Windows, glass and mirrors for Your Volvo XC40 SUV 2020

Rearview and door mirrors (p. 157)

•

If the starter battery is disconnected, the

automatic opening and closing function

must be reset to work properly. A reset

must take place for pinch protection to

work.

Panorama roof * (p. 160)

•

Power windows (p. 155)

Reset sequence for pinch protection

Related information

(p. 155)

•

Operating power windows (p. 156)

•

Activating and deactivating the heated

windscreen* (p. 200)

•

Operating the panorama roof * (p. 161)

1

Does not apply to the windscreen or panorama roof* which are always laminated and thus do not have this symbol.

154

* Option/accessory.

WINDOWS, GLASS AND MIRRORS

Reset sequence for pinch

protection

If a problem occurs with the electrical func-

tions for the electric windows, a reset

sequence can be tested.

Power windows

WARNING

Each door has a control panel for the electri-

cally-driven power windows. The driver's

door has controls for operating all windows

and also to activate the child safety locks.

Children, other passengers or objects may

be trapped by the moving parts.

Always operate the windows with cau-

tion.

•

WARNING

Do not allow children to play with the

controls.

•

If the starter battery is disconnected, the

automatic opening and closing function

must be reset to work properly. A reset

must take place for pinch protection to

work.

Never leave children alone in the car.

•

Remember to always switch off the

power supply to the power windows

by setting the car's electrical system in

ignition position 0, and then take the

key with you when leaving the car.

If a problem persists, or if it concerns the pan-

oramic roof, contact a workshop².

Never put an object or part of the body

through the windows, even if the car's

electrical system is fully disconnected.

•

Reset the power window

1. Start with the window in closed position.

Driver's door control panel.

2. Then operate the controls in the manual

position 3 times upwards to closed posi-

tion.

Electric child safety locks* that deactivate

the controls in the rear doors to prevent

doors or windows from being opened

from the inside.

Related information

Operating power windows (p. 156)

•

> The system is initialised automatically.

•

Controls for rear windows.

Related information

Reset sequence for pinch protection

•

(p. 155)

•

Controls for front windows.

Operating power windows (p. 156)

•

2

An authorised Volvo workshop is recommended.

* Option/accessory. 155

WINDOWS, GLASS AND MIRRORS

Operating power windows

WARNING

Using the driver's door control panel, all

power windows can be operated - using the

control panels in the other doors operates the

power window in the individual door.

Check that children or other passengers

are not at risk of crushing when all the win-

dows are closed with a remote control key

or keyless opening* with a door handle.

The power windows are equipped with pinch

protection. If any fault arises with the pinch

protection, a reset sequence can be tested.

One way to reduce the pulsating wind

noise when the rear windows are open is

to also open the front windows slightly.

WARNING

Children, other passengers or objects may

be trapped by the moving parts.

Operating the power windows.

Always operate the windows with cau-

tion.

•

Operating without auto. Move one of the

controls gently up or down. The power

windows move up or down as long as the

control is held in position.

The windows cannot be opened at speeds

above approx. 180 km/h (approx.

112 mph), but they can be closed.

Do not allow children to play with the

controls.

•

Operating with auto. Move one of the con-

trols up or down to the end position and

release it. The window runs automatically

to its end position.

Never leave children alone in the car.

•

The driver always bears responsibility for

following traffic regulations in force.

Remember to always switch off the

power supply to the power windows

by setting the car's electrical system in

ignition position 0, and then take the

key with you when leaving the car.

In order for the power windows to be used,

the ignition position must be I or II. The power

windows can be operated for a few minutes

after the car has been switched off and after

the ignition has been switched off - although

not after a door has been opened. It is only

possible to operate one control at a time.

It may not be possible to operate windows

at low temperatures.

Never put an object or part of the body

through the windows, even if the car's

electrical system is fully disconnected.

•

Related information

Power windows (p. 155)

•

Reset sequence for pinch protection

•

It can also be operated using a remote control

key or keyless opening* with the door handle.

