Info page Q by pressing Menu.

Choose page Trip A or Trip B by

turning adjuster wheel on the turn

signal lever.

Each trip odometer page can be reset

separately by pressing SET/CLR on

the turn signal lever for a few seconds

on the respective menu.

Displays the engine speed.

Drive in a low engine speed range for

each gear as much as possible.

Displays the level in the fuel or gas

tank depending on the operation

mode.

The arrow indicates the vehicle side

where the fuel filler flap is located.

Control indicator Y illuminates if the

level in the tank is low. Refuel

immediately if it flashes.

During liquid gas operation, the

system automatically switches over to

petrol operation when gas tanks are

empty 3 85.

Caution

If the needle is in the red warning

zone, the maximum permitted

engine speed is exceeded. Engine

at risk.

Driver Information Centre 3 96.

Never run fuel tank dry.

Instruments and controls

85

Because of the fuel remaining in the

tank, the top-up quantity may be less

than the specified tank capacity.

LED illu‐ : liquid gas operation

minates

Engine coolant temperature

gauge

LED

: liquid gas tank is empty

or failure in liquid gas

system. A message is

displayed in the Driver

Information Centre.

flashes

five

Fuel selector

times

and

extin‐

guishes

As soon as the liquid gas tank is

empty, petrol operation is

automatically engaged until the

ignition is switched off.

Fuel for liquid gas operation 3 166.

Displays the coolant temperature.

50

: engine operating

temperature not yet

reached

Press LPG to switch between petrol

and liquid gas operation. The LED in

the button shows the current

operating mode.

central

area

130

: normal operating

temperature

: temperature too high

LED off : petrol operation

LED

flashes

: checking conditions for

fuel transition to liquid

gas operation.

Illuminates if conditions

are fulfilled.

86

Instruments and controls

Caution

The remaining oil life duration menu

is displayed in the Driver Information

Centre 3 96.

Reset

Press SET/CLR on turn signal lever

for several seconds to reset. The

engine oil life page must be active.

The ignition must be switched on but

engine not running.

If engine coolant temperature is

too high, stop vehicle, switch off

engine. Danger to engine. Check

coolant level.

The system must be reset every time

the engine oil is changed to allow

proper functionality. Seek the

assistance of a workshop.

Service display

The engine oil life system informs

when to change the engine oil and

filter. Based on driving conditions, the

interval at which an engine oil and

filter change will be indicated can vary

considerably.

Next service

When the system has calculated that

engine oil life has diminished, a

warning message appears in the

Driver Information Centre. Have

engine oil and filter changed by a

workshop within one week or

300 miles (whichever occurs first).

Driver Information Centre 3 96.

Service information 3 216.

On Midlevel display select the

Option ? Menu by pressing

MENU on the turn signal lever. Turn

the adjuster wheel to select the

Remaining Oil Life page.

On Uplevel display select the Info Q

Menu by pressing MENU on the turn

signal lever. Turn the adjuster wheel

to select Oil Life page.

Control indicators

The control indicators described are

not present in all vehicles. The

description applies to all instrument

versions. Depending on the

Remaining oil life duration is indicated

in percentage.

Instruments and controls

87

equipment, the position of the control

indicators may vary. When the

ignition is switched on, most control

indicators will illuminate briefly as a

functionality test.

The control indicator colours mean:

red

: danger, important reminder

yellow : warning, information, fault

green : confirmation of activation

blue : confirmation of activation

white : confirmation of activation

Control indicators in the

instrument cluster

Depending on the version, two

instrument clusters are available:

88

Instruments and controls

Midlevel instrument cluster

Instruments and controls

89

Uplevel instrument cluster

90

Instruments and controls

Control indicators in the centre

console

p

Z

Charging system 3 92

I

Y

Engine oil pressure 3 94

Low fuel 3 94

Malfunction indicator light

3 92

d

8

C

f

Immobiliser 3 94

R

u

Brake and clutch system

3 92

Exterior light 3 95

High beam 3 95

Antilock brake system (ABS)

3 92

High beam assist 3 95

R

Gear shifting 3 93

Adaptive forward lighting

3 95

u

Descent control system

3 93

>

r

m

Fog light 3 95

)

n

Lane departure warning

3 93

Rear fog light 3 95

Cruise control 3 95

Overview

Electronic Stability Control off

3 93

O

X

Turn signal 3 90

A

Vehicle detected ahead

3 95

Seat belt reminder, driver

3 91

b

Electronic Stability Control

and Traction Control system

3 93

L

h

Speed limiter 3 95

Traffic sign assistant 3 96

Door open 3 96

Seat belt reminder, front

passenger 3 91

k

Traction Control system off

3 93

v

Airbag and belt tensioners

3 91

!

Preheating 3 93

Turn signal

O illuminates or flashes green.

V / Airbag deactivation 3 92

*

Tyre pressure monitoring

system 3 94

w

Instruments and controls

91

Flashes

Illuminates grey

Illuminates briefly

The parking lights are switched on.

