Instruments and controls -> Controls for Your Vauxhall Mokka SUV 2020

76  
Instruments and controls  
Steering wheel controls  
Heated steering wheel  
Controls  
Steering wheel adjustment  
Activate heating by pressing *.  
Activation is indicated by the LED in  
the button.  
Heating is operational when the  
engine is running.  
The Infotainment system and the  
cruise control can be operated via the  
controls on the steering wheel.  
Further information is available in the  
Infotainment manual.  
Unlock lever, adjust steering wheel,  
then engage lever and ensure it is  
fully locked.  
Do not adjust steering wheel unless  
vehicle is stationary and steering  
wheel lock has been released.  
Cruise control 3 151  
Instruments and controls  
77  
Adjustable wiper interval  
Horn  
Windscreen wiper/washer  
Windscreen wiper  
Wiper lever in position INT.  
Turn the adjuster wheel to adjust the  
desired wipe interval:  
Press j.  
HI : fast  
LO : slow  
short interval  
long interval  
: turn adjuster  
wheel upwards  
: turn adjuster  
wheel downwards  
INT : interval wiping or automatic  
wiping with rain sensor  
OFF : off  
For a single wipe when the  
windscreen wiper is off, press the  
lever down to position 1x.  
Do not use if the windscreen is frozen.  
Switch off in car washes.  
78  
Instruments and controls  
Automatic wiping with rain sensor  
Adjustable sensitivity of the rain  
sensor  
Windscreen washer  
INT : automatic wiping with rain  
sensor  
Pull lever. Washer fluid is sprayed  
onto the windscreen and the wiper  
wipes a few times.  
Turn the adjuster wheel to adjust the  
sensitivity:  
The rain sensor detects the amount of  
water on the windscreen and  
automatically regulates the frequency  
of the windscreen wiper.  
low sensitivity : turn adjuster  
Washer fluid 3 181  
wheel downwards  
high sensitivity : turn adjuster  
wheel upwards  
Keep the sensor free from dust, dirt  
and ice.  
Instruments and controls  
Outside temperature  
79  
Rear window wiper/washer  
Push lever. Washer fluid is sprayed  
onto the rear window and the wiper  
wipes a few times.  
Do not use if the rear window is  
frozen.  
A drop in temperature is indicated  
immediately and a rise in temperature  
after a time delay.  
Press the rocker switch to activate the  
rear window wiper:  
upper switch  
: continuous  
operation  
Switch off in car washes.  
lower switch  
: intermittent  
operation  
The rear window wiper comes on  
automatically when the windscreen  
wiper is switched on and reverse gear  
is engaged.  
middle position : off  
Activation or deactivation of this  
function can be changed in the menu  
Settings in the Info-Display.  
Washer fluid 3 181  
Vehicle personalisation 3 104.  
80  
Instruments and controls  
If outside temperature drops to  
0.5 °C, a warning message is  
displayed in the Driver Information  
Centre.  
Set Time  
Select Time and Date to display the  
respective submenu.  
Select Set Time to enter the  
respective submenu.  
Select Auto Set at the bottom of the  
screen. Activate either On - RDS or  
Off (Manual).  
9 Warning  
If Off (Manual) is selected, adjust  
The road surface may already be  
icy even though the display  
indicates a few degrees above 0  
°C.  
hours and minutes.  
Repeatedly select 12-24 HR at the  
bottom of the screen to choose a time  
mode.  
If the 12-hour mode is selected, a  
third column for AM and PM selection  
is displayed. Select the desired  
option.  
Clock  
Date and time are shown in the  
Info-Display.  
Set Time Format  
Info-Display 3 100.  
To select the desired time format,  
touch the screen buttons 12 h or 24 h.  
Set Date  
Graphic-Info-Display  
Press MENU to open the respective  
audio menu.  
Select Set Date to enter the  
respective submenu.  
Set Date Format  
To select the desired date format,  
select Set Date Format and choose  
between the available options in the  
submenu.  
Select Auto Set at the bottom of the  
screen. Activate either On - RDS or  
Off (Manual).  
If Off (Manual) is selected, adjust the  
date settings.  
Auto Set  
To choose whether time and date are  
to be set automatically or manually,  
select Auto Set.  
7'' Colour-Info-Display  
Press ; and then select Settings.  
Select Time and Date.  
Instruments and controls  
81  
For time and date to be set  
Notice  
automatically, select On - RDS.  
If date information is automatically  
provided, this menu item is not  
available.  
For time and date to be set manually,  
select Off - Manual. If Auto Set is set  
to Off - Manual, the submenu items  
Set Time and Set Date become  
available.  
Select Auto Set at the bottom of the  
screen. Activate either On - RDS or  
Off - Manual.  
If Off - Manual is selected, adjust the  
Set time and date  
date by touching n or o.  
To adjust the time and date settings,  
select Set Time or Set Date.  
Clock display  
Touch + and - to adjust the settings.  
8'' Colour-Info-Display  
Select Clock Display to enter the  
Select Auto Set at the bottom of the  
screen. Activate either On - RDS or  
Off - Manual.  
If Off - Manual is selected, adjust  
hours and minutes by touching n or  
o.  
Touch 12-24 Hr on the right side of the  
screen to select a time mode.  
If 12-hour mode is selected, a third  
column for AM and PM setting is  
displayed. Select the desired option.  
respective submenu.  
To turn off the digital clock display in  
the menus, select Off.  
Press ; and then select the  
Settings icon.  
Select Time and Date.  
Set time  
Select Set Time to enter the  
respective submenu.  
Set date  
Select Set Date to enter the  
respective submenu.  
82  
Instruments and controls  
Power outlets  
Caution  
Do not connect any current  
delivering accessories, e.g.  
electrical charging devices or  
batteries.  
Do not damage the outlets by  
using unsuitable plugs.  
Do not exceed the maximum power  
consumption of 150 watts.  
With ignition off the power outlet is  
deactivated.  
Additionally the power outlet is  
deactivated in the event of low battery  
voltage.  
Electrical accessories that are  
connected must comply with the  
electromagnetic compatibility  
requirements laid down in  
DIN VDE 40 839.  
A 12 Volt power outlet is located in the  
front console behind the cover. To  
open, push the button.  
A further 12 Volt power outlet may be  
located in the rear centre console.  
Do not exceed the maximum power  
consumption of 120 watts.  
Depending on equipment, a 230 Volt  
power outlet is located in the rear  
centre console.