(p. 155)

•

156

* Option/accessory.

WINDOWS, GLASS AND MIRRORS

Keyless locking and unlocking* (p. 247)

Angling adjustment of the door mirrors

(p. 159)

•

Rearview and door mirrors

•

The rearview mirrors and door mirrors can be

used to give the driver better visibility to the

rear.

Locking and unlocking with the remote

control key (p. 222)

Activating and deactivating the heated

rear window and door mirrors (p. 201)

Interior rearview mirror

The interior rearview mirror is equipped with

HomeLink*, automatic dimming* and com-

pass*.

The interior rearview mirror is adjusted by

angling it manually.

Door mirrors

WARNING

Both mirrors are bent to provide optimal

vision. Objects may appear to be further

away than they actually are.

The door mirror positions are adjusted with

the joystick in the driver's door control panel.

There are also a number of automatic settings

that can be linked to the memory function but-

tons for the power seat*.

Related information

•

HomeLink^®* (p. 461)

Compass* (p. 465)

Adjusting rearview mirror dimming

(p. 158)

* Option/accessory. 157

WINDOWS, GLASS AND MIRRORS

For the door mirrors to be equipped with auto-

matic dimming, the interior rearview mirror

must also be equipped with automatic dim-

ming.

Adjusting rearview mirror dimming

Automatic dimming*

Bright light from behind is automatically

dimmed by the interior rearview and door mir-

rors. Automatic dimming is always active

while driving, apart from when gearbox

reverse position is selected.

Bright light from behind could be reflected in

the rearview mirrors and dazzle the driver.

Use dimming when disturbed by light from

behind.

Manual dimming

The interior rearview mirror can be dimmed

with a control in the mirror's lower edge.

If the sensors are obscured by e.g. parking

permits, transponders, sun visors or

objects in the seats or in the cargo area in

such a way that light is prevented from

reaching the sensors, then the dimming

function of the interior rearview and door

mirrors is reduced.

Rearview and door mirrors (p. 157)

When sensitivity is changed there is no

immediately noticeable change in dim-

ming, but the change takes place gradu-

ally.

Dimming sensitivity will affect both the interior

rearview mirror and the door mirrors.

Related information

•

To change dimming sensitivity:

Angling adjustment of the door mirrors

(p. 159)

•

1.

Press Settings in the top view in the cen-

tre display.

2. Press My Car Mirrors and

Convenience.

Control for manual dimming.

3.

Under Rearview Mirror Auto Dimming,

select Normal, Dark or Light.

1. Use dimming by moving the control in

towards the passenger compartment.

The interior rearview mirror contains two sen-

sors - one forward facing and one rearward

facing - that work together to identify and

eliminate dazzling light. The forward facing

sensor detects ambient light, while the rear-

ward facing sensor detects the light from vehi-

cle headlights behind.

2. Return to normal mode by moving the

control towards the windscreen.

The control for manual dimming is not availa-

ble on mirrors with automatic dimming.

158

* Option/accessory.

WINDOWS, GLASS AND MIRRORS

2. Adjust the position with the joystick in the

centre.

3. Repeat the above procedure as necessary.

Angling adjustment of the door

mirrors

To ensure better visibility to the rear, the door

mirrors need to be set to the preferences of

the driver.

The mirrors are returned to the original posi-

tion.

3. Press the L or R button again. The light

should no longer be illuminated.

Angling during parking³

A door mirror can be angled down for the

driver to view the side of the road when park-

ing, for example.

Folding in rearview mirrors

electrically*

The mirrors can be retracted for parking/driv-

ing in narrow spaces.

There are a number of automatic settings that

can also be linked to the memory function

buttons for the power seat*.

–

Engage reverse gear and press the L or R

Using controls for door mirrors

1. Depress the L and R buttons simultane-

button.

ously.

Note that the button may need to be pressed

twice, depending on whether it was already

preselected. The button flashes when the door

mirror is angled down. When reverse gear is

disengaged, the door mirror automatically

starts to return after approx. 3 seconds and

then reaches its original position after approx.