After having started the engine until

the seat belt has been fastened.

Seat belt is unfastened.

Illuminates green

Seat belt has been fastened.

Flashes

A turn signal or the hazard warning

flashers are activated.

Rapid flashing: failure of a turn signal

light or associated fuse, failure of turn

signal light on trailer.

Bulb replacement 3 185, Fuses

3 189.

Seat belt status on rear seats

(vehicles with Midlevel display)

Flashes yellow

X illuminates or flashes white or grey

in the Driver Information Centre, after

having started the engine.

Fastened seat belt has been

unfastened.

Fastening the seat belt 3 44.

Illuminates white

Seat belt is unfastened.

Airbag and belt tensioners

v illuminates red.

Turn signals 3 121.

Illuminates grey

Seat belt has been fastened.

When the ignition is switched on, the

control indicator illuminates for a few

seconds. If it does not illuminate,

does not go out after a few seconds

or illuminates whilst driving, there is a

fault in the airbag system. Seek the

assistance of a workshop. The

airbags and belt pretensioners may

fail to trigger in the event of an

accident.

Seat belt reminder

Seat belt reminder on front seats

X for driver's seat illuminates or

flashes red in the instrument cluster.

k for front passenger seat illuminates

or flashes red in the centre console

when seat is occupied.

Flashes white or grey

Fastened seat belt has been

unfastened.

Fastening the seat belt 3 44.

Seat belt status on rear seats

(vehicles with Uplevel display)

X illuminates green or grey or flashes

yellow in the Driver Information

Centre, after having started the

engine.

Deployment of the belt pretensioners

or airbags is indicated by continuous

illumination of v.

Illuminates

After the ignition has been switched

on until the seat belt has been

fastened.

92

Instruments and controls

Flashes when the engine is

running

Fault that could lead to catalytic

converter damage. Ease up on the

accelerator until the flashing stops.

Seek the assistance of a workshop

immediately.

Charging system

9 Warning

p illuminates red.

Have the cause of the fault

remedied immediately by a

workshop.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Belt pretensioners, airbag system

Illuminates when the engine is

running

3 43, 3 46.

Brake and clutch system

Stop, switch off engine. Battery is not

charging. Engine cooling may be

interrupted. The brake servo unit may

cease to be effective. Seek the

assistance of a workshop.

Airbag deactivation

R illuminates red.

V illuminates yellow.

The brake and clutch fluid level is too

low, when manual parking brake is

not applied 3 181.

The front passenger airbag is

activated.

* illuminates yellow.

The front passenger airbag is

deactivated 3 51.

Malfunction indicator light

9 Warning

Z illuminates or flashes yellow.

Stop. Do not continue your

journey. Consult a workshop.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

9 Danger

Illuminates when the manual parking

brake is applied and ignition is

switched on 3 147.

Risk of fatal injury for a child using

a child restraint system together

with activated front passenger

airbag.

Risk of fatal injury for an adult

person with deactivated front

passenger airbag.

Illuminates when the engine is

running

Fault in the emission control system.

The permitted emission limits may be

exceeded. Seek the assistance of a

workshop immediately.

Antilock brake system

(ABS)

u illuminates yellow.

Instruments and controls

93

Illuminates for a few seconds after the

ignition is switched on. The system is

ready for operation when the control

indicator extinguishes.

If the control indicator does not

extinguish after a few seconds, or if it

illuminates while driving, there is a

fault in the ABS. The brake system

remains operational but without ABS

regulation.

Illuminates

A fault in the system is present.

Continued driving is possible. Driving

stability, however, may deteriorate

depending on road surface

conditions.

Lane departure warning

) illuminates green or flashes yellow.

Illuminates green

System is switched on and ready to

operate.

Have the cause of the fault remedied

by a workshop.

Flashes yellow

System recognises an unintended

lane change.

Flashes

Antilock brake system 3 147.

The system is actively engaged.

Engine output may be reduced and

the vehicle may be braked

Lane departure warning 3 164.

Gear shifting

Electronic Stability Control

off

automatically to a small degree.

R or S with the number of a higher or

lower gear is indicated, when up- or

downshifting is recommended for fuel

saving reasons.

Electronic Stability Control 3 149,

Traction Control system 3 148.

n illuminates yellow.

The system is deactivated.

Traction Control system off

k illuminates yellow.

The system is deactivated.

Descent control system

Electronic Stability Control

and Traction Control system

b illuminates or flashes yellow.

u illuminates or flashes green.

Illuminates green

The system is ready for operation.

Preheating

! illuminates yellow.

Preheating of diesel engine is

activated. Only activates when

outside temperature is low.

Flashes green

The system is in operation.

94

Instruments and controls

Illuminates when the engine is

running

Tyre pressure monitoring

system

w illuminates or flashes yellow.

Do not remove key until vehicle is

stationary, otherwise the steering

wheel lock could engage

unexpectedly.

