Lighting -> Using turn signals for Your Volvo XC60 SUV 2020

LIGHTING  
Using turn signals  
Active Bending Lights*  
The vehicle's turn signals are controlled using  
the left-side steering wheel lever. The turn  
signals flash three times or continuously,  
depending on how far up or down the lever is  
moved.  
Active Bending Lights (ABL) are designed to  
help provide extra illumination in curves and  
intersections. Depending on equipment level,  
vehicles with LED3 headlights* may be equip-  
ped with Active Bending Lights.  
This automatic flashing sequence can  
be interrupted by immediately moving  
the lever in the opposite direction.  
If the turn signal indicator flashes more  
quickly than normal, refer to the mes-  
sage in the instrument panel.  
Continuous flashing sequence  
Move the lever up or down as far as possi-  
ble.  
The lever will stop in its end position and can  
be moved back manually or automatically by  
moving the steering wheel.  
Related information  
Hazard warning flashers (p. 161)  
Turn signals.  
Headlight pattern with function deactivated (left) and  
activated (right).  
Adjusting light functions via the center  
display (p. 153)  
Triple flash indicator  
Active Bending Lights follow the movement of  
the steering wheel to help provide extra illumi-  
nation in curves and intersections, helping to  
improve visibility for the driver.  
Move the steering wheel lever up or down  
to the first position and release. The turn  
signals will flash three times. If the func-  
tion is deactivated via the center display,  
the signals will flash once.  
The function is automatically activated when  
the engine is started. If a fault is detected in  
the system, the  
symbol will illuminate in  
the instrument panel and a message will be  
displayed.  
3
LED (Light Emitting Diode)  
158  
* Option/accessory.  
 
LIGHTING  
The function is only active in weak daylight or  
dark conditions and only when the vehicle is  
moving and the low beams are on.  
The front fog lights turn off automatically  
when the ignition is switched off or when the  
Front fog lights/corner  
illumination*  
lighting ring is in position  
.
The fog lights can be activated manually  
when driving in fog and are activated auto-  
matically when backing up to help augment  
the backup light.  
Deactivating/activating the function  
The function is activated as the default factory  
setting and can be activated and deactivated  
in the center display's Function view:  
Regulations concerning fog light use vary  
from country to country.  
If the vehicle is equipped with corner illumi-  
nation*, the fog lights are activated automati-  
cally in weak daylight or dark conditions to  
illuminate the area diagonally in front of the  
vehicle.  
Tap the Active Bending  
Lights button.  
Cornering illumination*  
The front fog lamps can include the cornering  
lights function, which temporarily illuminates  
the area diagonally in front of the car in the  
direction the steering wheel is turned on a  
sharp bend, or in the direction shown by the  
direction indicators.  
Related information  
Adjusting light functions via the center  
display (p. 153)  
The function is activated in weak daylight or  
dark conditions when the lighting ring is in  
or  
mode and the vehicle speed is  
less than about 30 km/h (about 20 mph).  
Both cornering illumination are also illumi-  
nated as a complement to the taillights when  
reversing.  
Front fog lights button.  
The function is activated as the default factory  
setting and can be activated and deactivated  
using the center display.  
The front fog lights can be turned on when the  
ignition is in mode II and the lighting ring is in  
position  
Tap the button to activate or deactivate the  
function. The symbol in the instrument  
,
or  
.
Related information  
Lighting control and panel (p. 152)  
Ignition modes (p. 385)  
panel comes on when the front fog lights are  
on.  
}}  
* Option/accessory. 159  
 
LIGHTING  
The rear fog light turns off automatically when:  
Rear fog light  
The rear fog light is considerably brighter  
than ordinary taillights and should only be  
used to help other road users see the vehicle  
when visibility is reduced by conditions such  
as fog, snow, smoke or dust.  
Adjusting light functions via the center  
display (p. 153)  
the ignition is off or the lighting ring is in  
the position.  
the lighting ring is in the  
position  
and the front fog lights are turned off.  
Regulations concerning rear fog light use  
vary from country to country.  
Related information  
Lighting control and panel (p. 152)  
Ignition modes (p. 385)  
Rear fog light button.  
The rear fog light consists of a light on the rear  
of the vehicle on the driver's side.  
The rear fog light can only be used when:  
ignition mode II is active and the lighting  
ring is in position or  
the lighting ring is in the  
position  
and the front fog lights are on.  
Press the button to switch on/off. The  
symbol in the instrument panel illuminates  
when the rear fog light is on.  
160  
* Option/accessory.