8 seconds.

2. Release them after approximately 1 sec-

ond. The mirrors automatically stop in the

fully retracted position.

Fold out the mirrors by pressing down the L

and R buttons simultaneously. The mirrors

automatically stop in the extended position

with the previous setting.

Automatic angling during parking³

With this setting, the door mirror is automati-

cally angled down when reverse gear is

selected. The folded position is preset and

cannot be adjusted.

Resetting to neutral

Mirrors that have been moved out of position

by an external force must be reset electrically

to their original position for electric retracting/

extending* to work correctly.

Controls for door mirrors.

The door mirror positions are adjusted with

the joystick in the driver's door control panel.

Ignition position must be at least I.

1.

Tap on Settings in the centre display's

1. Fold in the door mirrors by pressing down

top view.

the L and R buttons simultaneously.

1. Press the L button for the left-hand door

mirror or the R button for the right-hand

door mirror. The light in the button illumi-

nates.

2. Press My Car Mirrors and

Convenience.

2. Fold them out again by pressing the L

and R buttons simultaneously.

3

Only in combination with power seat with memory buttons*.

}}

* Option/accessory. 159

WINDOWS, GLASS AND MIRRORS

|| 3. Under Exterior Mirror Tilt at Reverse,

select Off, Driver, Passenger or Both to

activate/deactivate and to select which

review mirror should be angled.

Panorama roof*

WARNING

The panorama roof is divided into two glass

sections. The front section can be opened

vertically at the rear edge (ventilation posi-

tion) or horizontally (open position). The rear

section is fixed roof glass.

Children, other passengers or objects may

be trapped by the moving parts.

Always operate the windows with cau-

tion.

•

You can make the door mirror return to its

original position by pressing the L or R button

twice.

Do not allow children to play with the

controls.

•

The panoramic roof has a wind deflector and

a sun blind made of perforated fabric and

located under the glass roof to provide extra

protection from factors such as strong sun-

light.

Automatic retraction when locking*

In the centre display, you can set all the rear-

view and door mirrors to retract/extend auto-

matically when the car is locked/unlocked

using the key.

Never leave children alone in the car.

•

Remember to always switch off the

power supply to the power windows

by setting the car's electrical system in

ignition position 0, and then take the

key with you when leaving the car.

1.

Tap on Settings in the centre display's

top view.

Never put an object or part of the body

through the windows, even if the car's

electrical system is fully disconnected.

•

2. Press My Car Mirrors and

Convenience.

3.

Select Fold Mirror When Locked to acti-

vate/deactivate.

Rearview and door mirrors (p. 157)

However, if the mirrors have been folded in

using the L and R buttons, they have to be

folded out manually as well.

Do not open the panoramic roof when

load carriers are fitted.

•

Do not place any heavy objects on the

panoramic roof.

The panoramic roof and sun blind are operated

with a control located in the roof.

Related information

•

In order that the panoramic roof and the sun

blind can be operated, the car's electrical sys-

tem must be in ignition position I or II.

Adjusting rearview mirror dimming

(p. 158)

•

Activating and deactivating the heated

rear window and door mirrors (p. 201)

•

160

* Option/accessory.

WINDOWS, GLASS AND MIRRORS

Keyless locking and unlocking* (p. 247)

•

Operating the panorama roof*

The panoramic roof and sun blind are oper-

ated with a control in the roof panel and both

are equipped with pinch protection.

Locking and unlocking with the remote

control key (p. 222)

Remove ice and snow before opening

the panoramic roof. Take care not to

scratch surfaces or damage strips.

•

WARNING

Do not operate the panoramic roof if it

has frozen closed.

Children, other passengers or objects may

be trapped by the moving parts.

Always operate the windows with cau-

tion.

•

Wind deflector

Do not allow children to play with the

controls.

•

Never leave children alone in the car.

•

Remember to always switch off the

power supply to the power windows

by setting the car's electrical system in

ignition position 0, and then take the

key with you when leaving the car.