Caution

Illuminates

Tyre pressure loss. Stop immediately

and check tyre pressure.

Engine lubrication may be

interrupted. This may result in

damage to the engine and/or

locking of the drive wheels.

Check oil level before seeking the

assistance of a workshop 3 179.

Low fuel

Y illuminates or flashes yellow.

Flashes

1. Depress clutch.

Fault in system or tyre without

pressure sensor mounted (e.g. spare

wheel). After 60-90 seconds the

control indicator illuminates

continuously. Consult a workshop.

Tyre pressure monitor system

3 196.

2. Select neutral gear, set selector

Illuminates

Level in fuel tank is too low.

lever to N.

3. Move out of the flow of traffic as

quickly as possible without

impeding other vehicles.

Flashes

Fuel used up. Refuel immediately.

Never run the tank dry.

4. Switch off ignition.

Refuelling 3 168.

Catalytic converter 3 141.

Bleeding the diesel fuel system

3 183.

9 Warning

Engine oil pressure

I illuminates red.

When the engine is off,

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

considerably more force is needed

to brake and steer. During an

Autostop the brake servo unit will

still be operational.

Immobiliser

d flashes yellow.

Fault in the immobiliser system. The

engine cannot be started.

Instruments and controls

95

Have the cause of the fault remedied

by a repairer.

Illuminates

The adaptive forward lighting system

needs a service.

Seek the assistance of a workshop.

Adaptive forward lighting 3 118.

Illuminates white

The system is on.

Illuminates green

Cruise control is active.

Cruise control 3 151.

Exterior light

8 illuminates green.

The exterior lights are on 3 114.

Flashes

High beam

System switched to symmetrical low

beam.

Control indicator f flashes for approx.

4 seconds after the ignition is

switched on as a reminder that the

system has been activated 3 117.

Vehicle detected ahead

C illuminates blue.

A illuminates green or yellow.

Illuminates when high beam is on or

during headlight flash 3 115, or when

high beam is on with high beam

assist, adaptive forward lighting

3 118.

Illuminates green

A vehicle ahead is detected in the

same lane.

Automatic light control 3 115.

Illuminates yellow

High beam assist

Fog light

The distance to a preceding moving

vehicle gets too small or when

approaching another vehicle too

rapidly.

f illuminates green.

> illuminates green.

The front fog lights are on 3 121.

The high beam assist is activated

3 118.

Forward collision alert 3 154.

Rear fog light

r illuminates yellow.

The rear fog light is on 3 121.

Adaptive forward lighting

Speed limiter

f illuminates or flashes yellow.

L illuminates white or green.

Illuminates white

The system is on.

Cruise control

m illuminates white or green.

96

Instruments and controls

Illuminates green

Speed limiter is active. Set speed is

indicated near L symbol.

Midlevel display

Information displays

Driver Information Centre

The Driver Information Centre is

located in the instrument cluster.

Speed limiter 3 153.

Depending on the version and the

Traffic sign assistant

instrument cluster, the Driver

L displays detected traffic signs as a

Information Centre is available as

Midlevel display or Uplevel display.

Driver Information Centre indicates

depending on the equipment:

control indicator.

Traffic sign assistant 3 160.

Door open

●

overall and trip odometer

vehicle information

trip/fuel information

driving economy information

vehicle and warning messages

vehicle settings

h illuminates red.

Main menus are:

A door or the tailgate is open.

●

Trip/fuel information, displayed

by ;, see description below.

Vehicle information, displayed

by ?, see description below.

Eco information, displayed by

@, see description below.

Some of the displayed functions differ

when the vehicle is being driven or at

a standstill and some functions are

only active when the vehicle is being

driven.

Instruments and controls

97

Selecting menus and functions

The menus and functions can be

selected via the buttons on the turn

signal lever.

Vehicle and service messages are

popped up in the Driver Information

Centre if required. Confirm messages

by pressing SET/CLR. Vehicle

messages 3 102.

Uplevel display

Trip/fuel information menu, ;

or Info Q

The following list contains all possible

Info Menu pages. Some may not be

available for your particular vehicle.

Depending on the display, some

functions are symbolised.

Turn the adjuster wheel to select a

Main menus are:

page:

●

Trip/fuel information, displayed

by Info Q, see description below.

●

Trip odometer 1/2 or A/B

Average fuel consumption

Average speed

Digital speed

Fuel range

Instantaneous fuel consumption

Remaining oil life

Tyre pressure

Traffic sign assistant

Following distance

Timer

Press MENU to switch between the

main menus or to return from a

submenu to the next higher menu

level.

Turn the adjuster wheel to select a

submenu of the main menu or to set

a numeric value.

●

Vehicle information, displayed by

Options L, see description

below.

Some of the displayed functions differ

when the vehicle is being driven or at

a standstill and some functions are

only active when the vehicle is being

driven.

Press SET/CLR to select and confirm

a function.

98

Instruments and controls

On Midlevel display the pages

To reset press SET/CLR for a few

seconds.

