LIGHTING
Lighting control
Position Specification
Daytime running lights.
Position Specification
Daytime running lights and posi-
The different lighting controls are used to
control both exterior and interior lighting. The
left-hand stalk switch activates and adjusts
the exterior lighting. The interior brightness is
adjusted using a thumbwheel on the instru-
ment panel.
tion lamps in daylight.
Main beam flash can be used.
Dipped beam and position
lamps in weak daylight or dark-
ness, or when the front fog
lamp* and/or rear fog lamp are
activated.
Daytime running lights and posi-
tion lamps.
Position lamps when the car is
parked.A
Exterior lighting
The Active main beam function
can be activated.
Main beam flash can be used.
Dipped beam and position
lamps.
Main beam can be activated
when dipped beam is switched
on.
Main beam can be activated.
Main beam flash can be used.
Main beam flash can be used.
Active main beam on/off.
A
If the car is stationary but running, the rotating ring can be
moved to
position from another position to switch
Rotating ring in the left-hand stalk switch.
on only the position lamps instead of other lighting.
When the car's electrical system is in ignition
position II, the following functions are availa-
ble for the rotating ring's different positions:
Volvo recommends that
when the vehicle is driven.
mode is used
138
* Option/accessory.
