Starting and driving -> Ignition positions for Your Volvo XC40 SUV 2020

STARTING AND DRIVING  
Using jump starting with another battery  
(p. 447)  
Ignition positions  
Level Functions  
The car's electrical system can be set in dif-  
ferent levels/positions and in this way make  
the different functions available.  
0
Odometer, clock and tempera-  
ture gauge are illuminatedA.  
In order to facilitate the use of a limited num-  
ber of functions with the engine switched off,  
the car's electrical system can be set in three  
different levels – 0, I and II. These levels are  
described with the denomination "ignition  
position" throughout the owner's manual.  
Power* seats can be adjusted.  
The power windows can be  
used.  
The centre display is started  
and can be usedA.  
The infotainment system can  
be usedA.  
The following table shows the functions avail-  
able in each ignition position/level:  
In this mode, the functions are con-  
trolled by time and are switched off  
automatically after a short while.  
I
Panorama roof, power win-  
dows, 12V power socket in the  
passenger compartment,  
Bluetooth, navigation, phone,  
ventilation fan and windscreen  
wipers can be used.  
Power seats can be adjusted.  
12 V power sockets* in the  
cargo area can be used.  
The infotainment system is  
started automatically if it was  
running when the car was left.  
Power is taken from the battery  
in this ignition position.  
398  
* Option/accessory.  
 
STARTING AND DRIVING  
Ignition position I – Depress the start  
button and release.  
Selecting ignition mode  
Level Functions  
The car's electrical system can be set in dif-  
ferent levels/positions and in this way make  
the different functions available.  
II  
The headlamps come on.  
Ignition position II – Press and hold the  
button depressed for approx. 5 seconds.  
Then release the button.  
Warning/indicator lamps illumi-  
nate for 5 seconds.  
Selecting ignition position  
Several other systems are acti-  
vated. However, heating in seat  
cushions and the rear window  
can only be activated after the  
car has been started.  
Back to ignition position0 – To return to  
ignition position 0 from position I and II –  
press the start button.  
Related information  
Starting the car (p. 396)  
This ignition position consumes a  
lot of current from the battery  
and should therefore be avoided!  
Switching off the car (p. 397)  
A
Adjusting the steering wheel (p. 180)  
Also activated when the door is opened.  
Using jump starting with another battery  
(p. 447)  
Related information  
Starting the car (p. 396)  
Start button location.  
Adjusting the steering wheel (p. 180)  
Ignition position 0 – Unlock the car and  
store the remote control key inside the  
car.  
Using jump starting with another battery  
(p. 447)  
To reach level I or II without starting the  
engine - do not depress the brake pedal, or  
the clutch pedal for cars with manual gear  
changing, when these ignition positions  
are to be selected.  
399