Remaining Oil Life

Remaining Oil Life, Tyre Pressure,

Traffic Sign Assistant and Following

Distance are displayed in the Vehicle

information menu, select ?.

Indicates an estimate of the oil's

useful life. The number in percentage

means the remainder of current oil life

3 86.

Digital speed

Digital display of the instantaneous

speed.

Trip odometer 1/2 or A/B

Tyre Pressure

Checks tyre pressure of all wheels

during driving 3 196.

Fuel range

Trip odometer displays the current

Range is calculated from current fuel

level and current consumption. The

display shows average values.

distance since a certain reset.

Trip odometer counts up to a distance

of 9,999 miles then restarts at 0.

To reset press SET/CLR for a few

seconds.

The information of trip odometer page

1/A and 2/B can be reset separately

while the respective display is active.

Traffic sign assistant

Displays the detected traffic signs for

the current route section 3 160.

After refuelling, the range is updated

automatically after a brief delay.

When the level in the fuel tank is low,

a message appears on the display

and the control indicator Y in the fuel

gauge illuminates.

Following Distance

Displays the distance in seconds to a

preceding moving vehicle 3 156.

Average Fuel Consumption

Timer

When the fuel tank must be refuelled

immediately, a warning message

appears and remains on the display.

Additionally, the control indicator Y in

the fuel gauge flashes 3 94.

Display of average consumption. The

measurement can be reset at any

time and starts with a default value.

To start and stop follow the

instructions on the display. To reset,

press SET/CLR.

To reset press SET/CLR for a few

seconds.

Eco information menu, @

Instantaneous Fuel Consumption

Display of the instantaneous

consumption.

●

Top consumers

Economy trend

Eco index

Average speed

Display of average speed. The

measurement can be reset at any

time.

Instruments and controls

99

On Uplevel display the pages Top

Consumers, Economy Trend and Eco

index, are displayed in the Trip/fuel

information menu, select Info.

Economy Trend

Simultaneously the average

consumption value is indicated.

Vehicle information menu, ? or

Options L

Top Consumers

The following list contains all possible

Options Menu pages. Some may not

be available for your particular

List of top comfort consumers

currently switched on is displayed in

descending order. Fuel saving

potential is indicated.

vehicle. Depending on the display

some functions are symbolised.

During sporadic driving conditions,

the engine will activate the heated

rear window automatically to increase

the engine load. In this event, the

heated rear window is indicated as

one of the top consumers, without

activation by the driver.

Turn the adjuster wheel to select a

page and follow the instructions given

in the submenus:

●

Units

Displays the average consumption

development over a distance of

31 miles. Filled segments display the

consumption in 3.1 mile steps and

shows the effect of topography or

driving behaviour on fuel

Info pages

Speed warning

Tyre loading

Units

consumption.

Press SET/CLR while units is

displayed. Select imperial or metric

units by turning adjuster wheel.

Confirm by pressing SET/CLR.

Economy index

The current fuel consumption is

indicated on an economic scale. For

economical driving, adapt driving

style to keep the filled segments

within the Eco area. The more

segments are filled, the higher the

fuel consumption.

Info pages

Press SET/CLR while Info pages is

displayed. A list of all items in the Info

Menu is displayed. Select the

100

Instruments and controls

functions to be displayed in the Info

page by turning the adjuster wheel

and confirm by pressing SET/CLR.

Selected pages have a 9 in a

checkbox. Non-viewable functions

have a blank checkbox. See Info

Menu above.

pressing SET/CLR while viewing this

page. If the selected speed limit is

exceeded, a pop-up warning is

displayed with a chime.

The Info displays can indicate:

●

time 3 80

outside temperature 3 79

date 3 80

Infotainment system, see

description in the Infotainment

manual

Tyre Load

The tyre pressure category according

to the actual tyre inflation pressure

can be selected 3 196. Turn the

adjuster wheel to select a category

Light ,Eco or Max.

Speed warning

●

indication of rear view camera

3 159

indication of parking assist

instructions 3 157

navigation, see description in the

Infotainment manual

Press SET/CLR to confirm category.

Info display

The Info-Display is located in the

instrument panel near the instrument

cluster.

●

system messages

settings for vehicle

personalisation 3 104

Depending on the vehicle

configuration the vehicle has a

●

Graphic-Info-Display

or

The speed warning function alerts the

driver when a set speed is exceeded.

●

7'' Colour-Info-Display with

touchscreen functionality

To set the speed warning, press

SET/CLR while the page is displayed.

Turn the adjuster wheel to select and

adjust the value. Press SET/CLR to

set the speed. Once the speed is set,

this feature can be turned off by

or

●

8'' Colour-Info-Display with

touchscreen functionality

Instruments and controls

101

Graphic-Info-Display

8'' Colour-Info-Display

Selecting menus and settings

There are three options to operate the

display:

●

via buttons below the display

by touching the touchscreen with

the finger

●

via speech recognition

Button operation

Press X to switch on the display.

