Lighting -> Rear fog lamp for Your Volvo XC40 SUV 2020

LIGHTING  
Press the button to switch the lights on/off.  
The symbol in the driver display illumi-  
nates when the rear fog lamp is switched on.  
Rear fog lamp  
Brake lights  
The brake light automatically comes on dur-  
ing braking.  
The brake light is illuminated when the brake  
pedal is depressed and when the car is braked  
automatically by one of the driver support sys-  
tems.  
The rear fog lamp is considerably stronger  
than the normal rear lights and should only be  
used in reduced visibility due to fog, snow,  
smoke or dust so that other road users have  
an early warning of a vehicle ahead.  
The rear fog lamp is switched off automatically  
when:  
the car is switched off or when the rotat-  
ing ring on the stalk switch is set to the  
Related information  
position  
the stalk switch's rotating ring is in posi-  
Brake functions (p. 401)  
tion  
and the front fog lamps are  
switched off.  
Changing brake light bulb (p. 605)  
Driving support systems (p. 266)  
Regulations on the use of rear fog lamps  
vary from country to country.  
Button for rear fog lamp.  
Related information  
The rear fog lamp is a lamp at the rear of the  
car, on the driver's side.  
Lighting control (p. 138)  
Front fog lamps/cornering lights* (p. 145)  
Ignition positions (p. 398)  
The rear fog lamp can only be switched on  
when:  
Replacing the rear fog lamp bulb (p. 606)  
ignition position II is active and the rotat-  
ing ring on the stalk switch is in position  
or  
the stalk switch's rotating ring is in posi-  
tion  
and the front fog lamps are  
switched on.  
146  
* Option/accessory.  
 
LIGHTING  
Emergency brake lights  
Emergency brake lights are activated to alert  
vehicles behind about heavy braking.  
Hazard warning flashers  
Hazard warning flashers warn other road  
users by means of all of the car's direction  
indicators being activated simultaneously.  
The function can be used to give a warning in  
the event of traffic hazards.  
Regulations for the use of hazard warning  
flashers may vary between countries.  
The function means that the brake light  
flashes instead of - as in normal braking -  
shining with a constant glow.  
The emergency brake lights are activated dur-  
ing heavy braking or if the ABS system is acti-  
vated at high speeds.  
Related information  
Using direction indicators (p. 143)  
After the driver brakes to a low speed and  
then releases the brake, the brake light returns  
to normal glow.  
The car's hazard warning flashers are acti-  
vated at the same time. These flash until the  
driver accelerates the car to a higher speed  
again or switches off the car's hazard warning  
flashers.  
Button for hazard warning flashers.  
Related information  
Press the button to activate the hazard warn-  
ing flashers.  
Foot brake (p. 401)  
The hazard warning flashers are automatically  
activated when the car brakes so powerfully  
that the emergency brake lights are activated  
and the speed is low. The hazard warning  
flashers start to flash after the emergency  
brake lights have stopped flashing and are  
then deactivated automatically when the car  
drives away again or are deactivated if the but-  
ton is depressed.  
147