Never put an object or part of the body

through the windows, even if the car's

electrical system is fully disconnected.

•

The panorama roof has a wind deflector that is

raised when the panorama roof is in the open

position.

Operating the panorama roof * (p. 161)

Do not open the panoramic roof when

load carriers are fitted.

•

Related information

•

Do not place any heavy objects on the

panoramic roof.

Automatic closing of the panoramic roof's *

•

sun blind (p. 164)

•

}}

* Option/accessory. 161

WINDOWS, GLASS AND MIRRORS

||

The movement of both panoramic roof and

sun blind are also stopped if the roof control is

operated again in the opposite direction to the

current direction of movement.

Open and close ventilation position

Remove ice and snow before opening

the panoramic roof. Take care not to

scratch surfaces or damage strips.

•

The panoramic roof and the sun blind are also

equipped with pinch protection. If any fault

arises with the pinch protection, a reset

sequence can be tested.

Do not operate the panoramic roof if it

has frozen closed.

In order that the panoramic roof and the sun

blind can be operated, the car's electrical sys-

tem must be in ignition position I or II.

For manual opening, the sun blind must be

fully open before the panoramic roof can

be opened. When the procedure is

reversed, the panoramic roof must be fully

closed before the sun blind can be fully

closed.

It can also be operated using a remote control

key or keyless opening* with the door handle.

Ventilation position, vertically at the rear edge.

Open by pressing the control upward

once.

WARNING

Check that children or other passengers

are not at risk of crushing when all the win-

dows are closed with a remote control key

or keyless opening* with a door handle.

Close by pressing the control downward

once.

When the ventilation position is selected the

front glass cover is raised at its rear edge. If

the sun blind is fully closed when ventilation

position is selected, then it opens automati-

cally approx. 50 mm (approx. 2 inches).

It may not be possible to operate windows

at low temperatures.

Automatic closing of the panoramic roof's *

Check that the panoramic roof is properly

closed when closing.

The sun blind follows automatically if the pan-

oramic roof is closed from ventilation position.

The movement of the roof is stopped if the

control is released during manual operation, or

when the glass reaches the comfort position⁴

or the maximum opening or closing position.

4

Comfort position is a position where wind noise and resonance noise are at a comfortably low level while driving.

162

* Option/accessory.

WINDOWS, GLASS AND MIRRORS

downward to the manual closing position

instead.

Fully open and close the panoramic

roof using the roof control

Related information

Panorama roof * (p. 160)

•

Automatic operation

•

1. Open the sun blind to maximum position -

press the control backward to the position

for automatic opening and release.

sun blind (p. 164)

•

2. Open the panoramic roof to comfort posi-

tion - press the control backwards a sec-

ond time to the position for automatic

opening and release.

Keyless locking and unlocking* (p. 247)

•

Locking and unlocking with the remote

control key (p. 222)

3. Open the panoramic roof to maximum

position - press the control backwards a

third time to the position for automatic

opening and release.

Operation, manual mode

Close by repeating the preceding procedure in

reverse order - press the control forward/

downward to the automatic closing position

instead.

Operation, automatic mode

Manual operation

1. To open the sun blind - press the control

backwards to the position for manual

opening.

Automatic operation - rapid opening or

closing

The panoramic roof and sun blind can be

opened or closed simultaneously:

2. Open the panoramic roof to comfort posi-

tion - press the control backwards a sec-

ond time to the position for manual open-

ing.

–

To open - press the control rearward to

the automatic operation position twice

and release.

3. Open the panoramic roof to maximum

position - press the control backwards a

third time to the position for manual open-

ing.

To close - press the control forward/

downward to the automatic operation

position twice and release.

Close by repeating the preceding procedure in

reverse order - press the control forward/

* Option/accessory. 163

WINDOWS, GLASS AND MIRRORS

Locking and unlocking with the remote

control key (p. 222)

Automatic closing of the

•

Wiper blades and washer fluid

panoramic roof's* sun blind

Together with the washer fluid, the wipers

aim to improve visibility as well as headlamp

pattern.

