DISPLAYS AND VOICE CONTROL
||
2. Say "Call [Forename] [Surname]
[number category]", e.g. "Call Robin
Smith Mobile".
e.g. "zero, three, one, two, two, four, four,
three" (03122443).
Cancel voice control
Voice control can be cancelled in different
ways:
House numbers can be spoken individu-
ally or in groups, e.g. "two, two" or
•
> The system dials the selected contact
from the phonebook. If the contact has
several phone numbers (e.g. home,
mobile, work), the right category must
be referred to.
Tap briefly on
Give a long press on the steering wheel
button for voice control until you hear
and say "Cancel".
•
"twenty-two" (22). For English and Dutch,
several groups can be said in sequence,
e.g. "twenty-two, twenty-two" (22 22).
For English, double or triple can be used,
e.g. "double zero" (00). Numbers can be
given within the range 0-2300.
•
two beeps. This stops voice recognition
even when the system is speaking.
Commands/phrases
The following commands can generally be
used, regardless of the situation:
Voice control is also cancelled if you do not
reply during a dialogue. The system will first
ask for a reply three times and if there is still
no response then voice control will be cancel-
led automatically.
Frequencies can be spoken as "ninety
eight point eight" (98.8), "a hundred and
four point two" or "hundred four point
two" (104.2).
•
"Repeat" - repeats the last voice instruc-
•
tion in the ongoing dialogue.
"Cancel" - discontinue the dialogue.18
Speed and repetition mode
It is possible to adjust the speed if the system
is speaking too quickly.
To speed up communication and skip the
prompts from the system, press the steering
•
•
"Help" - starts a help dialogue. The sys-
tem replies with the commands available
in the current situation, a prompt or an
example.
wheel button for voice control
. This can-
cels the system voice and you can say the next
command.
Repetition mode can be enabled so that the
system repeats what you have said.
Commands for specific functions such as
phone and radio are described in specific sec-
tions.
To change the speed or activate/deactivate
repetition mode:
Example of voice recognition control
Press
.
1.
1.
Press Settings in the top view.
Digits
2. Press System Voice Control and
The number commands are stated differently
depending on the function to be controlled:
select settings.
Repeat Voice Command
Speech Rate
•
•
Phone numbers and postcodes must be
spoken individually, number by number,
•
18
Note that this only stops the dialogue when the system is not speaking. To do that, give a long press on
until two beep tones are heard.
132