Press ; to display the homepage.

Touch required menu display icon

with the finger.

Touch a respective icon to confirm a

selection.

Touch 9 to return to the next higher

menu level.

Press X to switch on the display.

Press MENU to select main menu

page.

Turn MENU to select a menu page.

Press MENU to confirm a selection.

Press BACK to exit a menu without

changing a setting.

Press ; to return to the homepage.

For further information, see

Infotainment manual.

7'' Colour-Info-Display

Press X to switch on the display.

Press ; to display the homepage.

Turn MENU to select a menu display

icon or a function or to scroll a

submenu list.

Selecting menus and settings

Menus and settings are accessed via

the display.

Vehicle personalisation 3 104.

102

Instruments and controls

Press MENU to confirm a selection.

Press BACK to exit a menu without

changing a setting.

Press ; to return to the homepage.

For further information, see

Infotainment manual.

Valet mode

Vehicle messages

Messages are indicated mainly in the

Driver Information Centre, in some

cases together with a warning chime.

Some functions of the Driver

Information Centre and the Info-

Display can be limited for some

drivers.

Activation or deactivation of valet

mode can be set in the menu

Settings in the vehicle personalisation

menu.

Touchscreen operation

Display must be switched on by

pressing X. Press ; to select

homepage.

Vehicle personalisation 3 104.

For more information see

Infotainment manual.

Touch required menu display icon or

a function with the finger.

Scroll a longer submenu list with the

finger up or down.

Confirm a required function or

selection by touching.

Touch q on the display to exit a

menu without changing a setting.

Press SET/CLR on the turn signal

lever to confirm a message.

Press ; to return to the homepage.

For further information, see

Infotainment manual.

Vehicle and service messages

The vehicle messages are displayed

as text. Follow the instructions given

in the messages.

Speech recognition

Description see Infotainment manual.

Vehicle personalisation 3 104.

Instruments and controls

103

●

If the parking assist detects an

object.

If the fuel level is low.

The warning message or warning

code will disappear after the engine

has been started twice consecutively

without a voltage drop.

If the battery cannot be recharged,

have the cause of the fault remedied

by a workshop.

Warning chimes

When starting the engine or whilst

driving

Only one warning chime will sound at

a time.

The warning chime regarding

unfastened seat belts has priority

over any other warning chime.

When the vehicle is parked and/or

the driver's door is opened

●

With exterior lights on.

During an Autostop

●

If the driver's door is opened.

If any condition for an autostart is

not fulfilled.

●

If a door, the tailgate or bonnet is

open.

●

If seat belt is not fastened.

If a certain speed is exceeded

with parking brake applied.

Battery voltage

When the battery voltage is running

low, a warning message or warning

code 174 will appear in the Driver

Information Centre.

●

If a programmed speed or speed

limit is exceeded.

If a warning message appears in

the Driver Information Centre.

If approaching a vehicle ahead

too closely.

If the electronic key is not in the

passenger compartment.

1. Switch off immediately any

electrical consumers which are

not required for a safe ride, e.g.

seat heating, heated rear window

or other main consumers.

2. Charge the battery by driving

continuously for a while or by

using a charging device.

If an unintended lane change

occurs.

104

Instruments and controls

Vehicle Settings

rear window wiper when reverse

gear is engaged.

Vehicle personalisation

●

Climate and Air Quality

●

Exterior Ambient Lighting

Exterior lighting by unlocking:

Activates or deactivates the entry

lighting.

Auto Fan Max Speed: Modifies

the level of the cabin airflow of the

climate control in automatic

mode.

Auto Heated Seats:

Automatically activates the seat

heating.

Auto Demist: Activates or

deactivates auto demist.

Auto Rear Demist: Activates the

heated rear window

automatically.

The vehicle's behaviour can be

personalised by changing the settings

in the Info-Display.

Depending on vehicle equipment and

country-specific regulations some of

the functions described below may

not be available.

Duration upon exit of vehicle:

Activates or deactivates and

changes the duration of exit

lighting.

Left or Right Hand Traffic:

Changes between lighting for left

or right-hand traffic.

Adaptive Forward Lighting:

Changes the settings of the

functions of the LED headlights.

Some functions are only displayed or

active when the engine is running.

Personal settings

Graphic-Info-Display

Press MENU to open the respective

menu.

Select Settings, scroll through the list

and select Vehicle Settings

●

Park Assist / Collision Detection

Park Assist: Activates or

deactivates the ultrasonic

sensors.

Comfort Settings

Chime Volume: Changes the

volume of warning chimes.

●

Power Door Locks

Stop door lock if door open:

Activates or deactivates the door

locking function while a door is

open.

Personalisation by Driver:

Activates or deactivates the

personalisation function.

Auto Door Lock: Activates or

deactivates the automatic door

locking function after switching

on ignition.