The washer nozzles are heated* automatically

in cold weather to prevent the washer fluid

from freezing.

With this function, the sun blind is closed

automatically 15 minutes after the car has

been locked if it is parked in hot weather. This

is in order to lower the passenger compart-

ment temperature and protect the car's

upholstery from sun-fading.

The function is deactivated when the car is

supplied from the factory and can be activated

or deactivated in the centre display.

Information indicating that the washer fluid

needs topping up appears in the driver display

when there is approx. 1 litre (1 qt) of washer

fluid remaining.

1.

Press Settings in the top view in the cen-

tre display.

Related information

•

2. Press My Car Locking.

•

Select Auto Close Sunroof Curtain to

activate/deactivate.

•

The sun blind is also closed when all win-

dows are closed using the remote control

key or keyless opening* with a door handle.

Operating the panorama roof * (p. 161)

Filling washer fluid (p. 624)

•

Set the wiper blades in service position

(p. 623)

Related information

Panorama roof * (p. 160)

•

Replacing windscreen wiper blades

(p. 622)

•

Replacing the wiper blade, rear window

(p. 621)

Keyless locking and unlocking* (p. 247)

•

164

* Option/accessory.

WINDOWS, GLASS AND MIRRORS

Using windscreen wipers

Intermittent wiping

•

Move the lever up to switch the wipers

The windscreen wipers are designed to clean

the windscreen. Different settings for the

windscreen wipers are set using the right-

hand stalk switch.

to intermittent wiping. Set the number

of sweeps per time unit with the thumbwheel

when intermittent wiping is selected.

•

Continuous wiping

Filling washer fluid (p. 624)

•

Raise the stalk switch for the wipers to

sweep at normal speed.

Set the wiper blades in service position

(p. 623)

Raise the stalk switch further for the

wipers to sweep at high speed.

Replacing windscreen wiper blades

(p. 622)

•

Replacing the wiper blade, rear window

(p. 621)

Before activating the wipers - ensure that

the wiper blades are not frozen in, and that

any snow or ice on the windscreen and

rear window is scraped away.

Right-hand stalk switch.

The thumbwheel is used to set rain sensor

sensitivity and wiper swipe frequency.

Use plenty of washer fluid when the wipers

are cleaning the windscreen. The wind-

screen must be wet when the windscreen

wipers are operating.

Single sweep

Lower the stalk switch and release to

make one sweep.

Windscreen wipers off

Move the stalk switch to position 0 to

switch off the windscreen wipers.

Related information

•

•

•

165

WINDOWS, GLASS AND MIRRORS

Activate the rain sensor by pressing the rain

sensor button

Using the rain sensor

Related information

•

.

The rain sensor automatically starts the wind-

screen wipers based on how much water it

detects on the windscreen. Rain sensor sen-

sitivity can be adjusted with the thumbwheel

on the right-hand stalk switch.

Move the lever down to make the wipers

move.

•

Turn the thumbwheel upward for higher sensi-

tivity and downward for lower sensitivity. An

extra sweep is made when the thumbwheel is

turned upward.

•

•

Deactivating the rain sensor

Deactivate the rain sensor by pressing the rain

Filling washer fluid (p. 624)

•

sensor button

or moving the stalk

Set the wiper blades in service position

(p. 623)

switch up to another wiper program.

The rain sensor is deactivated automatically in

ignition position 0 or when the engine is

switched off.

Replacing windscreen wiper blades

(p. 622)

•

Replacing the wiper blade, rear window

(p. 621)

The rain sensor is deactivated automatically

when wiper blades are set in service position.

The rain sensor is reactivated when service

mode has been deactivated.

Right-hand stalk switch.

Rain sensor button

Thumbwheel sensitivity/frequency

When the rain sensor is activated, the rain

sensor symbol

display.

is shown in the driver

The windscreen wipers could start and be

damaged in an automatic car wash. Deac-

tivate the rain sensor while the car is run-

ning or when the car's electrical system is

in ignition position I or II. The symbol in the

driver display extinguishes.

