Get Vehicle care -> Bulb replacement Guide for Vauxhall Mokka SUV 2020

Vehicle care

185

Halogen bulbs

9 Warning

Bulb replacement

Switch off the ignition and turn off the

relevant switch or close the doors.

Halogen bulbs have pressurized

gas inside and can burst if you

drop or scratch the bulb. You or

others could be injured. Be sure to

read and follow the instructions on

the bulb package.

Only hold a new bulb at the base. Do

not touch the bulb glass with bare

hands.

Use only the same bulb type for

replacement.

Replace headlight bulbs from within

the engine compartment.

LED lighting

Passenger side shown, driver side

similar.

On the driver side remove the

windscreen washer bottle filler neck,

before changing a bulb.

1. High beam headlights

2. Low beam headlights

Notice

This vehicle has several LED lights.

For replacement of any LED lighting

assembly, contact a workshop.

After driving in heavy rain or after

washing, some exterior light lenses

could appear frosty.

This condition is caused by the

temperature difference between the

inside and outside of the light.

This is similar to the condensation

on your windows inside your vehicle

during the rain and doesn't indicate

a problem with your vehicle.

If the water leaks into the light bulb

circuitry, have the vehicle checked

by your authorised workshop.

Halogen headlights

Baselevel headlight assembly

The base model vehicle has halogen

high beam and low beam headlights,

an LED turn and lane-change signal,

a sidelight and daytime running lights

on the headlight assembly.

High beam and low beam headlights

1. Open the bonnet. Bonnet 3 178

186

Vehicle care

5. Install the new bulb in the

headlight assembly by turning

clockwise.

Fog lights

The bulbs are accessible from the

underside of the vehicle

6. Reconnect the wiring harness

connector.

7. Install the protective cover.

For the driver side, reinstall the

windscreen washer bottle filler neck

by firmly pushing it straight into the

bottle. Ensure that the filler neck clip

engages into the underhood electrical

centre retainer.

2. Remove the protective cover.

Uplevel headlight assembly

3. Turn the bulb anticlockwise and

pull straight back.

The uplevel model vehicle has LED

high beam and low beam headlights,

a turn and lane-change signal, a

sidelight and daytime running lights

on the headlight assembly.

1. Turn the respective wheel inside

to get better access and remove

three torx screws on outside of

wheel house. Vehicle tools

3 194.

2. Pull and hold lining to get access

to the bulb holder.

4. Disconnect the wiring harness

connector from the bulb.

Vehicle care

187

Tail lights

The vehicle has halogen turn and

lane-change signals, a back-up light

and LED tail/stop lights on the tail light

assembly.

Left-hand side

3. Pull the retaining rib outwards and

remove plug connector from the

bulb socket.

2. First disengage cover by inserting

a screwdriver at the recess. Then

disengage cover at the front and

upper side. Remove cover.

4. Turn the bulb holder anticlockwise

and remove it from the reflector.

5. Remove and replace the bulb

socket with bulb and attach the

plug connector.

6. Insert the bulb socket into the

reflector by turning clockwise and

engage.

1. Disengage both covers at the

respective outer side by inserting

a screwdriver. Remove both

covers and unscrew screws.

Remove the panel.

7. Re-assemble the lining and fasten

the three torx screws.

188

Vehicle care

5. Insert bulb holder into the tail light

assembly. Install tail light

Right-hand side

assembly in body and tighten.

Close covers and engage.

6. Switch on ignition, operate and

check all lights.

Number plate light

3. Turn and lane-change signal light

(1)

1. Remove the storage door and the

tyre repair kit.

Back-up light (2)

1. Prise the light out with a

screwdriver.

2. Remove bulb housing

downwards, taking care not to pull

on the cable.

Rotate bulb holder anticlockwise

to disengage.

4. Remove bulb holder. Remove

and renew bulb.

2. Remove the cover.

Vehicle care

189

3. Remove bulb from holder and

renew bulb.

Fuse extractor

A fuse extractor may be located in the

fuse box in the engine compartment.

Place the fuse extractor on the

various types of use from the top or

side, and withdraw fuse.

Electrical system

4. Insert bulb holder in bulb housing

Fuses

and rotate clockwise.

Data on the replacement fuse must

match the data on the defective fuse.

5. Insert bulb housing and secure

using a screwdriver.

In a box above the positive terminal of

the battery are some main fuses. If

necessary have them changed by a

workshop.

Before replacing a fuse, turn off the

respective switch and the ignition.

Engine compartment fuse

box

A blown fuse can be recognised by its

melted wire. Do not replace the fuse

until the cause of the fault has been

remedied.

Some functions are protected by

several fuses.

Fuses may also be inserted without

existence of a function.

Notice

Not all fuse box descriptions in this

manual may apply to your vehicle.

The fuse box is in the engine

compartment.

Disengage the cover, lift it upwards

and remove.

When inspecting the fuse box, refer

to the fuse box label.

Vehicle care -> Bulb replacement for Your Vauxhall Mokka SUV 2020

Popular Manuals