Rear Auto Wipe in Reverse:

In the corresponding submenus the

following settings can be changed:

Activates or deactivates

automatic switching on of the

Instruments and controls

105

Delayed Door Lock: Activates or

deactivates the delayed door

locking function.

Remote Lock, Unlock, and Start

Remote Unlock Feedback:

Activates or deactivates the

hazard warning flasher feedback

whilst unlocking.

Passive Door Lock: Activates or

deactivates the passive locking

function. This feature locks the

vehicle automatically after

several seconds if all doors have

been closed and an electronic

key has been removed from the

vehicle.

Remote Left in Vehicle Alarm:

Activates or deactivates the

warning chime when the

electronic key remains in the

vehicle.

●

Remote Lock Feedback:

Changes what kind of feedback

is given when locking the vehicle.

Remote Door Unlock: Changes

the configuration to unlock only

the driver's door or the whole

vehicle whilst unlocking.

Auto Relock Doors: Activates or

deactivates the automatic relock

function after unlocking without

opening the vehicle.

Remote Window Operation:

Activates or deactivates the

operation of power windows with

remote control.

In the corresponding submenus the

following settings can be changed:

●

Restore Factory Settings:

Resets all settings to the default

settings.

Vehicle

●

Climate & Air Quality

Personal settings

7" Colour-Info-Display

Press ;, select Settings and then

Vehicle on the touch-screen.

Auto Fan Max Speed: Modifies

the level of the cabin airflow of the

climate control in automatic

mode.

Auto Heated Seats:

Automatically activates the seat

heating.

Passive Door Unlock: Changes

the configuration to unlock only

the driver's door or the whole

vehicle whilst unlocking.

Auto Defog: Activates or

deactivates auto demist.

106

Instruments and controls

Auto Rear Defog: Activates the

heated rear window

automatically.

Adaptive Forward Lighting:

Changes the settings of the

functions of the LED headlights.

Relock Remotely Unlocked

Doors: Activates or deactivates

the automatic relock function

after unlocking without opening

the vehicle.

Remote Window Operation:

Activates or deactivates the

operation of power windows with

remote control.

Passive Door Unlock: Changes

the configuration to unlock only

the driver's door or the whole

vehicle whilst unlocking.

Passive Door Lock: Activates or

deactivates the passive locking

function. This feature locks the

vehicle automatically after

several seconds if all doors have

been closed and an electronic

key has been removed from the

vehicle.

●

Collision / Detection Systems

●

Power Door Locks

Park Assist: Activates or

deactivates the ultrasonic

sensors.

Comfort and Convenience

Chime Volume: Changes the

volume of warning chimes.

Personalization By Driver:

Activates or deactivates the

personalisation function.

Auto Wipe in Reverse Gear:

Activates or deactivates

automatic switching on of the

rear window wiper when reverse

gear is engaged.

Unlocked Door Anti Lock Out:

Activates or deactivates the door

locking function while a door is

open.

Auto Door Lock: Activates or

deactivates the automatic door

locking function after switching

on ignition.

Delayed Door Lock: Activates or

deactivates the delayed door

locking function.

●

Remote Lock, Unlock, Start

Remote Unlock Light Feedback:

Activates or deactivates the

hazard warning flasher feedback

whilst unlocking.

●

Lighting

Vehicle Locator Lights: Activates

or deactivates the entry lighting.

Remote Lock Feedback:

Remote Left in Vehicle Alert:

Activates or deactivates the

warning chime when the

electronic key remains in the

vehicle.

Changes what kind of feedback

Exit Lighting: Activates or

deactivates and changes the

duration of exit lighting.

Left or Right Hand Traffic:

Changes between lighting for left

or right-hand traffic.

is given when locking the vehicle.

Remote Door Unlock: Changes

the configuration to unlock only

the driver's door or the whole

vehicle whilst unlocking.

Personal settings

8" Colour-Info-Display

Instruments and controls

107

Press ; then select the SETTINGS

icon.

Auto Rear Demist: Activates the

heated rear window

Adaptive Forward Lighting:

Changes the settings of the

automatically.

functions of the LED headlights.

Power Door Locks

●

Collision / Detection Systems

●

Park Assist: Activates or

deactivates the ultrasonic

sensors.

Unlocked Door Anti-Lockout:

Activates or deactivates the door

locking function while a door is

open.

Comfort and Convenience

Auto Door Lock: Activates or

deactivates the automatic door

locking function after switching

on ignition.

Delayed Door Lock: Activates or

deactivates the delayed door

locking function. This feature

delays the actual locking of the

doors until all doors are closed.

Chime Volume: Changes the

volume of warning chimes.

Personalisation by Driver:

Activates or deactivates the

personalisation function.

Auto Wipe in Reverse Gear:

Activates or deactivates

automatic switching on of the

rear window wiper when reverse

gear is engaged.

In the corresponding submenus the

following settings can be changed:

Vehicle

●

Remote Lock, Unlock, Start

●

Climate and Air Quality

Remote Unlock Light Feedback:

Activates or deactivates the

hazard warning flasher feedback

whilst unlocking.

