DRIVER SUPPORT
|| BLIS is active when the driver's vehicle is trav-
Activating or deactivating BLIS
WARNING
elling at a speed above 10 km/h (6 mph).
The BLIS99 function can be activated or deac-
tivated.
The function is supplementary driver
support intended to facilitate driving
and make it safer – it cannot handle all
situations in all traffic, weather and
road conditions.
•
•
If passing vehicles drive more than 15 km/h
(9 mph) faster than the driver's vehicle, BLIS
will not react.
Activate or deactivate the
function using this button in
the centre display's function
view.
The driver is advised to read all sec-
tions in the Owner's Manual that relate
to this function to learn about factors
such as its limitations and what the
driver should be aware of before using
the system.
The lamp illuminates on the side of the car
where the system has detected the vehicle.
If the car is overtaken on both sides at the
same time then both lamps illuminate.
GREEN button indication – the function is
activated.
•
•
GREY button indication – the function is
deactivated.
Driver support functions are not a sub-
stitute for the driver's attention and
judgement. The driver is always
responsible for ensuring the car is
driven in a safe manner, at the appro-
priate speed, with an appropriate dis-
tance to other vehicles, and in accord-
ance with current traffic rules and reg-
ulations.
•
If BLIS is activated when starting the engine,
the function is confirmed by the door mirror
indicator lamps blinking once.
If BLIS was deactivated when the engine was
switched off, it will continue to be deactivated
when the engine is next started and no indica-
tor lights will then be illuminated.
Related information
Related information
•
Driving support systems (p. 266)
Limitations of BLIS (p. 345)
•
•
•
•
Limitations of BLIS (p. 345)
•
Messages for BLIS (p. 346)
99
Blind Spot Information
344
* Option/accessory.