Activating the rain sensor

When activating the rain sensor, the car must

be running or in ignition position I or II while

the windscreen wiper stalk switch is in posi-

tion 0 or in the position for a single sweep.

166

WINDOWS, GLASS AND MIRRORS

Set the wiper blades in service position

(p. 623)

Using the rain sensor's memory

function

The rain sensor automatically starts the wind-

screen wipers based on how much water it

detects on the windscreen.

•

Using windscreen and headlamp

washers

Windscreen and headlamp washers are

designed to clean the windscreen and head-

lamps. Windscreen and headlamp washers

are started using the right-hand stalk switch.

Replacing windscreen wiper blades

(p. 622)

Replacing the wiper blade, rear window

(p. 621)

Activating/deactivating the memory

function

The memory function for the rain sensor can

be activated in such a way that the rain sensor

button does not need to be depressed each

time the car is started:

Starting windscreen and headlamp

washers

1.

Press Settings in the top view in the cen-

tre display.

2. Press My Car Wipers.

3.

Select Rain Sensor Memory to activate/

deactivate the memory function.

Related information

•

Washing function, right-hand stalk switch.

•

–

Move the right-hand stalk switch toward

the steering wheel to start the windscreen

and headlamp washers.

•

> The windscreen wipers will make sev-

eral more sweeps once the stalk switch

has been released.

•

Filling washer fluid (p. 624)

•

}}

167

WINDOWS, GLASS AND MIRRORS

||

Filling washer fluid (p. 624)

•

Using the rear window wiper and

washer

The rear windscreen washer and wiper are

designed to clean the rear window. Washing/

wiping is started and settings are changed by

means of the right-hand steering wheel stalk

switch.

Set the wiper blades in service position

(p. 623)

Avoid activating the washer system when

it is frozen or the washer reservoir is

empty, otherwise there is a risk of damag-

ing the pump.

Replacing windscreen wiper blades

(p. 622)

•

Replacing the wiper blade, rear window

(p. 621)

Headlamp washing*

Activating the rear window wiper and

washer

To save fluid, the headlamps are washed auto-

matically at a defined interval when the head-

lamps are switched on.

Reduced washing

The rear window wiper motor is equipped

with overheating protection which means

that it is switched off if it overheats. The

rear window wiper works again after a

cooling-down period.

If only approx. 1 litre (1 qt) of washer fluid

remains in the reservoir and the message

Washer fluid Level low, refill, together with

the

symbol, is shown in the driver dis-

play, then the supply of washer fluid to the

headlamps is switched off. This is to prioritise

cleaning the windscreen and the visibility

through it. The headlamps are only washed if

main or dipped beam is switched on.

Related information

•

•

•

•

168

* Option/accessory.

WINDOWS, GLASS AND MIRRORS

Set the wiper blades in service position

(p. 623)

•

Using automatic rear windscreen

wiping when reversing

Engaging reverse gear while the windscreen

wipers are switched on initiates rear window

wiping. The function stops when reverse gear

is disengaged.

Replacing windscreen wiper blades

(p. 622)

Replacing the wiper blade, rear window

(p. 621)

1.

Press Settings in the top view in the cen-

tre display.

2. Press My Car Wipers.

3.

Select Auto Rear Wiper to activate/deac-

tivate wiping when reversing.

Select

the rear window wiper.

for intermittent wiping with

If the rear windscreen wiper is already operat-

ing at a constant speed then no change takes

place when reverse gear is engaged.

Select

for continuous speed with the

rear window wiper.

Related information

–

Move the right-hand steering wheel stalk

switch forward to start rear window

washing and wiping.

•

•

Related information

•

•

•

•

•

Filling washer fluid (p. 624)

•

Set the wiper blades in service position

(p. 623)

Filling washer fluid (p. 624)

•

Replacing windscreen wiper blades

(p. 622)

•

}}

169

WINDOWS, GLASS AND MIRRORS

||

Replacing the wiper blade, rear window

(p. 621)

•