●

Lighting

Auto Fan Speed: Modifies the

level of the cabin airflow of the

climate control in automatic

mode.

Auto Heated Seats:

Automatically activates the seat

heating.

Vehicle Locator Lights: Activates

or deactivates the entry lighting.

Exit Lighting: Activates or

deactivates and changes the

duration of exit lighting.

Left or Right Hand Traffic:

Changes between lighting for left

or right-hand traffic.

Remote Lock Feedback:

Changes what kind of feedback

is given when locking the vehicle.

Remote Door Unlock: Changes

the configuration to unlock only

Auto Demist: Activates or

deactivates auto demist.

108

Instruments and controls

the driver's door or the whole

vehicle whilst unlocking.

Relock Remote Unlocked Doors:

Activates or deactivates the

automatic relock function after

unlocking without opening the

vehicle.

Remote Window Operation:

Activates or deactivates the

operation of power windows with

remote control.

Passive Door Unlock: Changes

the configuration to unlock only

the driver's door or the whole

vehicle whilst unlocking.

Passive Door Lock: Activates or

deactivates the passive locking

function. This feature locks the

vehicle automatically after

several seconds if all doors have

been closed and an electronic

key has been removed from the

vehicle.

Depending on the equipment of the

vehicle, the following services are

available:

Telematics service

OnStar

OnStar is a personal connectivity and

service assistant with integrated

Wi-Fi hotspot. The OnStar service is

available 24 hours a day, seven days

a week.

●

Emergency services and support

in the case of a vehicle

breakdown

●

Wi-Fi hotspot

Smartphone application

Remote control, e.g. location of

the vehicle, activation of horn and

lights, control of central locking

system

Notice

OnStar is not available for all

markets. For further information,

contact your workshop.

●

Stolen vehicle assistance

Vehicle diagnostics

Destination download

Notice

In order to be available and

operational, OnStar needs a valid

OnStar subscription, functioning

vehicle electrics, mobile service and

GPS satellite link.

Notice

The OnStar module of the vehicle is

deactivated after ten days without an

ignition cycle. Functions requiring a

data connection will be available

again after switching on the ignition.

To activate the OnStar services and

set up an account, press Z and speak

with an advisor.

Remote Left in Vehicle Alert:

Activates or deactivates the

warning chime when the

electronic key remains in the

vehicle.

Instruments and controls

109

SOS button

breakdown, a flat tyre and empty fuel

tank, press Z to establish a

connection to an advisor.

OnStar buttons

Press [ to establish a priority

emergency connection to a specially

trained emergency advisor.

Emergency services

Status LED

In the case of an emergency situation,

press [ and talk to an advisor. The

advisor then contacts emergency or

assistance service providers and

directs them to your vehicle.

Green: The system is ready with

activated transmission of the vehicle

location.

Green flashing: The system is on a

call.

Red: A problem arose.

Off: The system is ready with

deactivated transmission of the

vehicle location or the system is in

standby mode.

Red / green flashing for a short period

of time: The transmission of the

vehicle location has been

deactivated.

In the case of an accident with

activation of airbags or belt

tensioners, an automatic emergency

call is established. The advisor is

immediately connected to your

vehicle to see whether help is

needed.

Privacy button

Press and hold j until a message is

heard to activate or deactivate the

transmission of the vehicle location.

Wi-Fi hotspot

Press j to answer a call or to end a

call to an advisor.

Press j to access the Wi-Fi settings.

The Wi-Fi hotspot of the vehicle

provides internet connectivity with a

maximum speed of 4G/LTE.

OnStar services

Notice

Service button

Press Z to establish a connection to

an advisor.

The Wi-Fi hotspot functionality is not

available for all markets.

General services

If you need any information e.g.

opening hours, points of interest and

destinations or if you need any

support e.g. in the case of a vehicle

Up to seven devices may be

connected.

110

Instruments and controls

To connect a mobile device with the

Wi-Fi hotspot:

The following functions are available:

Stolen vehicle assistance

If the vehicle is stolen, report the theft

to the authorities and request OnStar

stolen vehicle assistance. Use any

phone to call an advisor. Find the

respective OnStar phone number on

our country-specific website.

●

Lock or unlock vehicle.

Honk horn or flash lights.

Check fuel level, engine oil life

and tyre pressure (only with tyre

pressure monitoring system).

1. Press j and then select Wi-Fi

settings on the Info-Display. The

settings displayed include the Wi-

Fi hotspot name (SSID),

password and connection type.

●

Send navigation destination to

the vehicle, if equipped with a

built-in navigation system.

OnStar can provide support in

locating and recovering the vehicle.

Theft alert

When the anti-theft alarm system is

triggered, a notification is sent to

OnStar. You are then informed about

this event by text message or email.

2. Start a Wi-Fi network search on

your mobile device.

3. Select your vehicle hotspot

(SSID) when listed.

●

Locate vehicle on a map.

Manage Wi-Fi settings.

4. When prompted, enter the

To operate these functions, download

the app from App Store^®or

Google Play™ Store.

password on your mobile device.

Notice

Restart prevention

To change the SSID or password,

press Z and talk to an advisor or log

in to your account.

By sending remote signals, OnStar

can prevent the vehicle from

restarting once it has been turned off.

Remote control

If desired, use any phone to call an

advisor, who can remotely operate

specific vehicle functions. Find the

respective OnStar phone number on

our country-specific website.

To switch off the Wi-Fi hotspot

functionality, press Z to call an

advisor.

On-demand diagnostics

At any time e.g. if the vehicle displays

a vehicle message, press Z to

contact an advisor and ask to

complete a real-time diagnostic check

to directly determine the issue.

Depending on the results, the advisor

will provide further support.

Smartphone app

The following functions are available:

With the My Vauxhall smartphone

app, some vehicle functions can be

operated remotely.

●

Lock or unlock vehicle.

Provide information on the

vehicle location.

●

Honk horn or flash lights.

Instruments and controls

111

Diagnostic report

The advisor can look up any address

or point of interest and directly send

the destination to the built-in

navigation system.

Notice

In any case, if the vehicle is disposed

of, sold or otherwise transferred,

immediately inform OnStar about

the changes and terminate the

OnStar service on this vehicle.

The vehicle automatically transmits

diagnostic data to OnStar which

sends a monthly email report to you

and your preferred workshop.

OnStar settings

Notice

Vehicle location

The workshop notification function

can be disabled in your account.

OnStar PIN

The vehicle location is transmitted to

OnStar when service is requested or

triggered. A message on the Info-

Display informs about this

transmission.

To have full access to all OnStar

services, a four-digit PIN is required.

The PIN has to be personalised when

first talking to an advisor.

The report contains the status of key

operating systems of the vehicle like

engine, transmission, airbags, ABS,

and other major systems. It also

provides information on possible

maintenance items and tyre pressure

(only with tyre pressure monitoring

system).

To change the PIN, press Z to call an

advisor.

To activate or deactivate the

transmission of the vehicle location,

press and hold j until an audio

message is heard.

The deactivation is indicated by the

status light flashing red and green for

a short period of time and each time

the vehicle is started.

Account data

An OnStar subscriber has an account

where all the data is stored. To

request a change of the account

information, press Z and talk to an

advisor or log in to your account.

To look at the information in greater

detail, select the link within the email

and log in to your account.

Destination download

If the OnStar service is used on

another vehicle, press Z and request

that the account be transferred to the

new vehicle.

Notice

A desired destination can be directly

If the transmission of the vehicle

location is deactivated, some

services are no longer available.

downloaded to the navigation system.

Press Z to call an advisor and

describe the destination or point of

interest.

112

Instruments and controls

Notice

connection with an advisor will be

established who will check whether

help is needed.

Control buttons

The vehicle location always remains

accessible to OnStar in the case of

an emergency.

9 Danger

Find the privacy policy in your

account.

The service is only available for

markets where it is legally required

and activated. Furthermore, the

manual and the automatic

emergency call function depend

on the availability of the

emergency centres and the

infrastructure in the country.

Software updates

OnStar may remotely carry out

software updates without further

notice or consent. These updates are

to enhance or maintain safety and

security or the operation of the

vehicle.

SOS button K

These updates may concern privacy

issues. Find the privacy policy in your

account.

Notice

Press K and after a prompt press

again to establish an emergency

connection.

In order to be available and

operational, the system requires

functioning vehicle electrics, mobile

service and GLONASS satellite link.

Depending on equipment, a backup

battery is used.

ERA GLONASS

TECT button J

ERA GLONASS is a manually or

automatically actuated emergency

service. Emergency centres provide

assistance and information during an

emergency.

Press J for cancellation of a call or for

service (technician use only).

Status LED

The system provides feedback via

voice messages and an LED.

In case of an accident with activation

of airbags or belt tensioners, an

emergency call is placed

automatically. An immediate

Instruments and controls

113

Green : The system is ready or

within the recall time,

Notice

In very cold conditions it may take a

while to warm up the backup battery.

When operational, the red LED turns

green.

during which the advisor

can call back after an

established connection

(up to approx. two hours,

also possible with ignition

off).

Seek the assistance of a workshop if

the LED does not illuminate after

switching on the ignition.

Green : The system is dialling,

flashing

data transmitting or a

voice connection is

established.

Red

: The system is booting up

for maximum 15 seconds

after switching on ignition,

then the LED turns green.

If the LED stays red or

turns from green to red, a

problem arose seek the

assistance of a workshop.

: Call is not possible, e.g.

because of unavailable

mobile network.

Red

flashing

Red/

: System is in test mode.

Do not press any button

and wait until time-out.

: System is off.

green

flashing

Off

Instruments and controls for Your Vauxhall Mokka SUV 2020

Popular Manuals